The Official Craigslist & eBay Thread

[ranchdadmike]

https://pensacola.craigslist.org/tls/d/molino-stihl-200t-chainsaw/6787164834.html

 

[CrystalRiver1]

Hmm...pretty good size pallet of saws...

PrevNext
Marketplace
›
Garden
LAST ONE! PALLET OF CHAINSAWS, AS IS!!! NO IDEA WHAT THEY NEED. $150 OBO
Huntsville, AL · about an hour ago ·
$150




ONE PALLET OF CHAINSAWS, AS IS!!! NO IDEA WHAT THEY NEED. $150.00 OBO Just to clarify. these saws are saws that came into our shop this year for some kind of repair or trade in. in most cases they were checked out by the techs and an estimate has been given, the customer decides not to have it repaired, we then consume the deposit and scrap the saw ie. sell it here. sometimes a unit may come in with leaking fuel lines and the customer just wants to see if the fuel lines will be the fix. many times they opt out of the repair and leave the equipment. in some cases the unit was a trade on a new unit and at the shop rate we charge if it isn't a very simple repair we wont put anything in it and just sell as is, after a while this stuff accumulates and we need the space so we pile it on a pallet and sell it in bulk. We don't sell these brands so the parts are no good to us. Every time I have sold units like this, its always a super deal due to all the good parts that come with it. just the bars and chains are worth the cost of the pallet. Hope this helps! Less


Report
Seller Information

Darren B Browne
Joined Facebook in 2011

 

[Drptrch]

Gas & Tool can

https://offerup.co/6OuO9GyYdT

Erik

 

[usmcbuckwild]

If he doesn’t want it I’d pay someone $50 plus shipping to pick it up. Don’t care if you talk him down and keep more for yourself I’d pay $450 for it all day.


Sent from my iPhone using Tapatalk

I think both of us have sent him e-mails, still waiting on a response. I am more than happy to check out the saw and facilitate a purchase for someone.

 

[Dub11]

Hmm...pretty good size pallet of saws...

PrevNext
Marketplace
›
Garden
LAST ONE! PALLET OF CHAINSAWS, AS IS!!! NO IDEA WHAT THEY NEED. $150 OBO
Huntsville, AL · about an hour ago ·
$150




ONE PALLET OF CHAINSAWS, AS IS!!! NO IDEA WHAT THEY NEED. $150.00 OBO Just to clarify. these saws are saws that came into our shop this year for some kind of repair or trade in. in most cases they were checked out by the techs and an estimate has been given, the customer decides not to have it repaired, we then consume the deposit and scrap the saw ie. sell it here. sometimes a unit may come in with leaking fuel lines and the customer just wants to see if the fuel lines will be the fix. many times they opt out of the repair and leave the equipment. in some cases the unit was a trade on a new unit and at the shop rate we charge if it isn't a very simple repair we wont put anything in it and just sell as is, after a while this stuff accumulates and we need the space so we pile it on a pallet and sell it in bulk. We don't sell these brands so the parts are no good to us. Every time I have sold units like this, its always a super deal due to all the good parts that come with it. just the bars and chains are worth the cost of the pallet. Hope this helps! Less


Report
Seller Information

Darren B Browne
Joined Facebook in 2011

This one is the only one worth a *s-word.

I think both of us have sent him e-mails, still waiting on a response. I am more than happy to check out the saw and facilitate a purchase for someone.

That guy asked for help then is MIA?

 

[Frankavich84]

I think both of us have sent him e-mails, still waiting on a response. I am more than happy to check out the saw and facilitate a purchase for someone.

Well NCPT has dibs since he found it. But seriously if someone sets up time with the guy with the saw and can acquire it I’ll pay $450 to get it to my door. I’m not reaching out to the saw owner as that would just confuse the hell out of the guy.


Sent from my iPhone using Tapatalk

 

[NCPT]

Well NCPT has dibs since he found it. But seriously if someone sets up time with the guy with the saw and can acquire it I’ll pay $450 to get it to my door. I’m not reaching out to the saw owner as that would just confuse the hell out of the guy.


Sent from my iPhone using Tapatalk

Right on buddy. I sent the seller an email yesterday, still no response.

 

[ranchdadmike]

 

[Dub11]

Are you close to that?

 

[ranchdadmike]

Are you close to that?

Roughly two hours

 

[Dub11]

Roughly two hours

Meh not worth it then lol.

The PM 700 was the only one I'd grab. Well maybe the counter vide carcass too.

 

[ranchdadmike]

Meh not worth it then lol.

The PM 700 was the only one I'd grab. Well maybe the counter vide carcass too.

I think there’s a couple members who live closer

 

[Backtroller]

Poulan 8500 $425. 36”

 

[Drptrch]

Mac 1-85
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/323628791091



Erik

 

[kingOFgEEEks]

Not bad

 

[chipper1]

Not bad
View attachment 158136 View attachment 158142

Those little ones are good runners.

 

[NCPT]

The elusive left hand 372!

 

[chipper1]

The elusive left hand 372!
View attachment 158152

That would be sweet in a full wrap lol.

 

[CrystalRiver1]

chainsaw Husqvarna 385xp (85cc) 28" bar and chain - has new parts and - $260 (Stone Mountain

image 2 of 2>

condition: salvage
make / manufacturer: Husqvarna
model name / number: 385

Hi,
I have a chain saw Husqvarna 385xp (85cc) 28" bar and chain - has new parts and needs to be assembled. I had trouble starting the Husky and determined it needed a seal and crank bearing. Since the PSI was a bit low (120) I decided just to order new everything while I had it apart. The parts then took a while getting here and in the meantime I bought a new saw since I had a big oak that I really wanted down before Christmas.

I have for the saw:

a new cyl and piston

a new crankshaft

new crankshaft bearings

new crankshaft seals

new case seal

rebuild kit for the carb. (though it was fine)

Plus almost new parts I added the previous year such as clutch drum, etc. I kept everything in bags to keep the screws and bolts straight.

Just looking to clear up my unfinished projects and to get a bit of money for something else. Please, no crazy offers, I can assemble it myself and sell it on E-Bay for much more money like I did my 288, if I wanted to spend the time doing it instead of working on my current projects. I am basically selling the saw for $200 and $60 for the bar and chain. It is just if I put it together, I am going to port it and the muffler, and do other things while I have it apart. I rather just sell it since I bought a new one.

I have additional 28" chains (new and used) I would be willing to sell for a very agreeable price, bring some extra $5s, I think I have 3-4 extra.

If the listing is up, it is still available, so no need to ask.

Thank You for looking.
=============================
Please leave your phone # and name so we can arrange a pick up time. 1st contact is by email.

No phone number = no reply = it helps avoid SPAM.

Please bring exact cash money, I will not have change, nothing bigger then a $20.

Thank You
https://atlanta.craigslist.org/eat/tls/d/pine-lake-chainsaw-husqvarna-385xp-85cc/6784507373.html

 

[Frankavich84]

Right on buddy. I sent the seller an email yesterday, still no response.

Ever hear back from him?


Sent from my iPhone using Tapatalk