Saw video thread

[stihl_head1982]

MOFO @drf256 MS-261 VII on third tank of fuel

Nice running saw. It's sure turning some RPM's also.

 

[Duane(Pa)]

Nice running saw. It's sure turning some RPM's also.

Yes, my “prescription” is always Build it to Scream please... Most any tree on our property is easily handled by 18” bar. This saw Stihl has plenty of torque if needed though.

 

[82f100swb]

My MS261, it had a plug come apart and the jug was pretty mangled, so I ground until it was runable, timing isn't exactly like I wanted, but it runs not bad.

 

[RI Chevy]

Was saw Mtronic or regular carbed?

 

[82f100swb]

Carbed, gen 1

 

[82f100swb]

Pioneer P51 I recently got going for a co-worker of mine. She's a mean old girl.

 

[huskyboy]

Yes, my “prescription” is always Build it to Scream please... Most any tree on our property is easily handled by 18” bar. This saw Stihl has plenty of torque if needed though.

Docs saws always have good torque/lugging ability

 

[av8or3]

Here are two I wanted to get a video of, not really meant to be a comparison but still have half a tank of fuel in the 088 from last weekend and I’m running my MMWS 500i for the first time. I’m quite pleased with both.

Here’s another video I shot featuring mostly the 500i. There is the annoying sound of my splitter running and I apologize.

 

[RI Chevy]

Nice saws! 880 tune seemed spot on.

 

[ZukiRyder440]

My grandpa’s Jonsered 455. Pulled it off the shelf after 2-3 years of sitting. Popped in 2 pulls and fast idled the next pull. It tuned nice, started REALLY easy (cold start was 2 pulls and hot start was 1). I really like it

 

[ZukiRyder440]

Muh ported 281 just doin some noodlin and testing out my first square filed chain.

 

[RI Chevy]

Nice Austin. Does the filter stay clean?

 

[ZukiRyder440]

Nice Austin. Does the filter stay clean?

Thanks Jeff and yes it does! Got it oiled up and cleaned

 

[RI Chevy]

Cool. 281 pulls really well.

 

[ZukiRyder440]

Cool. 281 pulls really well.

Thanks. I love me a good 2 series Hooskie

 

[Agent Smith]

Just did some mild mods to this 350. Nothing out of the ordinary. 1st tank since full tear down and rebuild

 

[82f100swb]

Finally ordered up a 3/8 7t mini spline sprocket with some parts, wasn't sure how much the 026 was going to like it, but, looks like it didn't really care.

 

[RI Chevy]

Did you do any comparison cuts with .325 chain to see if there was any differences?

 

[MustangMike]

Looks to me like it ran the 3/8 just fine!

 

[RI Chevy]

Yes Mike. Never stated it didn't. Just curious if he did any comparison test cuts with different chain. One never really knows unless you experiment for yourself.
Carry on.