Raffle for Paragonbuilder's friend whose wife has breast cancer

[paragonbuilder]

I'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.






8 @huskyboy
9 @Dub11
10 @Leerod83
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]



[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315

[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.

[emoji41]3. (5 @dieselfitter) Port job by @tree monkey

4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.

5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84

[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder

7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS

[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]

9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.

10. Woods port from @Mastermind

[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.

12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204

13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.

14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws

15. Custom built benchmount chainsaw vise from @Mycamaro_68

16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @dahmer on AS

[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave

 

[Moparmyway]

I've got a low use MS461(10 tanks), so I was just goofing on the 576. I would have actually taken the tool kit.

I was gunning for the Treemonkey port job. I would have loved to send my 562 to him !!

 

[malk315]

Free hand milling at Chris' today -- my phone camera got hosed a bit and audio screwed up... final product in the 2nd video.

 

[huskyboy]

I'll be honored to accept the mastermind port job ! I have a saw that needs some extra bananas! Looks like I'll be moving to a different country like @Beavis331 to avoid @Jon1212 's wrath ! I'm so happy to be a part of this raffle and honestly if I didn't win anything at all just seeing the video of the gentleman receiving his money made me smile.

 

[paragonbuilder]

I'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.







9 @Dub11
10 @Leerod83
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]



[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315

[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.

[emoji41]3. (5 @dieselfitter) Port job by @tree monkey

4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.

5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84

[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder

7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS

[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]

9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.

[emoji41]10. (8 @huskyboy)
Woods port from @Mastermind

[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.

12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204

13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.

14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws

15. Custom built benchmount chainsaw vise from @Mycamaro_68

16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @dahmer on AS

[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave

 

[paragonbuilder]

Wayne you are up!

 

[Jon1212]

I'll be honored to accept the mastermind port job ! I have a saw that needs some extra bananas! Looks like I'll be moving to a different country like @Beavis331 to avoid @Jon1212 's wrath ! I'm so happy to be a part of this raffle and honestly if I didn't win anything at all just seeing the video of the gentleman receiving his money made me smile.

No worries there. I have two saws headed to TN, and one to NC.

 

[paragonbuilder]

No worries there. I have two saws headed to TN, and one to NC.

I think he speaks of the videoed crotch kicking....

 

[Dub11]

First of all thanks y'all again OPE folks for being super cool!

Number 15 chainsaw vise will be my pic please.

 

[Jon1212]

I think he speaks of the videoed crotch kicking....

He can't get out of that.

Hopefully he hangs onto the MMWS longer than the last ported saw someone gave him......

 

[huskyboy]

He can't get out of that.

Hopefully he hangs onto the MMWS longer than the last ported saw someone gave him......

You can bet I will sir! Still miss that 044 . 395 is the saw I hope to get loaded with bananas.

 

[paragonbuilder]

I'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.








10 @Leerod83
11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]



[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315

[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.

[emoji41]3. (5 @dieselfitter) Port job by @tree monkey

4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.

5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84

[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder

7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS

[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]

9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.

[emoji41]10. (8 @huskyboy)
Woods port from @Mastermind

[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.

12. NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204

13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.

14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws

[emoji41]15. (9 @Dub11)
Custom built benchmount chainsaw vise from @Mycamaro_68

16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @dahmer on AS

[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave

 

[Mycamaro_68]

First of all thanks y'all again OPE folks for being super cool!

Number 15 chainsaw vise will be my pic please.

I'm glad I could have been a small part of this! Thanks to everyone who had a hand in it!

 

[huskihl]

He can't get out of that.

Hopefully he hangs onto the MMWS longer than the last ported saw someone gave him......

 

[exSW]

I give up. I'm going to bed.

 

[huskihl]

I'd like to say thanks to the members who donated both $ and raffle items to help these friends of Dan's. Hopefully they'll find a cure for the big C one day, so we'll be able to spend maybe another 30 or 40 years with our loved ones. My mom and dad were taken way too soon.

I'm glad I could help, even if only a little bit

 

[Poleman]

11. Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @PolemanPictures below see his post.


