PAST Upstate NY GTG 16'

[Deets066]

Deets built me an air box cover, your saw wont stand a chance
You will still be admiring how sexy it looks when I am done cutting

I keep tellin J that it's the filter base that made that saw fast!

 

[Definitive Dave]

I keep tellin J that it's the filter base that made that saw fast!

It's aerodynamic, it cuts through the wind with less friction than a stock cover - I can prove it on my dyno
Dave

 

[Lee H]

That thing doesn't change note...just holds steady RPM and keeps going..
Looks like a damn nice saw.

Sunday was the first time it was put in wood. I fired it off friday night
for the first time. Started in three pulls with an empty carb. I was impressed.
We didn't even put a half tank through it sunday so it ain't even close to
being broke in. It's wearing a new GB 42 incher with Oregon 68LX super
chisel round ground. Fresh loop i spun up. The log was almost 40 inches.
The saw to me pulls hard like a freight train. It was a blast to run.


Lee

 

[Deets066]

Got any close up pics of it?

 

[Lee H]

It likes like a echo remade an 090

That Echo is far superior to an 090. Very smooth for a 116cc saw.

 

[Lee H]

A few close ups.

 

[Deets066]

That Echo is far superior to an 090. Very smooth for a 116cc saw.

I bet it is, looks great!

Clutch cover, dogs, and rear handle look very similar to an 090 is what I was gettin at

 

[Deets066]

Maybe even the recoil a little too

 

[Chris Zautner]

towards the end of the video Is the 441 cm ported by Randy?

 

[MustangMike]

I think we should all pitch in and buy a pair of chaps for Dave.

Jeremy, I think your on to something here ... take a close look ... Heath and Dave, separated at birth ... no wonder the both act so much alike!!!

 

[Hinerman]

A lady in NY posted on AS and needs some help:

http://www.arboristsite.com/community/threads/very-large-trunk.296369/

 

[Hinerman]

How does it oil the big bar? No problem?

 

[SawTroll]

I rest my case.

In all seriousness Nikko, the 461 is a good setup.

Some have said the AV isn't much improved over the 460 - and the 460 is a real vibe monster....

Of course it doesn't matter much on a "cookie" saw.

 

[Lee H]

How does it oil the big bar? No problem?

It seemed to oil ok. I haven't even looked to see if it is adjustable.

 

[Deets066]

Some have said the AV isn't much improved over the 460 - and the 460 is a real vibe monster....

Of course it doesn't matter much on a "cookie" saw.

Yeah, nobody in their right mind would use a 460 for real tree work.

 

[hseII]

Some have said the AV isn't much improved over the 460 - and the 460 is a real vibe monster....

Of course it doesn't matter much on a "cookie" saw.

Bucking for Jeremy's coworker

Taking down Pines for neighbor

Cutting a Pulpwood Truck Load of tops for Firewood

Clearing for Dad's shop

But you're right Nikko: I don't run a saw for a living: I just run one as much as I can when I'm not on the job.

My 460 wasn't too bad.

Thanks for the tip on the Vibs: I'll keep that in mind if I ever need a cookie saw. [emoji6]

 

[hseII]

Yeah, nobody in their right mind would use a 460 for real tree work.

BaHaHaHaHaHaHaHaHaHaHa.

The best tree Service company at home runs 460s as their primary felling & bucking saws.

 

[Adirondackstihl]

Discuss.....

 

[Adirondackstihl]

 

[Adirondackstihl]