WAT DIS TOO???

[Moparmyway]

Not sure what this is either. Im guessing small engine tool of some sort.

Sent from my SM-J320W8 using Tapatalk

Briggs & Stratton condenser spring compressor ........... 100%, no doubts

 

[Junior Samples]

Briggs & Stratton condenser spring compressor ........... 100%, no doubts

Good job.

 

[woodtool89]

This was in dads tool box. No clue what it is either.

Sent from my SM-J320W8 using Tapatalk
Ther is a spring inside. The cone part will push in.

it sounds like a spring loaded center for tapping...but idk why it would have such a large body...
the tap center is on the back side of the tap handle in this pic

 

[Junior Samples]

Briggs & Stratton condenser spring compressor ........... 100%, no doubts

I got spring right.

 

[bigbadbob]

These came in a box of yard sale stuff,,,
Made of aluminum.

 

[hseII]

These came in a box of yard sale stuff,,,
Made of aluminum.
View attachment 138746

Those almost look that round gate valve Handle assisters.

Hook it on the handle beside the straight section to aid in opening & closing valves.

 

[bigbadbob]

Those almost look that round gate valve Handle assisters.

Hook it on the handle beside the straight section to aid in opening & closing valves.

Maybe for shut off main for gas meters??

 

[hseII]

Maybe for shut off main for gas meters??

Yesp

 

[Lightning Performance]

Cool thread. I'll get some pics. Been cleaning out old boxes of tools this week.

They made three of those wheel bearing spanner sockets. Had them all at one time. Dana, Spicer and Eaton is what they fit. Covers most of the trucks up to two ton made with separate cone/race and wheel bearing sets. I think the old Diamond Rio's and Toyota were different.

 

[Lightning Performance]

No clue what this is.

Sent from my SM-J320W8 using Tapatalk

I know what this is but don't remember. It is a lifting clamp.

Possibly a three point hitch quick clamp?

 

[Lightning Performance]

View attachment 20621
Any ideas? It has a patent date of July 18, 1898. It has 2 wire cutters, hole punch, screwdriver and an end cutter.

Pretty sure that is a leather saddle builder/repair tool. I had some saddles repaired by our hoof doc when I was a little runt. Yea, I knew what real horse power was. Memory is a bit foggy but it very well could be for leather work. Looks quite familiar.

 

[Dub11]

These came in a box of yard sale stuff,,,
Made of aluminum.
View attachment 138746

Whipping ass stick is what I see.

 

[bigbadbob]

Whipping ass stick is what I see.

Fer midgets???

 

[Hardhack]

View attachment 20621
Any ideas? It has a patent date of July 18, 1898. It has 2 wire cutters, hole punch, screwdriver and an end cutter.

Its a full set of mechanic's tools!

 

[tickbitintn]

This one should be easy. View attachment 23416 View attachment 23417

Theses come in tons of sizes, length, depths... they are very commonly used in m/c and 4-wheelers for swing arm pivots, engine mounts, transmission mounts, final drives and many other applications.

 

[rainierrifleco]

what is this tool?
I have no idea
all 5 wheels at the front rotate independently
Marked: huntington urbana ohio desmond no 1 pat'd
View attachment 18384 View attachment 18385 View attachment 18386 View attachment 18387

Chisel/punch holder..
I have the snap on version....

 

[backhoelover]

it is a chainsaw specialty tool used for one purpose on one oddball variety of one specific model of uncommon chainsaw, and it is useless by itself
for the bonus round name that tool
View attachment 18525 View attachment 18526

Might already know. 880 pressure and vac test. Stihl seals pulled hold it on the cylinder

 

[67L36Driver]

Chisel/punch holder..
I have the snap on version....

Hell no! [emoji849]

Grinding wheel dresser.

 

[Junk Meister]

View attachment 23279 Inch n 3/8 what's this for came in a big box of Williams old 3/4 drive stuff nice box for cheap this is a snap on View attachment 23280 pretty sure it has a specific purpose strange thing it's almost like a spark plug socket but big There is no rubber in there but it rounds inside the socket any clue?

Lug nut socket New Bud wheels are 1-1/2" outer nut 13/16" SQ. intermediate. Now a days most tire repair shops have impacts with extra long anvils.. The older 40's and 50's 1, 1-1/2, and 2 ton trucks had the studs so close to the (axle) hub you needed the length to clear the hub and an extension would lose a lot of impact power as well as aggravate you when it fell apart and the floppy flex err!!!. The round smaller throat is for strength and help pilot/center socket on stud and somewhat protect threads... This socket "WHEN YOU NEED IT" is hard to find. I am replying to a 3 year old post.. DO YOU KNOW WHERE IT IS NOW????

 

[jakethesnake]

Lug nut socket New Bud wheels are 1-1/2" outer nut 13/16" SQ. intermediate. Now a days most tire repair shops have impacts with extra long anvils.. The older 40's and 50's 1, 1-1/2, and 2 ton trucks had the studs so close to the (axle) hub you needed the length to clear the hub and an extension would lose a lot of impact power as well as aggravate you when it fell apart and the floppy flex err!!!. The round smaller throat is for strength and help pilot/center socket on stud and somewhat protect threads... This socket "WHEN YOU NEED IT" is hard to find. I am replying to a 3 year old post.. DO YOU KNOW WHERE IT IS NOW????

Still in the tool box