Saw video thread

[ferris]

20" full comp, 3/8 pitch, 8 pin sprocket gets my vote.

But only in softwood

 

[WillG]

I'll have to borrow an 8 pin.

Sent from my E6910 using Tapatalk

 

[ferris]

I'll have to borrow an 8 pin.

Sent from my E6910 using Tapatalk

Buy one, they are cheap.

 

[Ronie]

White top 61 with a 670 cylinder and a 630 top cover.

 

[TreeLife]

Perhaps you much timing?

 

[Ronie]

Perhaps you much timing?

I haven't done anything to the timing yet. I still need to get a good tune but I'm out of wood at the moment.

 

[huskihl]

I haven't done anything to the timing yet. I still need to get a good tune but I'm out of wood at the moment.

I thought timing too. Must just be a hair rich

 

[Ronie]

I thought timing too. Must just be a hair rich

I made it a little richer before I made them cuts. Here's it tuned a little leaner, 14,120 wot.

 

[ferris]

Now I would think it’s nearly to lean

 

[huskihl]

Just did this one yesterday. Original carb set up

 

[shadco]

Just did this one yesterday. Original carb set up

Sweet

.

 

[Ronie]

I thought timing too. Must just be a hair rich

Are y'all talking about the way it has that cut out sound? My 288 sounds almost identical. I don't really hear it when I'm cutting but it stands out on video.

 

[Ronie]

Would the coil cutting in and out sound like that?

 

[huskihl]

Would the coil cutting in and out sound like that?

I think it’s probably just 4 stroking a bit.

 

[Ronie]

I think it’s probably just 4 stroking a bit.

Thanks!

 

[huskyboy]

Thanks!

If it’s a china made bosch plug on the saw throw it out as fast and far as you can sir. I’ve had several of those plugs do weird azz things. Replace with ngk or champion.

 

[Ronie]

If it’s a china made bosch plug on the saw throw it out as fast and far as you can sir. I’ve had several of those plugs do weird azz things. Replace with ngk or champion.

It's got a new NGK plug.

 

[dustinwilt68]

This was with 20" bar and out of the box LGX, never touched the rakers or anything. I am very pleased with it.

 

[TreeLife]

This was with 20" bar and out of the box LGX, never touched the rakers or anything. I am very pleased with it.

Gasp, a stihl?!

 

[P.M.P.]

Just did this one yesterday. Original carb set up

Angry little guy couldn't wait to get out of the MEATLOCKER