STIHL The Official Stihl Chainsaws Thread

[lehman live edge slab]

I thought all the ms 362’s had a one piece muffler with the two screws that have the little push in caps. This one was 2 piece like an older 360 ect. Added second port,opened stock port and advanced timing a little. Weld not very nice I need a tig welder even .023 hard wire trying to trigger weld second port on was to hot. Maybe I’ll gas weld next one.

 

[lehman live edge slab]

Also all the carb adjustment holes are in the plastic even though this is a ms 362c with m tronic.

 

[brandonstclair20]

Trade?

Possibly, what you got?


Sent from my iPhone using Tapatalk

 

[brandonstclair20]

On a stihl MS441, I can still see most of the machining marks but it has these fine scratches. Do you guys think I should replace the piston or just the rings, bearings and seals? Compression is good.

Sent from my iPhone using Tapatalk

 

[PogoInTheWoods]

Pull it apart and see what's in there if you're overly concerned. Somethin' scratched it. What's wrong with the saw otherwise?
Just curious.

 

[brandonstclair20]

Pull it apart and see what's in there if you're overly concerned. Somethin' scratched it. What's wrong with the saw otherwise?
Just curious.

Air leak and a busted crankcase due to poor packaging when the saw was shipped to me.


Sent from my iPhone using Tapatalk

 

[PogoInTheWoods]

Oops. I'd be inclined to just inspect that piston closely and maybe give it a swipe or two with some super lightweight lapping paper to knock down any raised edges on those scratches and run with it. The cylinder may be another story once you inspect that to see what caused the scratches. Hopefully no major flaking. Looks to me like something may have gotten in through the plug hole or some carbon got loose.

 

[Al Smith]

FWIW that's pyrolited carbon on the exhaust port which is just about like sand paper .Restrictive exhaust and set real rich IMO .

 

[how57]

I just picked up this little beauty. The only thing wrong is it has the wrong dogs. Anybody know where I can get a set of OEM ones?

 

[Drptrch]

I just picked up this little beauty. The only thing wrong is it has the wrong dogs. Anybody know where I can get a set of OEM ones?View attachment 128700View attachment 128701View attachment 128702View attachment 128703View attachment 128704

Damn Howard, that’s CLEAN !!


Erik

 

[Drptrch]

I just picked up this little beauty. The only thing wrong is it has the wrong dogs. Anybody know where I can get a set of OEM ones?View attachment 128700View attachment 128701View attachment 128702View attachment 128703View attachment 128704

I’ll check.


Erik

 

[RI Chevy]

Very clean!

 

[how57]

I’ll check.


Erik

That would be greatly appreciated.

H

 

[Drptrch]

That would be greatly appreciated.

H

Have an inner if you want. Thought I had an outer but still checking



Erik

 

[how57]

Have an inner if you want. Thought I had an outer but still checking



Erik

Thanks for looking. But I’m more interested in a larger set. Like these.

 

[Drptrch]

Thanks for looking. But I’m more interested in a larger set. Like these.View attachment 128776

Put a WC sprocket cover on it with roller catcher


Erik

 

[Drptrch]

Put a WC sprocket cover on it with roller catcher


Erik

I Thought you meant you were looking for the stock ones


Erik

 

[how57]

I Thought you meant you were looking for the stock ones


Erik

I did a little more research. According to the IPL Stihl used these for the WC dogs. I have the inner I just need to find an outer.

 

[stihl_head1982]

I just picked up this little beauty. The only thing wrong is it has the wrong dogs. Anybody know where I can get a set of OEM ones?View attachment 128700View attachment 128701View attachment 128702View attachment 128703View attachment 128704

A dream saw in that condition. Jeepers

 

[how57]

A dream saw in that condition. Jeepers

I’m thinking about selling it.