Saw video thread

[RI Chevy]

Stihl MOFO 026 with 16" .325 full chisel bar and chain and 8 pin rim. This was the hardest part of the tree with. Chain wasn't the best, but it still did well. I think it was tuned around 14500. I show the crotch piece at the end of the video.
1st cut I almost lost my phone from the cookie that shot out. LOL

 

[RI Chevy]

Mason, how much did you advance the timing on the jred?
@huskyboy

Sent from my SM-G930V using Tapatalk

 

[huskyboy]

Mason, how much did you advance the timing on the jred?
@huskyboy

Sent from my SM-G930V using Tapatalk

Roughly 1/3 key way if I'm remembering correctly.

 

[Deets066]

You can see the shock of that letting loose in the camera at the end of your snip cut. Too cool.

Never really noticed that until you said something, that is pretty cool

 

[RI Chevy]

Roughly 1/3 key way if I'm remembering correctly.

Seems like alot. I thought I could hear it popping.
But it ran strong.

Sent from my SM-G930V using Tapatalk

 

[huskyboy]

Seems like alot. I thought I could hear it popping.
But it ran strong.

Sent from my SM-G930V using Tapatalk

That's the 14k limiter. The autotune saws hit the limiter make that sound. If it was popping it would make the limiter sound under load and not clean up.

 

[RI Chevy]

Ahh. OK. [emoji106]

Sent from my SM-G930V using Tapatalk

 

[huskyboy]

Popping

Retarded the timing

 

[RI Chevy]

How did you fix it? Cut a new key with less advance?

Sent from my SM-G930V using Tapatalk

 

[huskyboy]

How did you fix it? Cut a new key with less advance?

Sent from my SM-G930V using Tapatalk

I put a stock flywheel on it, but I could have just turned it clockwise till it stops to retard it back to factory spec. The key is cast into flywheel on these. I'm not sure how much jms advanced that 372, but it was too much.

 

[RI Chevy]

Cool. [emoji106]

Sent from my SM-G930V using Tapatalk

 

[malk315]

I put a stock flywheel on it, but I could have just turned it clockwise till it stops to retard it back to factory spec. The key is cast into flywheel on these. I'm not sure how much jms advanced that 372, but it was too much.

Learned some new things from this. Thanks!

Sent from my XT1585 using Tapatalk

 

[Canadian farm boy]

I'm about done with this one now.

 

[Time's Standing Stihl]

Beast mode!

 

[GCJenks204]

I'm about done with this one now.

I guess that's okay. I'm finally home and have watched the other one, thank you for waiting to share it.

 

[Canadian farm boy]

Just about done with this one now too.

 

[GCJenks204]

Just about done with this one now too.

Do you know what RPM it held in the cut? Sounds / looks great.

 

[Canadian farm boy]

Do you know what RPM it held in the cut? Sounds / looks great.

Not sure on the in cut rpms. Once I get the tach on it I'll be able to tell exactly

 

[Chainsaw Jim]

 

[Chainsaw Jim]

Testing more race chain...