DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[old_sir_henry]

The above reminds me of this one:



My PS-6100 with Oregon Powermatch 20" bar. I used that one very few times when I had to cut strong lumber
not having a bigger/stronger saw. B&C have been sold since bigger saws are here, the 6100 is still here, well and kickin'.

 

[Wilhelm]

What size bar are You running on Your PS-6100?

 

[old_sir_henry]

And as this thread seem to need some bumping:

New arrival these days:





SACHS-DOLMAR 101 hobby as parts supply for other Poulan micros.

So I could have posted this in the Poulan thread but brand loyalty kept me from doing so.

The 101 however is mainly intended to supply parts for this little bugger:




Yet another Poulan micro in my tiny collection.
Should I rather have posted this post in the Poulan thread?

 

[old_sir_henry]

What size bar are You running on Your PS-6100?

Usually 45 cm. The 63 cm / 20" was special use only.

 

[Wilhelm]

Usually 45 cm. The 63 cm / 20" was special use only.

63cm is more like a 25", if that's what it was then I agree - not what the 6100 is designed for.

I have a 50cm/20" on mine, she handles it well being a MMWS.
On a stock 6100 I imagine I'd like a 40cm/16" to 45cm/18" better.

I have a 50cm/20" on my XS5000, it is not a very good match - Kevin ground and lathed too much of the cylinder off and she is now nose heavy with that B&C setup.
I am considering to fill the area between the cylinder fins with lead to regain balance.

 

[ajschainsaws]

Starting to really like this unit. Thanks again for the wrap handle bars Andrew.

View attachment 280540

looking good stefaan must dig my 6100 out the lockup

 

[ajschainsaws]

And as this thread seem to need some bumping:

New arrival these days:

View attachment 281412

View attachment 281413

SACHS-DOLMAR 101 hobby as parts supply for other Poulan micros.

So I could have posted this in the Poulan thread but brand loyalty kept me from doing so.

The 101 however is mainly intended to supply parts for this little bugger:


View attachment 281414

Yet another Poulan micro in my tiny collection.
Should I rather have posted this post in the Poulan thread?

Are you still looking for a 5200 had one come in this week

 

[Wilhelm]

Yesterdays bucking action

 

[old_sir_henry]

63cm is more like a 25", if that's what it was then I agree - not what the 6100 is designed for.

I absolutely agree, my memory did play tricks on me: The bar in question was a 248RNDK095 that is 24" not 20".
And the 6100 isn't designed to handle this length on a regular basis, but it can, provided you are cautious and
let the saw find its own speed thru the wood. Even Dolmar offers a 63cm bar for the 6100.

BTW: The 24" bar has been sold 2 years ago, since in the meantime I have saws designed to handle that length, only back in 2015 I hadn't.

 

[old_sir_henry]

Are you still looking for a 5200 had one come in this week

Yes, haven't found one yet. P/N me for details please.

 

[Wilhelm]

Yes, haven't found one yet. P/N me for details please.

I don't think AJ knows what a "Persoenliche Nachricht" is, You might wanna ask him to send You a "Personal Message - PM".

Having multiple languages in Your head can be a bit©h, right!?

How is the German chainsaw forum?
Haven't logged in there in a long while, just don't have the time to track stuff on multiple places.

 

[FederalQ]

Is there a link to the German forum? The search engines do not give me anything but this site and arboristsite. I even tried Deutsche Kettensaege forum as a query.

 

[Wilhelm]

Is there a link to the German forum? The search engines do not give me anything but this site and arboristsite. I even tried Deutsche Kettensaege forum as a query.

http://motorsaegen-portal.de/

 

[old_sir_henry]

Having multiple languages in Your head can be a bit©h, right!?

Definitely, although I was thinking of a Personal Note when writing P/N

 

[Wilhelm]

Definitely, although I was thinking of a Personal Note when writing P/N

Touchee!

 

[popopboat]

Came across this picture on the local ad.
Appears to be Dolmar CA
What are those things on the recoil cover?
Cant distinguish if sparkplug wire or fuel lines something.

 

[ajschainsaws]

I don't think AJ knows what a "Persoenliche Nachricht" is, You might wanna ask him to send You a "Personal Message - PM".

Having multiple languages in Your head can be a bit©h, right!?

How is the German chainsaw forum?
Haven't logged in there in a long while, just don't have the time to track stuff on multiple places.

Hey there Wilhelm I can manage pretty well spent 12 + years in middle Europe mostly
Germany Lkw MIT anhanger pferde transporter

Aachen breakfast bockwurst bread roll mustard
Wurzburg lunch bratwurst kartoffe salad
Passau dinner currywurst ein bier

 

[ajschainsaws]

Came across this picture on the local ad.
Appears to be Dolmar CA
What are those things on the recoil cover?
Cant distinguish if sparkplug wire or fuel lines something.


View attachment 282308

There oil lines

 

[popopboat]

There oil lines

Oh, somehow couldnt remember an oil line lol.
Well, thats a funky way to conduct it.

 

[Wilhelm]

Oh, somehow couldnt remember an oil line lol.
Well, thats a funky way to conduct it.

If the pump dies You suck oil out of the pickup line and then spit it back into the outlet line.
The exposed lines grant easy access.