stihl 028 super

[T.Roller]

024 actually

 

[P.M.P.]

Some people ain't happy unless they are stirring the chit. As long as we have people, chit will be stirred.

The interwebz are a most serious thing you know. So serious chit stirring will be happening until Al Gore dies and the Internet goes into the earth with his corpse.

Seriously.

And stuff.

Gotcha So this is a true statement then

 

[jake wells]

Gotcha So this is a true statement then

i stir the chit every time i make a thread.

 

[Wood Doctor]

They replaced the 028 with the 026

Or the 024 -- in other words they downsized. Then they dropped the 034 and brought out the MS361. To me, that left a gap in the professional line.

Enter my Husky 353 (or the 346XP) that filled it, and Stihl hardly reaches that with the more expensive MS261. So, the beat goes on. Heck, guys, we could write a book on this evolution.

 

[T.Roller]

Or the 024 -- in other words they downsized. Then they dropped the 034 and brought out the MS361. To me, that left a gap in the professional line.

Enter my Husky 353 (or the 346XP) that filled it, and Stihl hardly reaches that with the more expensive MS261. So, the beat goes on. Heck, guys, we could write a book on this evolution.

034 was replaced with the 036. Also I said the other day the 024. Look at the post below where I said 026

 

[Adirondackstihl]

034 was replaced with the 036. Also I said the other day the 024. Look at the post below where I said 026

No
034S was

 

[Wood Doctor]

No
034S was

That's what I thought, but both were canned. The 036 by the MS361. So, the gap between the MS261 and the newer MS362 remains. I truly believe Husky saw that and filled it with the 353 and then the 346XP, both of which sold well.

Anyway, I still like my two remaining 028 Supers and have sold three of them that I used to own. Most of the time, they cut very well and I would never trade either for an MS291.

 

[Chainsaw Jim]

They replaced the 028 with the 026

They replaced the 028 with the ms280.

 

[T.Roller]

No
034S was

Obviously, didn't know we were being so picky, it's still a 034. Didn't realize we needed to cover all the models under that number. I'll do better next time

 

[T.Roller]

They replaced the 028 with the ms280.

That came years and years after as a sells gimmick

 

[T.Roller]

That's what I thought, but both were canned. The 036 by the MS361. So, the gap between the MS261 and the newer MS362 remains. I truly believe Husky saw that and filled it with the 353 and then the 346XP, both of which sold well.

Anyway, I still like my two remaining 028 Supers and have sold three of them that I used to own. Most of the time, they cut very well and I would never trade either for an MS291.

I don't blame you. I wouldn't trade a mag saw for a clam shell

 

[Deets066]

Obviously, didn't know we were being so picky, it's still a 034. Didn't realize we needed to cover all the models under that number. I'll do better next tim

Who's Tim?

 

[tree monkey]

mike

 

[T.Roller]

Who's Tim?

Fixed jackass

 

[Deets066]

Fixed jackass