HELP! Stihl 056 Magnum piston measurements

[Shane¹]

Anyone have a Stihl 056 Magnum piston kicking around they could give me a few quick measurements off?

 

[Junk Meister]

What kind of measurements? I I have digital verniers I trust. I have a new Old stock piston.

 

[Shane¹]

I would like to know pin to crown, the width of the skirts and total length

 

[jacob j.]

I would like to know pin to crown, the width of the skirts and total length

The one I have here looks like just a hair under 16mm from the top of the pin bore to the edge of the crown (23.5mm from center of pin bore to crown edge), 42mm from the edge of the crown to the bottom of the skirt, around 3mm crown rise on the dome, 37mm across the bottom of the skirt with a straight ruler, 41mm or so skirt width when using a piece of paper.

 

[Shane¹]

The one I have here looks like just a hair under 16mm from the top of the pin bore to the edge of the crown (23.5mm from center of pin bore to crown edge), 42mm from the edge of the crown to the bottom of the skirt, around 3mm crown rise on the dome, 37mm across the bottom of the skirt with a straight ruler, 41mm or so skirt width when using a piece of paper.

Thank you sir!

 

[Shane¹]

Got any ideas on a piston with a wider skirt that is 56mm?

 

[jacob j.]

Do you need a certain pin size? The Meteor 395 piston has pretty wide skirts. There's also the Partner K-1200 piston but it uses a 12mm pin.

 

[Shane¹]

I would prefer 12mm pin. I was looking at the k-1200 piston. You don't happen to have one of those do you?

 

[jacob j.]

I have one but it's in storage. I may be able to dig it out tomorrow.

 

[Shane¹]

I have one but it's in storage. I may be able to dig it out tomorrow.

Don't worry about it JJ mark is sending one this way if it doesn't work I guess I have another piston for something

 

[Junk Meister]

The one I have here looks like just a hair under 16mm from the top of the pin bore to the edge of the crown (23.5mm from center of pin bore to crown edge), 42mm from the edge of the crown to the bottom of the skirt, around 3mm crown rise on the dome, 37mm across the bottom of the skirt with a straight ruler, 41mm or so skirt width when using a piece of paper.

Glad I got distracted, You saved me from having to dig mine out of the box on the top shelf..