What's on your bench?

[RI Chevy]

Right on da money Kevin.

 

[WillG]

My furnace/boiler. Sight glass started leaking a while ago so the valves were turned off. Decided to dig in and repair it. Just need a new glass and seal kit which I'll pick up on my way to work tomorrow morning. It sucks not having hot water when you're taking a shower!! Ran out just as I was finishing last night!!

Sent from my E6910 using Tapatalk

 

[WillG]

Got the top end on the 61/272 build. Pretty much just need to rebuild the carb and install it, get some fasteners for the muffler and get her running! Probably going with a 20" or 24" bar on her.

Sent from my E6910 using Tapatalk

 

[M2theB]

064 I got in a box. Seller didn’t know what it was and I didn’t either until poked and got some help here. Thought it was an 046 at first.
I got a 361 in another box in similar condition at the same time.

 

[Mastermind]

Finally got all the 462s done.



Thanks for the new sticker @Canadian farm boy

 

[Spladle160]

I love the new sticker and I don't know if it applies or not but in the construction industry we're ultra careful about using the words design or engineer if we don't carry design and errors and omissions insurance. I hate lawyers.

 

[WillG]

Burnham boiler. New sight glass and seal kit for the sight glass. Cost $6.50 for the glass and seal kit and free labor by me.

Sent from my E6910 using Tapatalk

 

[Mastermind]

Derp Derp

 

[Mastermind]

 

[sonoransaw]

View attachment 227420

Derp Derp

View attachment 227421

Shipping damage???

Those 462s are a sweet sight....

 

[Canadian farm boy]

View attachment 227420

Derp Derp

View attachment 227421

Well *s-word. That sucks

 

[Mastermind]

 

[Mastermind]

Shipping damage???

Those 462s are a sweet sight....

Yeppers

Well *s-word. That sucks

I've lost count of how many flywheel side case halves I've changed.

 

[Canadian farm boy]

Yeppers



I've lost count of how many flywheel side case halves I've changed.

Are you finding the broken saws are still in the original boxes when shipped or have they been repackaged ?

 

[Mastermind]

Are you finding the broken saws are still in the original boxes when shipped or have they been repackaged ?

Factory packaging.

 

[Canadian farm boy]

Factory packaging.

Makes sense. I guess it’s safe to say that anyone that is sending you a new saw in the original box should at least be making sure there’s lots of packaging material in and around the saw to hold it securely.
(Randy loves packing peanuts so fill them boxes up fellas. Lol)

 

[David Young]

Tree72 squish and base cut and some sawsage

View attachment 227212 View attachment 227213

Awww yeah stuff it full

 

[Xr650jkallen]

Got a little 141 today for free. Looked like it had been setting in a mud puddle for years. I thought for sure the p&c would be trash. Saw dont even look like it was ran much at all. Cleaned everything up and she fired right up. Needs a new recoil spring and it'll be ready for some limbs.

 

[sonoransaw]

Got a little 141 today for free. Looked like it had been setting in a mud puddle for years. I thought for sure the p&c would be trash. Saw dont even look like it was ran much at all. Cleaned everything up and she fired right up. Needs a new recoil spring and it'll be ready for some limbs.View attachment 227425

Sweet score!....

 

[WillG]

Finished up my buddy's XL 12 this evening and he's picking it up tomorrow. Just need to run the 4 hp Johnson and return it Sunday. Pressure washer was dropped off last night with a start and stop concern. Found that it will only run on the prime so I wonder what's wrong with it lol.

Sent from my E6910 using Tapatalk