So what did you buy today

[Partner]

The Stihl line has fake dimensions Take 2.7mm, you can use a caliper to measure 2.35mm, it's a size smaller and it's the same with every color

 

[SimonHS]

The Stihl line has fake dimensions Take 2.7mm, you can use a caliper to measure 2.35mm, it's a size smaller and it's the same with every color

Is it like a TV screen - measured on the diagonal?

 

[Partner]

Is it like a TV screen - measured on the diagonal?

View attachment 473596

Yes, but with other manufacturers the measurement agrees with the caliper

 

[oddsaws]

Really liking my pickup this evening

 

[jacktheripper]

Delivered two cords of firewood to a guy today. He traded me this 2159 in unknown condition for $40 off the price.

 

[singinwoodwackr]

Delivered two cords of firewood to a guy today. He traded me this 2159 in unknown condition for $40 off the price.


View attachment 473681

Like you needed another project saw…

 

[jacktheripper]

Like you needed another project saw…

That’s fair… lol. I have a 365 special that needs to be fully rebuilt with new crank and bearings, my 266 needs bearings, and now this one…

 

[jacktheripper]

So… when I get this 2159 sorted out and confirmed running good, anyone want to trade me port work or a 262xp for it?

 

[singinwoodwackr]

So… when I get this 2159 sorted out and confirmed running good, anyone want to trade me port work or a 262xp for it?

So, has to be someone on the coast or on a big lake?

 

[SawAddictedFarmer]

So… when I get this 2159 sorted out and confirmed running good, anyone want to trade me port work or a 262xp for it?

Sure, I've got a couple of angle grinders. Sounds like a fair deal.

 

[furb]

Wife is out of state so I don’t have to hear about buying a new chipper when’s there’s already two here.

 

[jacktheripper]

The 2159 LIVES!! The coil was wack. Threw a new one on. Then it wasn’t responding to carb adjustment. Well it helps to have the impulse line connected. Did that and we’re good to go. Sticker is still on the bottom, barely

 

[jacktheripper]

Just did a muffler mod, and it took 6 seconds off the cut time!

 

[drumbum]

Picked up a DBX 3bx series two for a ten spot and a 50's Singer 4 drawer table/cabinet for 20.

edit: and 47 1oz smilin bill jig heads will be here tomorrow.....

 

[justoldsaws]

Scored this 066 redlight a few days ago.
Starts, runs great and piston and cylinder are mint.

 

[Jusgunn3]

Just did a muffler mod, and it took 6 seconds off the cut time!

View attachment 473775

Seems to really like that muffler mod!

 

[jacktheripper]

Seems to really like that muffler mod!

Yeah, it just didn’t want to bog after that! And it will run a lot cooler bypassing that cat.

 

[SimonHS]

A tiny hearth brush and dustpan. It's really handy for cleaning up fire ash spills. Steel and wood so hot embers won't melt it. A magnet holds the brush to the dustpan.

 

[furb]

Probably overpriced but there’s nothing else cheap unless you want a rotted out rtv for $3500 that was run into the ground or $4000 for a gator that had the frame patched back together. I gave $3300 for this. Old farmer had it and traded it in on an enclosed cap ranger. The custom running boards are coming off. Winter is coming and there hasn’t been anything worthwhile come up for sale. I’m still waiting for the green light to get my two pro gators.

 

[pbillyi69]

Probably overpriced but there’s nothing else cheap unless you want a rotted out rtv for $3500 that was run into the ground or $4000 for a gator that had the frame patched back together. I gave $3300 for this. Old farmer had it and traded it in on an enclosed cap ranger. The custom running boards are coming off. Winter is coming and there hasn’t been anything worthwhile come up for sale. I’m still waiting for the green light to get my two pro gators.
View attachment 474090

is it gas or diesel