So what did you buy today

[Philbert]

2, 5-pound splitting wedges. Look new? $6 for the pair.

Also, a 3 hp, Toro snowthrower, with Tecumseh 2-stroke. Free. Needs a pull cord? (Low risk)

Philbert

 

[Partner]

This is something for me

 

[SimonHS]

You can never have too many screnches. I paid around £0.50 / 65 cents each for these. The bottom four have Phillips screwdriver ends. Less useful. I can't think of a chainsaw I own that has Phillips screws. They must be for weed whackers?



Then these spark plug wrenches and box wrenches were in the lot.

 

[Partner]

You can never have too many screnches. I paid around £0.50 / 65 cents each for these. The bottom four have Phillips screwdriver ends. Less useful. I can't think of a chainsaw I own that has Phillips screws. They must be for weed whackers?

View attachment 455762View attachment 455763

Then these spark plug wrenches and box wrenches were in the lot.

View attachment 455764

+ I know the screwdriver from Chinese chain tensioners in chainsaws

 

[Philbert]

The bottom four have Phillips screwdriver ends. Less useful. I can't think of a chainsaw I own that has Phillips screws. They must be for weed whackers?

Probably string trimmers. I’ve seen some with T-27 Torx on the end. Some 2- piece ones (like a plumbing faucet wrench), Some folding ones (see link, below).

I guess you could flatten out the ends of the Phillips ones, if you were bored!

P

Thread 'New, Flat Scrench'

Dec 21, 2016

The scrench is probably the most widely recognized chainsaw tool. It is probably also the most frequently lost. While we could carry a separate wrench and screwdriver, few do. And if you look in catalogs, you will find dozens of variations of the classic 'T' style scrench, which is simple to use, but hard to fit in a pocket.

So I was interested in this flat, folding design offered by OTT (www.3ott.com). It consists of a machined aluminum handle, with a folding screwdriver, and a pivoting socket (13mm and 19mm) that fits the bar nuts on many saws.



The tool comes in...

• Philbert
• Replies: 72
• Forum: Chainsaws

• 

Philbert

 

[furb]

I got done early and took a walk around the junkyard. My “cheap” 312k element needs some stuff but parts are expensive and scarce for 09-11. Had I realized that before I would have probably parted this out. Anyway two years ago I pulled parts off this car at the yard and somehow the carcass was still there. It doesn’t look like much but it’s a good find. There were only 14k of the 09-11 made. There’s a bunch of small odd and ends not pictured.

 

[Partner]

A friend brought a Chinese chainsaw and says he wants $5 for a beer even the cylinder didn't get dirty. 2 shock absorbers and fuel lines are torn, the piston is also damaged after some changes, and yet the chainsaw starts even though it loses fuel

 

[whitesnake]

I got done early and took a walk around the junkyard. My “cheap” 312k element needs some stuff but parts are expensive and scarce for 09-11. Had I realized that before I would have probably parted this out. Anyway two years ago I pulled parts off this car at the yard and somehow the carcass was still there. It doesn’t look like much but it’s a good find. There were only 14k of the 09-11 made. There’s a bunch of small odd and ends not pictured.
View attachment 455832

Good score. They have a cult like following. Nice clean examples still bring good money.

 

[whitesnake]

I bought a coffee today. Tasted like ass. I think I got the old “let’s combine all the mostly empty pots together to make a full one and brew some more.” Sometimes it pays to wait for the fresh pot to finish brewing.

 

[Partner]

I need good glue $5

 

[Partner]

A few things for $20 The knife looks like someone was crushing stones with it

 

[LAWN BOY]

I think I'll love this. Probably getting another one for my ATV after I put this one on my lawn tractor. Then I'll get another for my grandma for her cub cadet xt1.

 

[Partner]

I need good glue $5

The spare part costs £25 or the entire device costs £50

 

[Jake Dykstra]

Found this like new 2101xp today. Didn't take much cleaning and she shined right up.

 

[Partner]

I need good glue $5

I will try to weld it, but I need to insert an additional tube inside because it is 0.7 mm thin

 

[hacskaroly]

Found this like new 2101xp today. Didn't take much cleaning and she shined right up.

Shoot, that one is in really nice condition!

 

[Partner]

A friend brought a Chinese chainsaw and says he wants $5 for a beer even the cylinder didn't get dirty. 2 shock absorbers and fuel lines are torn, the piston is also damaged after some changes, and yet the chainsaw starts even though it loses fuel

The rubber cable is very thin and it is obvious what quality it is it will be replaced with a thicker tygon

 

[furb]

I got done early and took a walk around the junkyard. My “cheap” 312k element needs some stuff but parts are expensive and scarce for 09-11. Had I realized that before I would have probably parted this out. Anyway two years ago I pulled parts off this car at the yard and somehow the carcass was still there. It doesn’t look like much but it’s a good find. There were only 14k of the 09-11 made. There’s a bunch of small odd and ends not pictured.
View attachment 455832

Good score. They have a cult like following. Nice clean examples still bring good money.

I drive my crv normally if I don’t need the truck. Both elements are noisy, rattling tin cans especially with the seats up but they do have their purpose. I bought a wrecked 03 to keep the crv and both elements going. I need to get the 11 squared away. The crv doesn’t have ac so it doesn’t see much use in the summer.

 

[old 040]

I picked this up a week ago today. I bought one new back in '02, my son outgrew it quickly, so I traded that one in on an '06 CRF 100f.
I liked the little 70 I bought new back in '02 and decided it was time to try to find another, after a few ghostings on Marketplace, and driving a rather long distance only to be disappointed, I was about to give up. I finally lucked into the one shown. Today, if the weather allows, I'll be grabbing a '02 Yamaha TTR 90 that looks to be a low hour bike, these little bikes are a lot of fun.....

 

[RCBS]

I picked this up a week ago today. I bought one new back in '02, my son outgrew it quickly, so I traded that one in on an '06 CRF 100f.
I liked the little 70 I bought new back in '02 and decided it was time to try to find another, after a few ghostings on Marketplace, and driving a rather long distance only to be disappointed, I was about to give up. I finally lucked into the one shown. Today, if the weather allows, I'll be grabbing a '02 Yamaha TTR 90 that looks to be a low hour bike, these little bikes are a lot of fun..... View attachment 456171

Had one of the funnest riding days I've had in decades a couple years ago following my 6'6" buddy around the APV area on his CRF110. I have not laughed like that since. It was a mud day and we were all struggling, but seeing my friend monkeying around on that little bike was priceless. It took me back to my days as a kid and reminded me why I like riding so much.