Saw builds

[jmssaws]

nice deep sound to it

I didn't think I would ever get it back like it was,it was still very strong but off at the same time.
It has the grrrrrr feel back,that is one stout 066.

 

[junkman]

Sounds like it has some nuts ,like a good running 250

 

[paragonbuilder]

It took a bucket of water to find it but I finally fixed my 066.

Where was the leak?


Sent from my iPhone using Tapatalk

 

[jmssaws]

I replaced both seals and both leaked.
Put oem ones in it and fixed it.

 

[jmssaws]

Sounds like it has some nuts ,like a good running 250

Lower compression too so it will live a long time.

 

[paragonbuilder]

I replaced both seals and both leaked.
Put oem ones in it and fixed it.

Couldn't find it with ether?


Sent from my iPhone using Tapatalk

 

[jmssaws]

The flywheel side I could but the pto side only leaked under pressure

 

[Mastermind]

I replaced both seals and both leaked.
Put oem ones in it and fixed it.

That weird. I've used a metric chit ton of aftermarket seals.

 

[jmssaws]

That weird. I've used a metric chit ton of aftermarket seals.

Me too.
Both from the same package and both appear fine.

 

[Mastermind]

I hate to hear that Jason. Makes a feller worry.

 

[Mastermind]

You got anything cool and different going on bro?

 

[jmssaws]

You got anything cool and different going on bro?

Not to much that's different, I got a shop full of 064's and 066's.
Trying a few new things.

 

[junkman]

Need some El' saw build threads .

 

[Mastermind]

It takes a lot of time to do those threads Brian. But on the next 372XP I get I'm planning on doing a detailed thread.

 

[Sty57]

It takes a lot of time to do those threads Brian. But on the next 372XP I get I'm planning on doing a detailed thread.

Do ya need a ginnie pig? I can send one of mine down for ya.......

 

[jmssaws]

Need some El' saw build threads .

If I could post pics I'd start a thread on a kool saw,a 064 i got that's built from nos parts and has only ran a second.

I'm gonna sell it but would like to start a thread on whether or not it should be stock or ported.

 

[Sty57]

I know there very rare and you probably wont see one for a long time......

 

[Mastermind]

If I could post pics I'd start a thread on a kool saw,a 064 i got that's built from nos parts and has only ran a second.

I'm gonna sell it but would like to start a thread on whether or not it should be stock or ported.

You still can't post pics?

@exCanuck @Jon1212 @Gentleman

We need to find out why.

 

[jmssaws]

You still can't post pics?

@exCanuck @Jon1212 @Gentleman

We need to find out why.

I haven't been able to for a while.
Keeps telling me the file is to big for the server

 

[dall]

heres the picture of the saw jason is talking about