Saw video thread

[Duane(Pa)]

NOT!

'bout 11.25x8.5
Next round will be a 7 pin on the 357 and head to head w/ the 346 to see which is faster. Any guesses?
Mike, do you keep go fast chain rakers @ 25? Feels like it could pull more.

All joking aside, I really enjoy watching those things chewing through the wood. Keep posting the footage!

 

[Red97]

I really should learn how to file a square chain...

Muh saws are slow.

 

[Wolverine]

I run higher than that usually. I like to keep 12k or higher in the wood.

My first run with the good chain was laughable. No way I'd post it. I kept the rakers high and it didn't cut fer sheet. I had to push pretty hard, no self feed and it wandered a bit. So I went with about 25. Better, but definitely not keeping R's up that high. Do you feeler gauge each one, have a guide.. or... please don't say you just hit 'em a swipe or 2. Gawd it'll take me years to get fast!

 

[mdavlee]

I don't measure nothing. I just look at them and hit them a swipe or 3 and try.

 

[Wolverine]

Keep posting the footage!

Andy had just as much fun as I. He ran the 50 and the Poulan but I didn't video them. Shoulda!

 

[Magic_Man]

I really should learn how to file a square chain...

Muh saws are slow.

Our saws aren't slow, our chains are slow ! Lol

 

[Chainsaw Jim]

That's getting rusty, time for a pipe. It's another bolt on item till you can locate a non rusty muffler lol

Actually it is in great shape. It just needs cleaned up and painted. You didn't notice the pipe I have behind it? That extension is an experimental pipe idea for a stock muffler set up.

Wrist pin spacer?

That and a good washer to enlarge the footprint up against the case so it doesn't cause any friction damage. I want to have a rectangular plate welded between the wrist pins to assure stabilization, though it is very solid as it is and doesn't flex.

 

[huskihl]

Actually it is in great shape. It just needs cleaned up and painted. You didn't notice the pipe I have behind it? That extension is an experimental pipe idea for a stock muffler set up. View attachment 19294



That and a good washer to enlarge the footprint up against the case so it doesn't cause any friction damage. I want to have a rectangular plate welded between the wrist pins to assure stabilization, though it is very solid as it is and doesn't flex.

Looks like it gets some heat away from the engine too

 

[bikemike]

It's some kind of Balsa wood he found at the hoppy shop..... Really light, and easy to work with power tools...

Yeah I like that balsa wood. Makes for some good air frames

 

[Deets066]

Glad to see this thread goin strong guys! I love watching the videos, keep em comin

 

[Magic_Man]

Breaking in a fresh build

 

[czar800]

 

[Chainsaw Jim]

Here's one with a brand new piston on its first few cuts.

 

[Deets066]

Here's one with a brand new piston on its first few cuts.

Jim that is bad ass pioneer, but what is the smock about?

 

[Chainsaw Jim]

Jim that is bad ass pioneer, but what is the smock about?

gawdammut!....I take it off now when I step away from my work bench. Lol

 

[Motorhead]

Here's one with a brand new piston on its first few cuts.

That's some darn fine chainsaw surgery

 

[bikemike]

Need some small saws in the mix

 

[Deets066]

Need some small saws in the mix

Not sure if I posted this here or the square file thread, 034 super

 

[drf256]

Not sure if I posted this here or the square file thread, 034 super

@Welder56

Check out how well Deet's 34 runs.

 

[Welder56]

@Welder56

Check out how well Deet's 34 runs.

Ya she's rippin bud. Gonna try matching it?? That should be the benchmark of a good running saw lol