Saw builds

[PA Dan]

Found it on Another Site!

 

[jmssaws]

Cylinder is fine

There is poly flywheel 066's just not in the small case.

 

[PA Dan]

Cylinder is fine

There is poly flywheel 066's just not in the small case.

Hmm...wonder what the heck I have now!

 

[jmssaws]

Hmm...wonder what the heck I have now!

You have a Poly flywheel 066

 

[huskihl]

It's the same as mine. Poly fw, bubble top, plastic badge

 

[PA Dan]

You have a Poly flywheel 066

But on a short case? The case has wear marks from the recoil vibrating because the bottom mounting holes were busted off. That was the wide recoil cover for the poly flywheel. Not sure if it's visible in this pic or not.

 

[jmssaws]

It's not a short case.
The recoil is a 660 because it has stihl molded into it. All of the recoil will fit any of the 066/660. The earlier saws had a orange badge in the middle of the recoil.
In 1996 they changed to the big bearing, big crank,big case and poly flywheel.
There still 066's till 2002.

 

[jmssaws]

But on a short case? The case has wear marks from the recoil vibrating because the bottom mounting holes were busted off. That was the wide recoil cover for the poly flywheel. Not sure if it's visible in this pic or not.

All 066's have the same wide recoil.
The badge is all that's different

 

[PA Dan]

Yours doesn't have the short case though?

 

[PA Dan]

It's not a short case.
The recoil is a 660 because it has stihl molded into it. All of the recoil will fit any of the 066/660. The earlier saws had a orange badge in the middle of the recoil.
In 1996 they changed to the big bearing, big crank,big case and poly flywheel.
There still 066's till 2002.

Ok so mine isn't a short case then? It looks the same as my 064 case.

 

[jmssaws]

If the poly flywheel crank works then it's not a short case.

 

[Brewz]

Short case has a little white plug in the front of the case below the oil tank plug
Long case does not.

Short case:


Long case:

 

[PA Dan]

Here's mine.

 

[jake wells]

found me a 064 im going to text the guy later and find out how much he wants.
http://bgky.craigslist.org/grd/5694013836.html

 

[Deets066]

Dave had a really cool thread about case capacity on these 1122's I think there were like 5 cases or something. Dan I think you have the same case as I do, it's not the tight case 064/early 066. And it's not the big 660 case. My saw is all original flattop decomp with a poly flywheel. It's somewhere between the short and long cases.

 

[PA Dan]

Here is Dave's thread and mine doesn't look exactly like any of them. Hope your right Deets!

http://opeforum.com/index.php?threads/2136/

 

[Brewz]

Yeah there must have been a period where they fitted large cranks up to short cases or something.
That is an interesting one.

It looks to have the large size oil seal of the long case with the front design of the short case.

Very cool!

 

[Brewz]

What is the flywheel part number?
Its not running an 046 poly flywheel or something like that is it?

 

[Deets066]

Here is Dave's thread and mine doesn't look exactly like any of them. Hope your right Deets!

http://opeforum.com/index.php?threads/2136/

Yours is the same as mine, oval plug big bearing 066, 86 ml

 

[PA Dan]

What is the flywheel part number?
Its not running an 046 poly flywheel or something like that is it?

Case 1122 020 2962
Fly wheel 1122 400 1217
Crank. 1122 61
Coil. ?