So what did you buy today

[MR_T]

?Jonsered? equivalent to what? a 2188? and a 2175?
Are you going to show a bit more? One PIC is just a TEASE.

 

[Junk Meister]

veery NICE. I THANK YOU.
Has the 9000 had Gas/Mix in it . Looks to clean to have cut any wood.

 

[MR_T]

Not familiar with the 7100. Is that a 372 or 365?

Here you go. It's the same saw. 2172 vs 7100... Just paying the premium for the J name..

 

[MR_T]

veery NICE. I THANK YOU.
Has the 9000 had Gas/Mix in it . Looks to clean to have cut any wood.

Bought it from a collector. It had gas for sure since the old husky dealer set it up. didn't check for oil. didn't care. Never seen wood. That's for sure. Made sure it fired today and it did. might keep it. Might flip it. Not sure yet. Money talks.

 

[Junk Meister]

Bought it from a collector. It had gas for sure since the old husky dealer set it up. didn't check for oil. didn't care. Never seen wood. That's for sure. Made sure it fired today and it did. might keep it. Might flip it. Not sure yet. Money talks.

My Money screams and runs away.

 

[MR_T]

My Money screams and runs away.

I wasn't planning on buying another red 390xp.. I have a CS2188 I'm slowly restoring. I just couldn't pass this one up.

 

[Junk Meister]

I wasn't planning on buying another red 390xp.. I have a CS2188 I'm slowly restoring. I just couldn't pass this one up.

I don't blame you ..

 

[EFSM]

And the 9000 ?
You Posted whilst I was replying. I have a couple of REDMAX saws and there isn't much info on them . Need to dig them out and verify what size they are 5000 or 5500 and one other.

Some of the old 5000’s were actual Zenoah built machines but I think the newer ones were more like a 550. If it has a typical Husqvarna style tip cover it’s newer and if it has a knob holding the air filter cover on it is an old one.

 

[Junk Meister]

Some of the old 5000’s were actual Zenoah built machines but I think the newer ones were more like a 550. If it has a typical Husqvarna style tip cover it’s newer and if it has a knob holding the air filter cover on it is an old one.

Thank You I Will Check.

 

[davidwyby]

Hooray page 288!

I have a @Stump Shot ported 2188 I’m quite fond of, it’s speedy.

Today :

Joined the modern era. Couple 562s. Autotune and stock, quiet. Mostly for loaners.

 

[Sloughfoot]

I envy you

 

[Czed]

Reat 0538

I have a variety of knives from 40+ year's of buying stuff
This little edc knife 3.5" blade is one of my favorites I bought 2 more as christmas gifts
Inexpensive knife but it impressed me with the quality and sheath

Amazon.com : REAT EDC Fixed Blade Knife with Kydex Sheath, 8" D2 Steel Blade with Full Tang Design,Ergonomic G10 Handle, Hunting Knife for Camping,Survival,Outdoor : Sports & Outdoors

Amazon.com : REAT EDC Fixed Blade Knife with Kydex Sheath, 8" D2 Steel Blade with Full Tang Design,Ergonomic G10 Handle, Hunting Knife for Camping,Survival,Outdoor : Sports & Outdoors

www.amazon.com

 

[pavel408]

And the 9000 ?
You Posted whilst I was replying. I have a couple of REDMAX saws and there isn't much info on them . Need to dig them out and verify what size they are 5000 or 5500 and one other.

afaik (feel free to correct or add to the list):
RedMax G5300 = Jonsered 2152 ~ Husqvarna 353
RedMax G9000 = Jonsered 2188 ~ Husqvarna 390xp
RedMax GZ500 = Jonsered 2245 ~ Husqvarna 445 II
RedMax GZ550 = Jonsered 2255 ~ Husqvarna 455 Rancher
RedMax GZ5000 = Jonsered 2252 ~ Husqvarna 545
RedMax GZ7100 = Jonsered 2172 ~ Husqvarna 372xp XT
RedMax GZ4350 = Husqvarna 543xp

 

[Junk Meister]

afaik (feel free to correct or add to the list):
RedMax G5300 = Jonsered 2152 ~ Husqvarna 353
RedMax G9000 = Jonsered 2188 ~ Husqvarna 390xp
RedMax GZ500 = Jonsered 2245 ~ Husqvarna 445 II
RedMax GZ550 = Jonsered 2255 ~ Husqvarna 455 Rancher
RedMax GZ5000 = Jonsered 2252 ~ Husqvarna 545
RedMax GZ7100 = Jonsered 2172 ~ Husqvarna 372xp XT
RedMax GZ4350 = Husqvarna 543xp

First time I have seen This Thank You