SOLD Sabre chain loops and part rolls

[ajschainsaws]

I've got some loops and part reels of sabre chain with tie straps all details of what is there will be sent to members who want the details thanks

 

[cdixon]

Post the info. These other guys may get a true piece of USA made history that they have never used before. The last loop I have is 15 years old. Full comp with Bumper Links and will out cut any 3\8 loop Oreagon has made. Will sharpen to a razor edge on the Chisel Chain very easy. And hold that edge quite well. Not as good as Stihl but was a close second.

 

[ajschainsaws]

Right I haven't got any information on sabre chain or clutch drums I would be grateful if I could have some help with part numbers and chain identification now here below is the chain I have too sell that needs to go to you guys who will appreciate this chain

All rolls are approx length but wil be measured properly when it comes too point of sale there has been so many messages about this chain iam shocked how iconic it is

15-20ft of 1/4 .050 no 18 on drive link

60ft of 404 .058 No 858 on drive link

60ft of chain. With 58 on the drive link

25ft of 404 no 863 on drive link. Sold Sold

18ft of .325. No 820 on drive link. Sold. Sold

Several boxes of joiners and tie straps that will go with each roll of chain and extras sold
In one lot

Carlton A2 3/8 30ft

Carlton A3 3/8 20ft

Carlton B2 404 30 ft

Carlton B2 404 40ft

30 ft oregon 404 chain ??

10 ft oregon 20A stamped on drive links

60 foot. Sachs Dolmar 404 chain 103 on drive links sold Sold

 

[ajschainsaws]

Here are some photos of the reels of chain

 

[ajschainsaws]

Sold

 

[Bill G]

You had some GREAT chain there