Windsor Bar Link Count

[Andy Rats]

Would anyone be able to help me identify a Windsor bar with the following markings?...32MOU58SNB on one side and...168X 1660 on the other...i would think it would be 32"-.058 but can't figure out the mount code or Chain Link count...the nose sprocket fits a .404 chain and it does mount fine on my XL-925 and my Pioneer P-51...thanks in advance for any information..

 

[Gullet]

I read this on another forum.
Not sure if it accurate or not-

Best bet would be to put the bar on without the cover over it and adjust it about half way then measure with a cloth tape around the bar and drive sprocket then divide what ever you get with the chain pitch doubled.

Not much help-

 

[footstep]

I got an older windsor 32" bar on my ho.elite 550, uses 98 DL hope this helps.

 

[Andy Rats]

I got an older windsor 32" bar on my ho.elite 550, uses 98 DL hope this helps.

Is your bar a .404?...and if so, do u know the manufacturer of the chain?...thanks for your help.

 

[Andy Rats]

I read this on another forum.
Not sure if it accurate or not-


Not much help-

View attachment 420944

thank you

 

[footstep]

Is your bar a .404?...and if so, do u know the manufacturer of the chain?...thanks for your help.

It's an older oregon 3/8 chain, I'll send your bar pics to a guy on HOH he has lots of vintage oregon & windsor dealer catalogs maybe he can get some info for the bar code, will let you know what he says.

 

[Andy Rats]

It's an older oregon 3/8 chain, I'll send your bar pics to a guy on HOH he has lots of vintage oregon & windsor dealer catalogs maybe he can get some info for the bar code, will let you know what he says.

thanks