Solo 665 thread

[Deets066]

JB weld sticks to aluminum much better when it's roughed up and clean

 

[Red97]

View attachment 53100


JB weld sticks to aluminum much better when it's roughed up and clean

Who needs case volume anyway...

 

[Deets066]

Heard these things fall apart, figured I better start gluing it together!

 

[concretegrazer]

Ain't broke mine. Yet....

 

[drf256]

What's up with the difference in depth from side to side Deets?

We're the transfer heights symmetrical from the factory?

 

[Deets066]

What's up with the difference in depth from side to side Deets?

We're the transfer heights symmetrical from the factory?

Difference in depth on the case?

 

[Deets066]

Case has a small hump on the pto side for clutch clearance

 

[drf256]

It may be an illusion Deets. The feeder area on the left looks deeper than the area on the right.

 

[Deets066]

It may be an illusion Deets. The feeder area on the left looks deeper than the area on the right.

No you are correct Al, there is a raised area on the right side for clutch clearance

 

[Chris Zautner]

When we have engines built for our drag bikes the cranks get shipped right to Falicon to get true and welded. If not well.. they start to come apart.....

 

[Deets066]

When we have engines built for our drag bikes the cranks get shipped right to Falicon to get true and welded. If not well.. they start to come apart.....

What's the goin rate on somthin like that

 

[Chris Zautner]

Not sure, I haven't had to have an engine built in a while luckly. But you can spend 5k on a good crank for a drag bike.

 

[blsnelling]

Falicon dues beautiful work. I forget the exact cost, but I think it was less than $150. I heard the horror stories and did it for insurance.

 

[Deets066]

Falicon dues beautiful work. I forget the exact cost, but I think it was less than $150. I heard the horror stories and did it for insurance.

Remember what turnaround time was roughly?

 

[blsnelling]

I do not, but it wasn't long.

 

[Deets066]

 

[Red97]

Might as well have em destroke it so you can stay 4 cube legal

 

[Deets066]

Might as well have em destroke it so you can stay 4 cube legal

Shhhh.

 

[Red97]

Shhhh.

Be cheaper to buy a 6400 if you were going to go that route..

 

[concretegrazer]

Anyone hear of crank problems in the 665/75? I thought it was just an issue with the 681's.