STIHL The Official Stihl Chainsaws Thread

[Sloughfoot]

Told myself I wasn’t going to do this.

 

[singinwoodwackr]

Committed now
Need a new tank

 

[Partner]

Told myself I wasn’t going to do this.

Don't worry the clutch in my trimmer fell apart and I also quickly dismantled the engine unnecessarily

 

[Junk Meister]

Told myself I wasn’t going to do this.

SOMEONE had their Attention Span tuned to a different frequency
If you need a Group Therapy Session ,, I will wager that there are more than a few of us Qualified.

 

[lehman live edge slab]

Told myself I wasn’t going to do this.

Make sure the pan and bottom of cylinder are flat on a piece of glass, I had one 025/250 I fought for a long time and it was because it had a warped pan. Would do all kinds of weird stuff and even run fine at times depending on temp outside.

 

[Sloughfoot]

SOMEONE had their Attention Span tuned to a different frequency
If you need a Group Therapy Session ,, I will wager that there are more than a few of us Qualified.

Complete tear down to replace a manifold.
I was duped.
Needed a thorough cleaning anyway. Didn't it?

 

[Sloughfoot]

Make sure the pan and bottom of cylinder are flat on a piece of glass, I had one 025/250 I fought for a long time and it was because it had a warped pan. Would do all kinds of weird stuff and even run fine at times depending on temp outside.

It wasn't leaking there.

 

[lehman live edge slab]

It wasn't leaking there.

Doesn’t hurt to check since it’s all apart is all I’m saying, may not have leaked there that you know of but I check the clamshells every time I have one apart now

 

[Partner]

Don't worry the clutch in my trimmer fell apart and I also quickly dismantled the engine unnecessarily

At least I checked the degree of carburizing - there was a lot of it, someone had been using it for 10 years and I had been using it for a few years as well

 

[1 stihl nut]

What year is it??

Yep. 2 026.

Ive had these 2 I bought off ebay sitting on a shelf for almost 10 years. They havent interested me because I love playing with the bigger models.

Finally gave them some love, which merely amounted to a light carb cleaning, and tuning. Now I'm completely enamored with them.

Want to set one up for noodling.
Ordered a .325 × .063 x 24 bar and need to make some loops of full chisel skip and make some clutch cover mods to help noodles flow. Don't know why, but I just loved noodling some cottonwood with them. They are small, but they pull nice.

 

[heimannm]

I am putting together an 032 for the display from bits and pieces I had on hand and find I need the air filter cover & nut, and a starter pulley with the pawl & clip. Anyone out there have some bits to spare? As you can see this saw is a beater so the parts don't need to be too nice.



I had a pulley from something else on hand that holds the rope, but it does not actually work with this saw.

Mark

 

[singinwoodwackr]

I am putting together an 032 for the display from bits and pieces I had on hand and find I need the air filter cover & nut, and a starter pulley with the pawl & clip. Anyone out there have some bits to spare? As you can see this saw is a beater so the parts don't need to be too nice.

View attachment 487431

I had a pulley from something else on hand that holds the rope, but it does not actually work with this saw.

Mark

Here was one on CL a month ago for cheap

 

[lehman live edge slab]

I am putting together an 032 for the display from bits and pieces I had on hand and find I need the air filter cover & nut, and a starter pulley with the pawl & clip. Anyone out there have some bits to spare? As you can see this saw is a beater so the parts don't need to be too nice.

View attachment 487431

I had a pulley from something else on hand that holds the rope, but it does not actually work with this saw.

Mark

I have a complete one that’s in better shape with a toast ignition, I can send it and the 040 rewind I still have here now that it’s been located again. Was put in a box to ship and got moved and was in a corner and actually lost for awhile. I found it a couple weeks ago again so it can go with the 032.

 

[nv656]

Anyone know the exact part number for the muffler on a 041 super?

 

[hacskaroly]

Anyone know the exact part number for the muffler on a 041 super?

Looks like 11101400613 and 11101400614

 

[nv656]

Looks like 11101400613 and 11101400614

View attachment 487444

What’s the difference between the 0613 and 0614 though? they are both US firesafe
Models.

 

[singinwoodwackr]

@jacktheripper

 

[lehman live edge slab]

Anyone know the exact part number for the muffler on a 041 super?

Any 041 muffler should work, I have a pile of 041 parts and actually a couple supers. I measured a bunch of them trying to figure out if any different between super and regular. While I found a few with a slightly larger tube between the flange and can the restriction is the exhaust port and flange. Since this is the case ant muffler should work weather it’s the single outlet or the old 4-5 slit style ect.

 

[lehman live edge slab]

I am putting together an 032 for the display from bits and pieces I had on hand and find I need the air filter cover & nut, and a starter pulley with the pawl & clip. Anyone out there have some bits to spare? As you can see this saw is a beater so the parts don't need to be too nice.

View attachment 487431

I had a pulley from something else on hand that holds the rope, but it does not actually work with this saw.

Mark

Here’s the 032, it and the 040 rewind will go out Monday

 

[lehman live edge slab]

It’s in my truck to drop off Monday