So what did you buy today

[jblnut]

Eh? I am betting you have "bling" on Big John...

If bling is considered anything that didn’t come factory then yeah. I put more dollars in AMS equipment on it than I paid for my first house. It’s chipped to 500hp, I stuck an Active Seat out of a Deere 8330 in it last fall, all LED lights, fresh paint on all eight rims/wheel weights and slab weights, and to top it off it has a snazzy new Alpine head unit so I can hook my cellar device to it. Big John is pimped out

I thought for about 7 seconds about putting carpet on the floor but my better sense got the best of me.

 

[Bill G]

 

[Bill G]

No "bling" picking corn here either..................

 

[Bill G]

I did get me one those fancy flipper phones though.......................

 

[Partner]

Have you seen those with a gearbox on the engine?

 

[TheDarkLordChinChin]

It is the light x bar is got. Not the light 06.

How's that for ugly?




I bought two square ground oregano chains from the uk. Paid a fortune in postage and customs. But I wanted to try a factory square ground chain as the round ground chains I've converted with a double bevel files didn't perform very well.

Almost all the cutters on this factory square ground chain have side beak. It cuts like a dull round filed chain.





This one's not as bad but its still there





Another bad one.





You get the picture.





I had heard factory chains were hit or miss and not on par with hand square filed or home square ground but I didn't think it was this bad.
Im not impressed.

 

[Outback]

I'm embarrassed to say I think that bar doesn't look that bad on the husky.

 

[Seachaser]

It is the light x bar is got. Not the light 06.

How's that for ugly?

View attachment 481841


I bought two square ground oregano chains from the uk. Paid a fortune in postage and customs. But I wanted to try a factory square ground chain as the round ground chains I've converted with a double bevel files didn't perform very well.

Almost all the cutters on this factory square ground chain have side beak. It cuts like a dull round filed chain.


View attachment 481842


This one's not as bad but its still there


View attachment 481843


Another bad one.


View attachment 481844


You get the picture.


View attachment 481845


I had heard factory chains were hit or miss and not on par with hand square filed or home square ground but I didn't think it was this bad.
Im not impressed.

@TheDarkLordChinChin
How far up did you have to ream out the bar to fit the Husqvarna?
In the process of doing that now.

 

[TheDarkLordChinChin]

@TheDarkLordChinChin
How far up did you have to ream out the bar to fit the Husqvarna?
In the process of doing that now.

1-1.5 inches. I used a metal grinding disk and cut it back a good two inches.
You will have to enlarge the tensioning holes on your bar too.

 

[Shane¹]

346 and 350 part saws...

 

[Junk Meister]

346 and 350 part saws...

View attachment 481922

I Count 7 Tank handles (1 Is debatable in the center box lower leftish).
A LOT of Orange there Ya need u get the Lords' Guide bar color scheme going. I am not a fan of the "GOTHIC" accents to break it up.

 

[Junk Meister]

1-1.5 inches. I used a metal grinding disk and cut it back a good two inches.
You will have to enlarge the tensioning holes on your bar too.

OILER port was OK as is? I have a friend that needs to incorporate some Iron/Stihl into his daily routine. (Entertainment Value so HUMOR ME please)

 

[Seachaser]

1-1.5 inches. I used a metal grinding disk and cut it back a good two inches.
You will have to enlarge the tensioning holes on your bar too.

 

[Shane¹]

I Count 7 Tank handles (1 Is debatable in the center box lower leftish).
A LOT of Orange there Ya need u get the Lords' Guide bar color scheme going. I am not a fan of the "GOTHIC" accents to break it up.

There is 14 cases haven't gotten a chance to look over it yet

 

[Junk Meister]

At a "NIKEL BUCK NINETY EIGHT" You got some nice EYE CANDY.

 

[TheDarkLordChinChin]

OILER port was OK as is? I have a friend that needs to incorporate some Iron/Stihl into his daily routine. (Entertainment Value so HUMOR ME please)

Haven't used the 372 with the stihl bar yet but my 562 and 394 both oil fine with stihl bars

 

[Yukon Stihl]

Didn’t wake planning to buy a truck
The other bidder woke up hoping to buy a truck.
I now have a Hiab for heavy lifting