The Official Craigslist & eBay Thread

[chipper1]

Poulan 361 in there? Also, is that a Tim Allen Poulan I see. And lastly, nice little Green Top Handle.....

That's all for now.

There's a 400, yes, That Tim Allen might already be taken, yep a 25.
When I saw the Tim Allen I laughed as I had talked with someone else about one not long ago.

The advertising for it must have been done by the Mac 10 10 guy.

 

[Jon1212]

There's a 400, yes, That Tim Allen might already be taken, yep a 25.
When I saw the Tim Allen I laughed as I had talked with someone else about one not long ago.
View attachment 116064
The advertising for it must have been done by the Mac 10 10 guy.
View attachment 116065

That's a nice haul....

 

[chipper1]

That's a nice haul....

Thanks Jon.
There's a bunch of bars buried in there too, but I haven't even looked through them, just loaded it all up and left.

 

[Jon1212]

Thanks Jon.
There's a bunch of bars buried in there too, but I haven't even looked through them, just loaded it all up and left.

Let me know what you find...

 

[p61 western]

Thanks Jon.
There's a bunch of bars buried in there too, but I haven't even looked through them, just loaded it all up and left.

Were all those saw cases empty?

 

[chipper1]

Were all those saw cases empty?

Nope, I'll look through them tomorrow and see what's in those, theres a wild thing in one though LOL.

Let me know what you find...

Pretty sure they are for all these guys that don't have bars on them. I looked quickly, but nothing initially stood out.
There was a low hr 3/8x20 Oregon on the dolmar 5100s. I swear he said it had a scored piston, but it feels pretty tight, may be really scored .
There's the 400, and the 357. The 357 has an Italian cylinder on it and feels low on compression, but so did the 400, then I realized it didn't have a plug in it .

 

[Jon1212]

Nope, I'll look through them tomorrow and see what's in those, theres a wild thing in one though LOL.

Pretty sure they are for all these guys that don't have bars on them. I looked quickly, but nothing initially stood out.
There was a low hr 3/8x20 Oregon on the dolmar 5100s. I swear he said it had a scored piston, but it feels pretty tight, may be really scored .
There's the 400, and the 357. The 357 has an Italian cylinder on it and feels low on compression, but so did the 400, then I realized it didn't have a plug in it .
View attachment 116075

That 400 looks pretty decent....quite the torque machines.

If you find any oddball bars, or Windsor made bars....

 

[chipper1]

That 400 looks pretty decent....quite the torque machines.

If you find any oddball bars, or Windsor made bars....

What can you tell me about the 400, I'm having a hard time pulling up anything on it, and that's not normal with my browsing history, usually I find what I want very fast and all I'm getting is the 400e and electric saw .
I'll keep an eye out.
I have a small mount Windsor that's like 64dlx3/8 I like to run on my small huskys, fun little bar on a 555.
Here it is on a 254, @ranchdadmike .

 

[Jon1212]

What can you tell me about the 400, I'm having a hard time pulling up anything on it, and that's not normal with my browsing history, usually I find what I want very fast and all I'm getting is the 400e and electric saw .
I'll keep an eye out.
I have a small mount Windsor that's like 64dlx3/8 I like to run on my small huskys, fun little bar on a 555.
Here it is on a 254, @ranchdadmike .

Pretty short production run, mid 60's.... 4.0 cubes.

 

[chipper1]

Pretty short production run, mid 60's.... 4.0 cubes.

Looks like they were the same/very similar to the 401 from what I can find, and that's about it.
I wasn't able to find out much about the 401 either and modified mark says they are rare, so there's a good chance they are.

 

[Jon1212]

Looks like they were the same/very similar to the 401 from what I can find, and that's about it.
I wasn't able to find out much about the 401 either and modified mark says they are rare, so there's a good chance they are.

It looks like yours is a 400A if that says "Automatic" on the recoil. They were only made 1965-1967.

 

[chipper1]

It looks like yours is a 400A if that says "Automatic" on the recoil. They were only made 1965-1967.

That's the one.
It's a neat looking old saw, but it amazing how little info I found.

 

[ranchdadmike]

What can you tell me about the 400, I'm having a hard time pulling up anything on it, and that's not normal with my browsing history, usually I find what I want very fast and all I'm getting is the 400e and electric saw [emoji53].
I'll keep an eye out.
I have a small mount Windsor that's like 64dlx3/8 I like to run on my small huskys, fun little bar on a 555.
Here it is on a 254, @ranchdadmike .

I think I know that saw...and it now has a Sandvik speed tip of similar size. Thanks again for that saw Brett

 

[PA Dan]

Lots of good parts, but everything has problems, not runners in this pile.

That's cool, hopefully someone will want to buy it for parts.

If you guys see something you need/want let me know, most stuff will be shipping plus a small "packaging fee" .

I've never ran one before myself, but I've watched some videos and they look like they just keep plugging away at it, lots of low end grunt.
I have a buddy out in NY who may want them, he's always selling them.

Any 357's in there...?[emoji41]

 

[Wilhelm]

Nope, I'll look through them tomorrow and see what's in those, theres a wild thing in one though LOL.

Pretty sure they are for all these guys that don't have bars on them. I looked quickly, but nothing initially stood out.
There was a low hr 3/8x20 Oregon on the dolmar 5100s. I swear he said it had a scored piston, but it feels pretty tight, may be really scored .
There's the 400, and the 357. The 357 has an Italian cylinder on it and feels low on compression, but so did the 400, then I realized it didn't have a plug in it .
View attachment 116075

Finally something that I like!

I like that Dolmar PS-5100S with scabbard!

 

[chipper1]

Finally something that I like!

I like that Dolmar PS-5100S with scabbard!

I thought you've seen some of my others before.

I think I know that saw...and it now has a Sandvik speed tip of similar size. Thanks again for that saw Brett

figured you would.
That's a perfect size in 3/8 I think. I really liked that saw, one of the favorite I owned that yr, another one I really liked was the other 254xp lol.

Any 357's in there...?[emoji41]

Only one, it has an Italian cylinder on it. There was a hyway seal/gasket kit with it and it felt low on compression, but for all I know it didn't have a spark plug in it I'll have to look at the piston later.

 

[chipper1]

. The 357 has an Italian cylinder on it and feels low on compression, but so did the 400, then I realized it didn't have a plug in it .

I thought I said that before lol.

 

[Wilhelm]

Finally something that I like!

I like that Dolmar PS-5100S with scabbard!

I thought you've seen some of my others before.
...

I meant "finally something to my liking in that haul"!

 

[Frank bierce]

Likely a homie 1050A

 

[chipper1]

If you find any oddball bars

Found these, kinda cool looking, I like the max power, and who doesn't like farm tough.
I've been wanting to get a nice bar collection going, I've got a couple others already I like too.
The wild thing one is pretty cool, not sure what it says on them when new, but all that's left is "wild" on the one side.
I'll probably put the Mac bar on one of them, now I need one of the stainless bars to have on another.