Saw builds

[jmssaws]

I bet the low compression spools up more

There all 4 around 185.
My 066 and dall's have a oem 66 piston and my 064 and cfb's are 288 pistons.

My 064 was the strongest saw I've built but dall's clobber it. Shaun ported my 066
And cfb ported his after I done the machine work.

 

[junkman]

just using the u-tube clock i got roughly 23 sec saw 1 ,20 sec saw 2 ,and 17 on 3 and 4

 

[jmssaws]

just using the u-tube clock i got roughly 23 sec saw 1 ,20 sec saw 2 ,and 17 on 3 and 4

3 and 4 are close but I think dall's is faster.

 

[junkman]

i bet they are within 1 sec of each other ,the 064 sounded pissed off though ,

 

[jmssaws]

i bet they are within 1 sec of each other ,the 064 sounded pissed off though ,

 

[jmssaws]

The last 2 saws are putting it to the others.
My 064 is new and tuned 500 rpm less than the others.

My chain is a little on the feisty side.

 

[Mastermind]

You're doing great work Jason. It's a pleasure to see that......

 

[jmssaws]

You're doing great work Jason. It's a pleasure to see that......

Thanks randy.

 

[Mastermind]

Thanks randy.

You are welcome brody. Seriously.......I've seen a lot of guys try to do this porting gig and fail miserably. You are doing good work, and have happy customers. That's good for you, them, and this site.

Now.........you gotta build me a saw. LOL

 

[jmssaws]

Cfb's saw has stock transfers, exhaust is 70% and the intake is squared away little he said.

I don't want to belittle it and that's not the reason for this,it's a strong saw but it's running against saws that are owned by a guy that makes a living porting 1122's.

I video it with mine for comparison so when I'm done rubbing my weiner on it we all can see if it's faster.

Nice work mike,good clean grinding.

 

[Mastermind]

No pics of the weiner rubbing please.

 

[junkman]

How do you feel a 661 hangs or not with these ?

 

[Hedgerow]

Excuse me while I whip dis out..

 

[Hedgerow]

How do you feel a 661 hangs or not with these ?

The 661 in muh saw box right now will hang with em fine.

 

[Chris Zautner]

The 661 in muh saw box right now will hang with em fine.

Oh, looks like we are going to have a show down. LOL

 

[Mastermind]

Stand back fellers........don't wanna get none on ya.

 

[jmssaws]

Mopars will certainly.

 

[jmssaws]

I got some great weiner pics but can't fn load them!

 

[jmssaws]

I would like very much to get one or two of these saws together in one spot with kevins 661.

I know him well and have seen a few videos of it but a video has no feel to it.

Feel is another problem for me though,my 066 feels much stronger than dall's but I've never beat his so feel will lie to you. I have to video everything

 

[Mastermind]

Hey Matt........I gots a heifer that's wheezing. I hit her with 24cc of LA200. Good?