What's on your bench?

[redlight066]

Yes but to what degree I'm not sure. It's been a while since Ive seen a stihl hooked up to a laptop. Someone else will have to chime in on how much info the M-Tronic retains.

 

[Deets066]

 

[redlight066]

That's a huge bish

 

[5000+]

View attachment 149317

Just the facts ma'am

That one really racked up some hours.

 

[stihl_head1982]

View attachment 149351 View attachment 149352

Me see 2 big saws. One on top of bench, and one underneath. Me likey.

 

[Deets066]

Me see 2 big saws. One on top of bench, and one underneath. Me likey.

My likey the one under

 

[Canadian farm boy]

Pioneer Farm saw II in for some work. Needs a coil, some recoil repairs and a carb kit.

 

[460 magnum]

Doing a little clean up for a 576 build

 

[Bigmac]

Me see 2 big saws. One on top of bench, and one underneath. Me likey.

Looks like two big ones under the bench... an 088 and 070/90

 

[Tor R]

Piston and cylinder look great. No other damage thankfully.

long live AT!!!

 

[Deets066]

Looks like two big ones under the bench... an 088 and 070/90

Yup

 

[DND 9000]

Yes but to what degree I'm not sure. It's been a while since Ive seen a stihl hooked up to a laptop. Someone else will have to chime in on how much info the M-Tronic retains.

Availible data is:

Temperature of the control unit (as I know only current)
Operating hours
Number of succsessful starts
Number of unsuccsessful starts
Fuel settings for idle and full throttle
Software revision as a part number

Some machines, don`t know exactly which ones (could only be the newer 4-Mix brushcutters) show operating hours, starts and in % how long the machine was run at idle, part throttle and full throttle.

 

[redlight066]

Availible data is:

Temperature of the control unit (as I know only current)
Operating hours
Number of succsessful starts
Number of unsuccsessful starts
Fuel settings for idle and full throttle
Software revision as a part number

Some machines, don`t know exactly which ones (could only be the newer 4-Mix brushcutters) show operating hours, starts and in % how long the machine was run at idle, part throttle and full throttle.

Much thanks sir

 

[usmcbuckwild]

Hi

 

[Quzick]

long live AT!!!

in 2014-2015, this 545 worked very roughly with these "cagefree bearings"

 

[Sty57]

.

 

[tickbitintn]

.

I'm not familiar with that model.....


Lol

Sent from my XT1635-01 using Tapatalk

 

[Dub11]

.

You running a 372 head on it?

 

[Sty57]

You running a 372 head on it?

272 piston

 

[Sty57]

I'm not familiar with that model.....


Lol

Sent from my XT1635-01 using Tapatalk

It's new........