stihl 066 porting

[jmssaws]

Have him send it to me frank and I'll shove some chips in its vagina

 

[Frank bierce]

Lol!! Chip it up!!

 

[jmssaws]

I'll cram it full, I need to build another one to see if I can beat your saw I just finished.

 

[Keith Gandy]

Are the 066 cylimders that fit an 064 drop on? Is there a difference in 066 cylinders that were flat tops and the later round top?

 

[psuiewalsh]

Nope. Holes need modded in cylinder to fit 064

Sent from my C771 using Tapatalk 2

 

[psuiewalsh]

Many of the flat 066 are no decomp

Sent from my C771 using Tapatalk 2

 

[jmssaws]

It don't take much to get a 66 cylinder on a 064, my 064 has 066 cases, had two cylinder bolt that were stripped so I just changed cases.

066 cylinder likes the 064 case.

 

[Canadian farm boy]

Any advantages to putting the 066 top end on the 064 cases? Kinda like a 044 hybrid or???

 

[junkman]

I have a couple sets of old flat top cases i think ,not sure if 64 or 66 though

 

[jmssaws]

I wouldn't spend any extra on a no decomp cylinder, I haven't seen one with great numbers. There's no two alike and the exhaust is to high and the intake is to low on all of them. The transfer height is all I'm worried about so I can keep the opening as small as I can.

 

[jmssaws]

I have a couple sets of old flat top cases i think ,not sure if 64 or 66 though

066's don't have a line on the oiler

 

[junkman]

Rh 066 lh 064 ?

 

[Tractorsaw1]

Jason do tell about the races? Oh & @junkman if the 066 still needs a home, drop me a line!

PM sent

 

[psuiewalsh]

Rh 066 lh 064 ?View attachment 4032 View attachment 4033 View attachment 4034 View attachment 4036

Yes if there is the outlet for an oil pump into the case it is 066. The 064 has an oil hose like 044 going to the bar pad

 

[huskihl]

Too many Kevins lol

 

[jmssaws]

Jason do tell about the races? Oh & @junkman if the 066 still needs a home, drop me a line!

PM sent

I'm always ready for a race,when and where? I got some wood.

 

[mdavlee]

Dang junkman you been holding out on us.

 

[Moparmyway]

300 and 25 shipping ,i have a another handlebar ,but the rh side was cut off for some reason ,will need a sprocket cover and handlebar to make a useable saw ,think it was cut off for milling on another saw it was on .it has been collecting dust in my shop for 6 months ,i just have no real use for it

So does it come with the good handlebar ?

Got better pics of the bad area ?

I am VERY interested

 

[junkman]

Dang junkman you been holding out on us.

Guy owed me money so he gave me a saw ,i am one of the few that like the newer chassis i guess ,i will keep my 660 ,let the old ones go

 

[junkman]

So does it come with the good handlebar ?

Got better pics of the bad area ?

I am VERY interested

That handlebar is for my 660 ,does not go with the saw ,same with sprocket cover ,i have a 3/4 wrap someone cut the wrap off and made into a 1/2 for milling i think can include ,i do not have a sprocket cover for this saw though .