DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[WKEND LUMBERJAK]

Well, turns out this is all just a learning experience. This morning he brought in his non sale 7910 that I rebuilt last winter and wants me to take the cylinder, piston, and muffler off of it and put on this saw. Ok, will do. Haven't looked, are the carbs the same or should I swap them too?

I would swap them. That's just me.

 

[rsting]

I would swap them. That's just me.

Yeah, that's what I'm thinking too.

 

[WKEND LUMBERJAK]

Yeah, that's what I'm thinking too.

It may not have to be retuned.

 

[T.Roller]

Put a tank and half thru the Makita today on a good size oak. Runs great with the muffler mod. Next I'm going to advance the timing a bit and see how it responds.

 

[rsting]

Well, I finished the 7910 last night and it's gone. Used the piston, cylinder and carb off the older style. Thing ran and cut awesome! He was happy and so am I.

 

[dahmer]

If this was already posted I apologize. Seemed very interesting to a collector.
https://m.ebay.com/itm/sachs-dolmar...&_sop=10&_nkw=dolmar+chainsaw&_from=R40&rt=nc

 

[ajschainsaws]

This looks ok whatta you’ll think

 

[T.Roller]

This looks ok whatta you’ll think

View attachment 135252

Looks like an old homelite

 

[Wilhelm]

This looks ok whatta you’ll think

View attachment 135252

She is trying to revert to her natural color, gotta respect the effort!

This is how mine looks like when she goes natural, but I generally don't mind her being a black top.


My tach crapped out, one can see it is off in the first picture which was taken after the second picture.
I have a replacement but I'll try salvage this one first, I am not really in the mood to make another tach/AF cover.

 

[ajschainsaws]

Looks like an old homelite

Yes it does I kinda like it this is how the dcs7300 is sold in Russia

 

[Wilhelm]

Yes it does I kinda like it this is how the dcs7300 is sold in Russia

Because they couldn't find the gray tops in the snow after setting them down and turning around!

 

[Philbert]

. . . this is how the dcs7300 is sold in Russia

Because they couldn't find the gray tops in the snow . . .

Maybe Russian hackers changed colors?

Phiblert

 

[ajschainsaws]

Maybe Russian hackers changed colors?

Phiblert

yeah OPE cyber attack watch out auto tune and m-tronic for the viruses

 

[ajschainsaws]

had the CT out today running a 44" hard nose breaking down this 4ft beech felled in three sections

 

[ajschainsaws]

and a couple of helpers for the smaller chunks

 

[Lee H]

The CT is a great saw. I enjoy running mine when I get the chance.

 

[ajschainsaws]

The CT is a great saw. I enjoy running mine when I get the chance.

Yeah Lee always enjoy running this saw some would say Iam mad maybe got a screw loose but I would sooner use the CT over the 166

I had a new 44” 404 full chisel skip chain on it and it was hard work getting the saw off 4-stroking even buried in full length , once I got down too the 3rd and last trunk I sharpened the saw and dropped the rakers what a difference
She pulled her weight down through without any hesitation

 

[Fishnuts2]

The CT is a great saw. I enjoy running mine when I get the chance.

Mine is fun too when I can get it to run. I've found a place to order a new carb, but it is on backorder from Tillotson. It loads up on slow speed but runs great under load. Seems to have as much power as my 166 though. Maybe it's the vibes!

 

[ajschainsaws]

Mine is fun too when I can get it to run. I've found a place to order a new carb, but it is on backorder from Tillotson. It loads up on slow speed but runs great under load. Seems to have as much power as my 166 though. Maybe it's the vibes!

They do seem too have the same power ,mine is the mk111 so it has antivibe
I shall get a video cutting a big log some day soon

 

[dahmer]

Any input on the 115i? Solid saw, parts available? Thanks.