The giveaway thread 20/21/22/23/24/25

[Woodslasher]

I guess I can use the Homie stuff. I can send a shipping label?

All that stuff is yours.

 

[Woodslasher]

Free bars! And a free 562 a/f and filter base. The chain on the fat bar is gone.

 

[davidwyby]

Pisto Ring that was supposed to fit the stupid husky 450 I’m fixing, wrong size, looks like 35mm? Dunno what for. Don’t want to look at it any more.

 

[Woodslasher]

Gone.

 

[Woodslasher]

I finally sorted through my gallons of chain and I found a bunch of ones I have no use for, so I’m offering them up for the cost of shipping.
There are a few rules, namely, if the chains are shown in a lot it’s all or nothing.
Second, I did the best I could with the dl count and gauge measurements, if they are wrong I’m sorry but I’m not taking the chains back so in other words, no guarantees/warranties.
Lastly, some chains are stiff, others aren’t, some are chisel, some are chipper, some are safety, some aren’t, if you’re disappointed with how they look in person go to the sensitive members thread to complain, don’t clutter up this thread. While this sounds callous, I’ve heard of people being angry their used chains weren’t new and exactly the gauge, pitch and dl count they wanted, so I want to forestall any similar episodes. Now, on to the chains! I should have a pic of the chains laid out next to a tape, (maybe) a close up showing tooth length, and a picture of one of them in a box with all the pertinent details on it. If there’s no brand written, it’s Oregon, if there is a brand written, that particular chain is from that brand.

 

[Woodslasher]

More: Both chains are .404 x 0.063, the worn shorter one has 5 or 6 busted teeth so if no one wants it within a week I’m scrapping it. (Gone)

 

[Woodslasher]

More: one unspun 3/8 x 0.058 and one lightly used 3/8 x 0.058. No idea on driver count, both need to be sized/joined, the ends are roughly at the end of the tape and they are sitting pretty straight (Gone). Also, if there is a ? after a number, it either means Oregon didn’t list a bar length for that dl count, I’m only 98% sure that’s the correct dl count, or neither the dl count or consequently the bar length showed up on Oregon’s chart.

 

[Maintenance Chief]

More: one unspun 3/8 x 0.058 and one lightly used 3/8 x 0.058. No idea on driver count, both need to be sized/joined, the ends are roughly at the end of the tape and they are sitting pretty straight. Also, if there is a ? after a number, it either means Oregon didn’t list a bar length for that dl count, I’m only 98% sure that’s the correct dl count, or neither the dl count or consequently the bar length showed up on Oregon’s chart.
View attachment 296512 View attachment 296513 View attachment 296514 View attachment 296515 View attachment 296516

I could use the unspun for an ancient mac bar with a weird dl.
Pm me price?

 

[Woodslasher]

More:

 

[Maintenance Chief]

The 3/8ths .058

 

[Woodslasher]

 

[Woodslasher]

Gimme a minute to finish my pic dump and refill the dog’s water and I’ll get back to with you a pm @Maintenance Chief . The last chain:

 

[Maintenance Chief]

sorry. Didn't want to be late to the party.

 

[Woodslasher]

Gone.

 

[JohnnyBlade]

More stuff, free plus shipping. If I should just scrap these lemme know. First up is a busted 064? 066? 3/4 wrap, I think it's off of an 066 flat top. Second is a usable 075 piston. It has a few minor marks, but the machining marks are still visible in some spots.
View attachment 296664 View attachment 296665 View attachment 296666 View attachment 296667 View attachment 296668

Gotta hear the story on the wrap handle

 

[Woodslasher]

Gotta hear the story on the wrap handle

You're gonna be disappointed. My brother got it from an ex-logger he was working for and gave it to me. "I don't know if it's worth anything, but you can have it." It looks like the bottom suffered from sliding-in-truck-bed-itis and one day it finally cracked in half.

 

[JohnnyBlade]

You're gonna be disappointed. My brother got it from an ex-logger he was working for and gave it to me. "I don't know if it's worth anything, but you can have it." It looks like the bottom suffered from sliding-in-truck-bed-itis and one day it finally cracked in half.

Id say its worth something to somebody. If someone knows how to weld Aluminum its a score in my book. But i dont need it thanks
Just looking for a good laugh
If that was for a 6 series jred or a 272 id be all over it

 

[davidwyby]

Might could use the 404 and 20” 3/8”

 

[Woodslasher]

Might could use the 404 and 20” 3/8”

If ya need them, they're yours.

 

[Woodslasher]

Id say its worth something to somebody. If someone knows how to weld Aluminum its a score in my book. But i dont need it thanks
Just looking for a good laugh
If that was for a 6 series jred or a 272 id be all over it

I'm waiting to hear back from a guy, gimme a couple of days and if he doesn't get back to me I'll have a 272 wrap for you.