IF its not ported yet, please don't port it. I'll take it stock if you don't mind.

If it's ported, I'll still grab it


It is ported, sorry!!

Thanks everyone for HELPING Dan's friend and his wife!!!!!

 

[Dub11]

11. Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @PolemanPictures below see his post.


IF its not ported yet, please don't port it. I'll take it stock if you don't mind.

If it's ported, I'll still grab it


It is ported, sorry!!

Thanks everyone for HELPING Dan's friend and his wife!!!!!

I've heard how well you can work over a carb from @Czed I imagine this saw is a fugging runner!

 

[Poleman]

It's a VERY good saw and runs really well and fun to run with the power to weight ratio going for it. This would be a steep terrain saw because of its light weight and power, making it easier to get around without sacrificing power.

 

[paragonbuilder]

I'll move each winner to their choice as they are picked to keep things updated.
And I'll put my [emoji41] in front of completed items.

11 @lfnh
12 @cease232
13 @exSW
14 @stihl livin
15 @Kensie1988
16 @Poleman
17 @malk315
18 @Tpagel
19 @sunfish
20 @Jon1212
21 @RI Chevy
22 @Finnrpm
23 @Duce
24 @malk315
25 @Czed
26 @Hinerman
27 @Big1066ih
28 @backhoelover
29 @CapitaineHaddoc
30 @jacob j[/QUOTE]



[emoji41]1. (7 @Ryan Browne)
Husky 262XP with KS jug / HDA87 carb many new parts including seals, carb kit, no base gasket + squish adjusted, ports touched a bit, needs very little PHO from @malk315

[emoji41]2. (2 @Beavis331)
Husky 576XP from @Onan18 including new jug, @Moparmyway will install to make it work ready.

[emoji41]3. (5 @dieselfitter) Port job by @tree monkey

4. NOS Total Super Bar 20" Husky small mount from @Czed pictured in his post below.

5. 3 new chain loops shipped. Have square or full chisel Oregon 3/8 .050 Ideally 24" or less from @Armbru84

[emoji41]6. (3 @Sleeper)
Husky 262XP rebuilt and work ready with optional port work (winners choice) from @paragonbuilder

7. Muffler mod by @Miller Mod Saws (you send muffler to Carl, @svk from AS will cover the cost for him to perform the work and return) OR $50 off a woods port at Miller Mod Saws. from @svk on AS

[emoji41]8. (4 @huskihl)
Makita/Dolmar DCS6421 saw -- see pictures below in this thread from @astnmacgto [/B]

9. Brand new, never used SIP Protection stretch security pants. Size L. see @CapitaineHaddoc pictures below. 38-35" waist with 32" length.

[emoji41]10. (8 @huskyboy)
Woods port from @Mastermind

[emoji41]11. (6 @Moparmyway)
Stihl 036 totally gone through with new bearings, seals, gaskets, carb kit, fuel line & filter, impulse line, rings, squish and base cut, ported and work ready PHO from @Poleman Pictures below see his post.

[emoji41]12. (10 @Leerod83)
NIB Stihl ES bar 20" 72DL & 2 x new 72DL A1LM Carlton chains see pics below from @GCJenks204

13. Brand new wool w/ nylon chainsaw pants...size 44x32 from @bowtechmadman on AS.

14. Winner take his choice from 1 of these. Or heck I'm not picky. If the winner wants a different makita tool we can work out something: 18V LXT Li-Ion 1/2" Hammer driver-drill kit or 18V LXT Li-Ion Impact driver kit from @Miller Mod Saws

[emoji41]15. (9 @Dub11)
Custom built benchmount chainsaw vise from @Mycamaro_68

16. Stihl 015 top handle with original case AND the original manual. Saw is in fantastic shape and starts on 2nd or 3rd pull, lots of compression, runs great. I have a new chain ordered from Forester. From @dahmer on AS

[emoji41]17. (1 @GCJenks204)
Chainsaw "starter" repair kit (it's got a LOT of tools for working on saws) looks like it is geared towards Stihl saws. See pictures from Dave in this thread. A great prize from @Definitive Dave