Saw video thread

[MustangMike]

It'll probably pull it too !!!!!

It was at the GTG, even Lee ran it!!!

 

[huskyboy]

Lemme know if you want someone with a crapload of 90cc saws to help you with any big stuff.

Them logs your standing on ain't chump change

Got a few 90cc too

 

[MustangMike]

In the past year went from 0 to 3 (90 cc)!!!

 

[RI Chevy]

Nice Mike.

Sent from my SM-G930V using Tapatalk

 

[huskyboy]

In the past year went from 0 to 3 (90 cc)!!!

The power is extremely addicting.

 

[Manofstihl066]

Tree Monkey 661
24" 3/8 Square filed lgx full comp with 8 pin rim. Wood is dry red oak.

 

[Time's Standing Stihl]

Tree Monkey 661
24" 3/8 Square filed lgx full comp with 8 pin rim. Wood is dry red oak.

Smokin! Dayum!

 

[Manofstihl066]

Smokin! Dayum!

Thanks Clint, I think I'm hooked on square filing.

 

[RI Chevy]

Some nice cutting there too. Nice plunge cuts. Saw held RPM strong.

Sent from my SM-G930V using Tapatalk

 

[TreeLife]

Tree Monkey 661
24" 3/8 Square filed lgx full comp with 8 pin rim. Wood is dry red oak.

Sounds good amigo, nice chain on the bish too

 

[RocketRoss57]

Ratty ol 262 new rings mains and seals.

 

[Chainsaw Jim]

No more leaky seals or intake air leaks. I have a little bit more fine tuning and it'll be ready for some friendly competition.

076 with 60" bar, 8 pin .404 full comp, 32" wood..

 

[Frank bierce]

No more leaky seals or intake air leaks. I have a little bit more fine tuning and it'll be ready for some friendly competition.

076 with 60" bar, 8 pin .404 full comp, 32" wood..

That thing looks like it is throwing firewood pieces for chips. Lol

 

[Chainsaw Jim]

That thing looks like it is throwing firewood pieces for chips. Lol

This one really seemed like it. The chips were chunks about the size of a pencil eraser. It's running 9-pin 3/8 full comp 32" bar. It busted five rakers on the one cut. The chain was originally set up for much softer green hardwood and I should have not used it. I'm going to run it with .404 to see if it pulls it worth a crap.

 

[Dub11]

This one really seemed like it. The chips were chunks about the size of a pencil eraser. It's running 3/8 9 pin full comp. It busted five rakers on the one cut. The chain was originally set up for much softer green hardwood and I should have not used it. I'm going to run it with .404 to see if it pulls it worth a crap.

Dam! That thing looks *f-wording pissed!

 

[TreeLife]

I like the videos you do of the older saws @Chainsaw Jim

I'd love to see what that 066 would do with a short bar and a aggressive chain!

 

[RI Chevy]

The 066/394 would probably go through green wood like a hot knife through butter. That thing really rips. [emoji106]

 

[Dub11]

This one really seemed like it. The chips were chunks about the size of a pencil eraser. It's running 9-pin 3/8 full comp 32" bar. It busted five rakers on the one cut. The chain was originally set up for much softer green hardwood and I should have not used it. I'm going to run it with .404 to see if it pulls it worth a crap.

Build thread?

 

[Mastermind]

This one really seemed like it. The chips were chunks about the size of a pencil eraser. It's running 9-pin 3/8 full comp 32" bar. It busted five rakers on the one cut. The chain was originally set up for much softer green hardwood and I should have not used it. I'm going to run it with .404 to see if it pulls it worth a crap.

With the right chain..........that will be a handful.

Very nice Jim.

 

[paragonbuilder]

Build thread?

He did one Wayne. It's somewhere...


Sent from my iPhone using Tapatalk