Saw video thread

[tree monkey]

must of used them husky magnums. Ted done told ya they were leaky

and the screw fell out

 

[Wolverine]

where are the 346 36" bar vids?

Not to say it can’t, if I’m chewing on a 30” stick I have no plans to sit there and wait on a 50cc saw. You still guys have all the time in the world cuz you’re used to slow saws. My niney fo be tearin that *s-word up mucho grande to some 3 cube boy toy.
Team Husky pick the right tool for the job. #wining

 

[drf256]

Ya think I’d cut a 36” log with a 49cc saw all day?

Simply illustrates its possible, the vid was made at the request of the new owner who specifically wanted to see it pull a 36.

I generally cut wood with an appropriate sized saw. The logs on the pile will be handled with a MMWS 066 and a Riff Raff Redfin 288.

 

[Wolverine]

I's just funnin' Doc. No disrespect meant.

 

[paragonbuilder]

Ya think I’d cut a 36” log with a 49cc saw all day?

Yes

 

[drf256]

I's just funnin' Doc. No disrespect meant.

None taken. Sorry if it came off that way my friend.

 

[drf256]

Yes

Maybe half a day.

 

[sawmikaze]

Just finished this one; 2172 with oe big bore and 390 boot. Good for work or just showing off, runs real good.

Very nice !

 

[MustangMike]

I just figured you were doing it:

1) To show that it could, and

2) To put some break in time on the saw. What better way to do that???

 

[Onan18]

Ya think I’d cut a 36” log with a 49cc saw all day?

Simply illustrates its possible, the vid was made at the request of the new owner who specifically wanted to see it pull a 36.

I generally cut wood with an appropriate sized saw. The logs on the pile will be handled with a MMWS 066 and a Riff Raff Redfin 288.

That's what I am talking about, HOORAY 288!!!!!!!!

 

[huskyboy]

Ya think I’d cut a 36” log with a 49cc saw all day?

Simply illustrates its possible, the vid was made at the request of the new owner who specifically wanted to see it pull a 36.

I generally cut wood with an appropriate sized saw. The logs on the pile will be handled with a MMWS 066 and a Riff Raff Redfin 288.

Uh oh. Team stihl has a possible traitor???

 

[Onan18]

Uh oh. Team stihl has a possible traitor???

I have intel from a very reliable source that the good doctor not only has a @Redfin 288, but a bad azz @Moparmyway 395.

 

[huskyboy]

Wow secretly betraying team schteel and hiding whooskies under the bench.

 

[SawSeeker]

28” Full comp 8 pin

That's a bad broad right there!

 

[MustangMike]

Calm down, I think everyone knows Al has worked with saws from both makers for quite a while.

My Nephew loves the 262 he did for him.

The only difference is, the only Husky's he owns .... WERE GIVEN TO HIM!!!!!

 

[huskyboy]

Calm down, I think everyone knows Al has worked with saws from both makers for quite a while.

My Nephew loves the 262 he did for him.

The only difference is, the only Husky's he owns .... WERE GIVEN TO HIM!!!!!

Mike do you have a 262 yourself?

 

[MustangMike]

Mike do you have a 262 yourself?

No I have the 360 instead, great mid size saw. They both run very nice, and as you know my 362 is real darn close, and I don't have to tune that one! Keep in mind the 362 is a bit handicapped, it is only 59 cc, but some definitions it is only a 50 cc saw!!!

My Nephew loves the 262, but he also told everyone (at a family get together where we cut 15 cord for an injured relative) that if I had a few more beers the 360 would have gone home with him! He likes em both!

The great thing about knowing a ported as good as Al, is you can have a great running saw in any flavor you want!

 

[Duane(Pa)]

Eye, uh, umm, always wanted to ask a Dr....um, uh , well, how long do they stay "tight"?
I mean, I have broken a few in..., but have never worn any out. I know they get heavier, and more noisy. I don't run a long bar, so maybe the answer just isn't as obvious?? Anyway, I know you guys are all about helping, so I just thought eye wood axe.

 

[Red97]

Glad to get this stinky pig off the bench...

Just a dp cover bit off the base, set squish, little widening on the exhaust. Light port job lol.


Sent from my SM-G950U using Tapatalk

 

[p61 western]

Glad to get this stinky pig off the bench...

Just a dp cover bit off the base, set squish, little widening on the exhaust. Light port job lol.


Sent from my SM-G950U using Tapatalk

That's cool and all, but the the Echo is chitting all over it lol.