Todays snag

[Wilhelm]

Received these from a friend, they were his dads, who bought all new. He wants a running 60c saw for return favour,,done.
View attachment 92341 View attachment 92342 View attachment 92343
And yes that is fresh snow on the ground.

Nice!

Are those drive links on that loose chain worn off or are they like that from the factory?
@Philbert

I've said it before, I really like the embossed logo in that bar!
It would be so cool if manufacturers still did that.

What are You planning on fixing up in the 60cc class for Your friend?

 

[bigbadbob]

Nice!

Are those drive links on that loose chain worn off or are they like that from the factory?
@Philbert

I've said it before, I really like the embossed logo in that bar!
It would be so cool if manufacturers still did that.
What are You planning on fixing up in the 60cc class for Your friend?

Both chains are the same as far as the drive links go, they seem to fit the sprocket well, I would say factory.
He told me the carb was just rebuilt, will try to fire it in the spring, cold here we got snow,,,,,
I ended up giving a 2071, it has cut about 20 cord, I had it since its 2nd tank, near 10yrs ago.
Was an estate deal. Got plenty of 70cc class, saws, two hands,,

 

[Philbert]

Are those drive links on that loose chain worn off or are they like that from the factory?
@Philbert

That's some classic, old school chain. Philbert

 

[bigbadbob]

That's some classic, old school chain. Philbert

It isnt round ground for sure, gonna have to see what will fit the cutters to sharpen, lotsa meat left,,
gotta soak the loose chain as it a tad tight, came from a home a few hundred feet off the Pacific ,,

 

[Philbert]

I find that a drop of 3-In-One oil at each rivet, followed by working each link back-and-forth by hand, works wonders on old chain.

Dissolves old, dried up grease, works through light surface rust, and leaves a lubricating film.

Philbert

 

[Cracker Boy]

Soak em in diesel fuel. And some tranny fluidit hates rust

 

[brandonstclair20]

A shindaiwa 488 for $40 shipped. It locked up while cutting.

Sent from my iPhone using Tapatalk

 

[Frank bierce]

$60

 

[Dub11]

$40and a gas can from Uncle Carl! @67L36Driver. Thanks goodness we met up shipping would of been high lol. And yes its a sweet sweet runner!

 

[Stihlsmoking]

Got this tonight. Is this the older better style ?

 

[Cracker Boy]

$60
View attachment 94350
View attachment 94351

Is that an older dolmar

 

[Dub11]

Is that an older dolmar

I think its big one too! And if it runs well, well you guessed it he suckith once again!

 

[Stihlsmoking]

I think its big one too! And if it runs well, well you guessed it he suckith once again!

I always hate seeing what @Frank bierce finds and brings home ?
West coast big saws cheap. He always sucks. Lol

 

[Dub11]

I always hate seeing what @Frank bierce finds and brings home ?
West coast big saws cheap. He always sucks. Lol

My wife wants to move to the PNW badly. I tell to find that job that pays well cause I might not find work for a while

 

[Cracker Boy]

Yes and yes

 

[Frank bierce]

View attachment 94368 View attachment 94369
$40and a gas can from Uncle Carl! @67L36Driver. Thanks goodness we met up shipping would of been high lol. And yes its a sweet sweet runner!

Nice two fitty!!

 

[Dub11]

Nice two fitty!!

Thanks its not the fastest but it starts, sounds good and is fugging heavy!

 

[Frank bierce]

Thanks its not the fastest but it starts, sounds good and is fugging heavy!

Is what you get when you use one of those!! Lol.

The Dolmar I got is a 120si

 

[Cracker Boy]

My wife want to move to the PNW badly. I tell to find that job that pays well cause I might not find work for a while

What do you do

 

[Cracker Boy]

Is what you get when you use one of those!! Lol.

The Dolmar I got is a 120si

You kill me all we get in fl is homeowner junk 170 180 etc hell they want 350 450 sometimes for a stinkin 026 here its stupid.