Remington

[67L36Driver]

We now have a thread for Remington.

And, early Deere and monkey Wards.

 

[sawfun]

Great thread start, I would love to see some 880 or 990 pictures.

 

[thomas1]

I think JJ has a 880.

 

[Mastermind]

I found a 990 today........in a crate.

It's sorta apart now but it looks like this when reassembled.

 

[thomas1]

:farkyoubig:

 

[Mastermind]

Bawhahahahaha

:farkyoutoo:

 

[Mastermind]

I think this 990 belongs to Thomas1.

 

[67L36Driver]

Skinny little geezer running his SL-5R at Fort Scott.

 

[Hoggwood]

The Remington saws show up very infrequently around here. Stumbled onto this one though. It starts/idles and throttles well. Haven't had it out in the bush yet. Thinking I might need to deal with some tired clutch springs. And, some spent friction washers in the FM.

I feel sorry for my neighbours. The sound is almost enough to cut wood.

 

[rocketnorton]

ill get to it one day...

 

[fossil]

I only have one running Remington. I had two SL-9's given to me. One with a roached P&C and the other in good shape. Both have the stack or "zippo" tube on the exhaust port. I fired the running one up after a points clean up , carb kit and fuel line and filter. I did in the garage to pre tune it. That was enough. My ears were ringing for an hour.
It might make an appearance at Halloween.

 

[Yukon Stihl]

My biggest Remmy,cool lines for a saw

 

[67L36Driver]

DuPont magic mirror finish was used on all GM cars back when. But, not a wiff went on Remington saws.

 

[67L36Driver]

Baby blue Wards/Bantam type.

https://www.ebay.com/itm/401246351569

MONTGOMERY WARD CHAINSAW Wards Vintage Chain Saw Motor Engine Man Cave Retro

I've only seen three like it in the past five years.

 

[Lee H]

In need of a starter cup for Remmy PL7. My insert is loose and spinning.
A part number would help to locate one if anyone can help.


TIA

Lee

 

[67L36Driver]

Check Chainsawr.com for the IPL and the starter cup?

 

[67L36Driver]

Use caution!

Rusty bar painted silver.

https://www.ebay.com/itm/282301584738

VINTAGE REMINGTON ROLLER NOSE CHAINSAW BAR

And, it should be .058" gauge.

 

[67L36Driver]

In need of a starter cup for Remmy PL7. My insert is loose and spinning.
A part number would help to locate one if anyone can help.


TIA

Lee

Check your inbox.

Insert???? I don't see an insert.

Cup + Screen......64163
Cup itself.......64162

Its entirely possible that someone used an 051 type Stihl cup for repair. Stihl used Fairbanks Morse starters back in the olden days.

 

[67L36Driver]

You can get 40 for 20-25 bucks from Partstree.
Common Fairbanks Morse starter friction washer..
Fit Remington, Homelite and Stihl.



https://www.ebay.com/itm/192060820278

NEW REMINGTON FIBER WASHER ON STARTER PN 64078 SL-4A, SL-9, SUPER 754, BANTAM

What a rip off!

 

[67L36Driver]

Someone need to get this:


https://www.ebay.com/itm/252746648732

Montgomery Wards Power Kraft 5.0 chainsaw Remington SL-55 low hour 82cc roller

It's a PL-55.

If I didn't already have four.[emoji849]