Vintage Chainsaw Museum

[heimannm]

I am avoiding two man saws for now, just don't know how I'd find room to display them unless I started hanging them from the ceiling...

I have been continuing to work on sorting out bars and chains. I ended up building some long racks mounted up near the ceiling to get them out of the way and still on display (sort or).



Bars for small saws transitioning into the 10 Series



I have a lot of 10 Series bars...



New and used bars of different descriptions for the large saws and some chain storage as well.



Some overflow bar storage.



Mark

 

[Bigmac]

I am avoiding two man saws for now, just don't know how I'd find room to display them unless I started hanging them from the ceiling...

I have been continuing to work on sorting out bars and chains. I ended up building some long racks mounted up near the ceiling to get them out of the way and still on display (sort or).

View attachment 217418

Bars for small saws transitioning into the 10 Series

View attachment 217419

I have a lot of 10 Series bars...

View attachment 217420

New and used bars of different descriptions for the large saws and some chain storage as well.

View attachment 217421

Some overflow bar storage.

View attachment 217422

Mark

Wow Mark! Looks great!

 

[heimannm]

Again the overflow bars with a better view of chain loops, some new, many used.



One of the coolest bars I've uncovered so far, they went to great lengths on the etching on the bar.





Here's one you may not see again...Burns Penfield Rhino-Rail



I still have a large assortment of non-McCulloch branded bars for the 10 Series saws to get up.



Mark

 

[heimannm]

I have a few NOS Homelite bars too.



In addition to what you see here, I have an assortment of used mostly 10 Series bars and an array of used chains put up in the attic; everything from 1/4" pitch to 9/16" pitch. I have been very diligent to get the NOS bars identified and inventoried as much as possible so I can keep track of what I have and perhaps even sell a few to guys who need them.

Mark

 

[Gizzard]

Yes, nice setup and organization. I would be like a kid in a candy store with needing some time to study all.

 

[Gizzard]

Mark, on my mini macs and power mac 6's I have 10, 12, & 14 inch bars. All saws running 1/4 pitch spurs (8t). The 14 inch bars are Mac 6 hardnose and use 71dl and the 12 inch bars are McCulloch sprocket tip bars and use 64dl. For the 10 inch McCulloch hardnose bars (black with yellow McCulloch lettering)I don't have any chains short enough. I have some 58DL loops, but they are to long for the 10 inch bars. Wondering about 55DL or so for them? Maybe you have a reference on that? When I'm home later I can look up bar part number and post a picture of the smaller bars.

 

[Gizzard]

Here is picture of a used one of the smaller 10 inch? Total lg about 11.25in & 9in or so useable. Mac P/N 90630 ZL.

 

[hoskvarna]

I am avoiding two man saws for now, just don't know how I'd find room to display them unless I started hanging them from the ceiling...

I have been continuing to work on sorting out bars and chains. I ended up building some long racks mounted up near the ceiling to get them out of the way and still on display (sort or).

View attachment 217418

Bars for small saws transitioning into the 10 Series

View attachment 217419

I have a lot of 10 Series bars...

View attachment 217420

New and used bars of different descriptions for the large saws and some chain storage as well.

View attachment 217421

Some overflow bar storage.

View attachment 217422

Mark

Nice Mark


Sent from Hoskey Hills

 

[heimannm]

McCulloch Bar and Chain document says the 58 DL for for electric saws only, the Mini Mac uses 55 DL with that bar.

Mark

 

[heimannm]

I think I now have all of the loose bars can chain loops put up on the walls. I still need to do a better job of organizing the chain in boxes but at least for now most everything is where you can find it if you need it.



The mostly non-McCulloch bars have their own little section.



Stop in some time and see the Halverson shock absorbing/self adjusting bar in person.



I also have some Oregon 85 chain which is .404 "self sharpening" and some .404 Kolve style skip chain made in Canada. Still looking for a few small pieces of scratcher chains to work into the chain display.

Mark

 

[Steve]

I think I now have all of the loose bars can chain loops put up on the walls. I still need to do a better job of organizing the chain in boxes but at least for now most everything is where you can find it if you need it.

View attachment 218329

The mostly non-McCulloch bars have their own little section.

View attachment 218330

Stop in some time and see the Halverson shock absorbing/self adjusting bar in person.

View attachment 218331

I also have some Oregon 85 chain which is .404 "self sharpening" and some .404 Kolve style skip chain made in Canada. Still looking for a few small pieces of scratcher chains to work into the chain display.

Mark

I do plan on stopping by to see that Halverson bar Mark. You have a bunch of saw stuff i never knew existed!

 

[heimannm]

I do believe that Mrs. Heimann is embracing my passion, she bought this for me.



Mark

 

[lehman live edge slab]

I got the same shirt along with 2 more for Christmas

 

[tickbitintn]

I do believe that Mrs. Heimann is embracing my passion, she bought this for me.

View attachment 219970

Mark

That is awesome!!!

When one creates an account on these forums one should be auto-shipped to ease the transition to CAD... Lol

Sent from my XT1635-01 using Tapatalk

 

[heimannm]

Thanks to Bjorn and Canadian Farm Boy for hooking me up...something very special arrived today.



I will get it moved over to the museum tomorrow and get some real photos for you to ogle over.

Mark

 

[Steve]

Thanks to Bjorn and Canadian Farm Boy for hooking me up...something very special arrived today.

View attachment 225573

I will get it moved over to the museum tomorrow and get some real photos for you to ogle over.

Mark

Is it tomorrow yet?

 

[Canadian farm boy]

Thanks to Bjorn and Canadian Farm Boy for hooking me up...something very special arrived today.

View attachment 225573

I will get it moved over to the museum tomorrow and get some real photos for you to ogle over.

Mark

Very special indeed. I’m glad it all worked out Mark.

 

[lehman live edge slab]

I see everyone trying to one up my first gas powered homelite I’m donating. Just kidding I’m anxious to see what mark got.

 

[lehman live edge slab]

I’m really anxious to see this museum this spring and also meet some more people from the forum in person. Already have had the pleasure of meeting a few guys at Scott’s when I tried how to demonstrate how to fly.

 

[Dub11]

Is it tomorrow yet?

It is now