DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[Black Dog Chainsaw]

Gingers will steal your soul.

Ummm... They definitely have their own temperament, and I would know living with more than one...

 

[Wilhelm]

Your chainsaws are missing in that family picture!

 

[Dub11]

View attachment 204920

I could use a 50 in that color

 

[Graf]

What is this model? Sachs Dolmar 11?


Walbro HDA22, bore 45mm, knob for air filter cover.

Overworked saw, low compression... former owner was an animal

 

[cuttinscott]

What is this model? Sachs Dolmar 11?
View attachment 205501 View attachment 205502

Walbro HDA22, bore 45mm, knob for air filter cover.

Overworked saw, low compression... former owner was an animal

Sachs Dolmar 114

The serial number is right there on the oxidized pad top right first three digits are model number

 

[kfd518]

Well I got my box of parts today, gonna get the case half powdered tonite as long as my oven will get up to temp with the cold temps here. Might have to help it along a bit.
Thanks for the help with parts @166 , and @ajschainsaws!

 

[Graf]

Sachs Dolmar 114

The serial number is right there on the oxidized pad top right first three digits are model number

Thanks for your help, I realized which model it is, first three digits are 116

 

[cuttinscott]

So that makes it a 56cc 116 all the 116 I sold had the bing carburator. A full picture would of have a better answer because of different hoods. Vintage 1984-1985

 

[old_sir_henry]

So that makes it a 56cc 116 all the 116 I sold had the bing carburator. A full picture would of have a better answer because of different hoods. Vintage 1984-1985

Strange, I never had a 116 with a BING carb and HDA22 belongs to Sachs-Dolmar 114 or 117.
116 should have HDA23.
Maybe your saw is somewhat patchwork?

 

[old_sir_henry]

I finished rebuilding an old Sachs-Dolmar 110 these days.

Very early saw from 1984, still has the narrow support for the wrap-handle above
the brake and still is rated 2.0 kW. My later 1986 110s were rated at 2.1 kW.

The label on the starter housing is NOS, was still available at Dolmar dealers,
the brake cover and chainbrake is NOS as well, bought a while ago because it
was offered pretty cheap.
The saw has been sitting around for almost 2 years with me having no plan of what
to with her. Some parts even missing. (Choke switch, hood ...)
Finally I did inspect her and found the substance quite good and decided to
go hunting for the missing parts.

So here she is:









As you might expect she's a good runner

 

[Graf]

Maybe your saw is somewhat patchwork?

If you're referring to me, I cannot exclude it, there are some slightly spoiled screw head probably someone worked on it time ago

 

[old_sir_henry]

If you're referring to me

Yes I did with my last sentence. Sorry for the ambiguity.

 

[Graf]

No problem, sir

Btw I was able to start the engine but due to cylinder conditions it is difficult to set up a good carburation, however I'm glad to hear its voice

 

[dahmer]

Just picked up a NOS smurf Makita 7301. It has the smaller inner felling dog but no outer dog. The paint in the tapped holes has never been disturbed so it came with no outer dog. Is a smaller matching outer dog available? I can’t seem to find one listed on the parts diagrams I’ve been able to find. Thanks.

 

[Johnmn]

Just picked up a NOS smurf Makita 7301. It has the smaller inner felling dog but no outer dog. The paint in the tapped holes has never been disturbed so it came with no outer dog. Is a smaller matching outer dog available? I can’t seem to find one listed on the parts diagrams I’ve been able to find. Thanks.

@Wilhelm

 

[Wilhelm]

Just picked up a NOS smurf Makita 7301. It has the smaller inner felling dog but no outer dog. The paint in the tapped holes has never been disturbed so it came with no outer dog. Is a smaller matching outer dog available? I can’t seem to find one listed on the parts diagrams I’ve been able to find. Thanks.

Yes, outer OEM small European spike is available in Europe.
I may even have a new spare one, I'll have a look at my parts stash after work and let You know.

 

[Black Dog Chainsaw]

And while wilhelm digs in his parts I’ll post some pics of the current project.

What!?!?! A NOS Oregon SuperTronic...!!

78DL fits very nicely with 8pin... thinking 9–10pin?

Thinking trim tail a bit and put a 9-10pin on?

 

[RI Chevy]

Nice!

 

[Dub11]

And while wilhelm digs in his parts I’ll post some pics of the current project.

What!?!?! A NOS Oregon SuperTronic...!!

78DL fits very nicely with 8pin... thinking 9–10pin?

Thinking trim tail a bit and put a 9-10pin on?

Yeth

 

[Wilhelm]

And while wilhelm digs in his parts I’ll post some pics of the current project.

What!?!?! A NOS Oregon SuperTronic...!!

78DL fits very nicely with 8pin... thinking 9–10pin?

Thinking trim tail a bit and put a 9-10pin on?

I dug, assessed and PM'd yesterday.
It is up to Mark from here on.

I like the look of that bar, it looks great on the big Makita.