Saw video thread

[mdavlee]

7910>460>440

 

[jmssaws]

I like the mount design, I like the ergos...sexy sawz

Sexy indeed!
Here's my smurf

 

[TreeLife]

I love blue Dolmar's...I like em with grey tops! Faptastic

 

[huskyboy]

This is too much. I need to try a Dolmar.

 

[jmssaws]

This is too much. I need to try a Dolmar.

Mike Lee has been banging this drum for a while,we've just started listening.

 

[SOS Ridgerider]

This is too much. I need to try a Dolmar.

We can arrange that Mason.... I know a guy...

 

[TreeLife]

Yes you do. They are the real McCoy, I promise. I've had that saw in my hands for 3 years, it's felled and bucked a lot of big wood with my gorilla ass yanking on it. I've run 20" bars on it, 24, and 28 (my most recent aquisition, a weight reduced Shugihara).

I like the 28 on it the best for logging duty, it has lots of torque. I can lean on mine with some force and it feasts.

@huskyboy

 

[SOS Ridgerider]

Sexy indeed!
Here's my smurfView attachment 59284

That one's extra sessy!

 

[jmssaws]

I'm not prejudice, I like them no matter what color they are.

 

[Onan18]

Here's Joe's 045 with its first cuts. It's running 3/8 full skip square ground chisel off the roll with rakers set at .035".
I'll get the timing backed off just a smidge to get rid of that tick and it'll be good to go.

Boy Dad had better hang on tight, looks like that beast might just take off with him in tow!

 

[Brewz]

Rebuilt MS460 with $20 Chinese piston and cylinder.
LOTS of grinding has it at 104/122/76 and is reving here to 14600

 

[drf256]

Here's Joe's 045 running the first couple cuts after the build. It's running 3/8 full skip square ground chisel off the roll with rakers set at .035".
I'll get the timing backed off just a smidge to get rid of that tick and it'll be good to go.

Damn Jim, that's impressive.

I'm sure Joes dad is gonna love it. Lots of low end grunt fo sho.

 

[drf256]

Looking good Mike. I bet most of the gains are from the machine work alone

 

[Chainsaw Jim]

Damn Jim, that's impressive.

I'm sure Joes dad is gonna love it. Lots of low end grunt fo sho.

Thanks Al.
This is one of the stronger saws I've ran. I want to see this thing up against a ported 390 or 660.

 

[RI Chevy]

What size motor is in that 045?

 

[Chainsaw Jim]

It's an 045 super 54mm.

 

[RI Chevy]

Nice. TY

 

[Onan18]

What size motor is in that 045?

I believe that they are ~87cc

 

[MustangMike]

Dayum... Any chance this saw will be at the NY or CT GTGs ? I'm trying to attend both.

Don't worry Erik, now that CFB is done with practice, mine is next, and it will be at both GTGs!

CFB, is that a D cylinder???

 

[Canadian farm boy]

Don't worry Erik, now that CFB is done with practice, mine is next, and it will be at both GTGs!

CFB, is that a D cylinder???

Yes it is.