RAFFLE: AdirondackStihl Surgery Fund. Raffle ends on Monday, April 2, 2018.

[166]

Is this the guy from the SoCal dessert? I'm bad wit names...

Yes

He's coming to the GTG here.

 

[Lightning Performance]

Yes

He's coming to the GTG here.

Can I touch your new 166?

 

[Duane(Pa)]

Let's get @Mastermind up over a hundred thousand Likes. Play along boys & girlz

 

[Mastermind]

X-ray shows a hot dog with batteries in it.

Two of em.....side by side.

 

[Mastermind]

Let's get @Mastermind up over a hundred thou Likes. Play along boys & girlz

Meh......fuk that guy.

 

[Duane(Pa)]

Sew, that's how ewe spell it???

 

[166]

Can I touch your new 166?

Ain't mine to say. But I gotta few others you can touch.

 

[Mastermind]

Ain't mine to say. But I gotta few others you can touch.

Sounds kinky.

 

[davidwyby]

Here I am guys. Apparently I missed some instructions. Sorry, no email notifications and I'm slammed at work and after lately. Gimme a few to catch up.

-David "Wymore" Byrum...

 

[Wood Chopper]

Ain't mine to say. But I gotta few others you can touch.

I’m on my wayTo pick up a couple wedges and a new chain can I touch something? [emoji23]


Sent from my iPhone using Tapatalk

 

[Duane(Pa)]

Sounds kinky.

Wait till you try to board the plane wit dat jug of "sap" Kinky aint the word for it!

 

[GCJenks204]

1) Vintage McCulloch Sharpening jig and a Homelite410 filing vise from @Mastermind

2) Mastermind ported Husqvarna 346 XP OE from @Troylee

3) Winner gets a set of their crankcases powdered by Glock37 from @Glock37

4) Makita XPH12 18V LXT Brushless hammer drill. Will include one 4.0 Ah Battery and charger. from @166

5) Port Job from @huskihl

6) New 20" Husqvarna Large Mount Bar and Square Ground chain from @dustinwilt68

7) Poulan PRO 330 from @Sleeper

8) BRAND NEW Stihl 25" 84DL LIGHT bar from @GCJenks204

9) Six Pack of 2.5 Gallon Red Armor Mix oil with shipping to the winner from @Dub11

10) Vintage John Deere saw from @Deets066

11) Custom Tuned Pipe from @spencerpaving.

12) Woods Port from @tree monkey

13) Brand new Husqvarna 372 Full Wrap handle from @TreeLife AND a set of new oem west coast spikes from @Czed

14) N.O.S. Husqvarna 262 XP top end from @lwhaples

15) Mastermind ported Dolmar PS-6100 from @Adirondackstihl

16) Chainsaw Repair Tool Set from @Definitive Dave

17) JMS Ported 064/066 from @Miller Mod Saws and @hseII

18) Timberline Sharpener from @ny15

19) A case of 12 quarts of AMSOIL Saber synthetic mix from @Wood Chopper

20) A VERY NICE Stihl 028 Super from @SOS Ridgerider

21) Brand New Performance Tools T-Handle sets in SAE, Metric, and Torx from @USMC615

22) 1 pair of work gloves, 1 pair of Oregon Braces, 1 chainsaw filing set, and 1 single person first aid kit from @ajschainsaws

23) Winner's choice of a CCC Racing 346xp NE 44.3mm pop-up performance OR race flat top piston made for us by Wiseco. Both have a 1mm chrome faced Japanese steel ring centered on the intake with patented go-fast technology and patent pending never-lose additives This offer not open to anyone who shouts "Team Stihl" at a wedding or baptism. from @Definitive Dave

24) MINTY Husqvarna 257 from @Stump Shot

25) NEW Sugi Hara Lightweight 32" 3/8 .063 Gauge in 3003 Stihl mount (D025) from @Roadfxr

26) NEW 20" Total Super Bar (TsuMura) 3/8 .050 Gauge in D009 mount from @Dolmar Junkie

27) Box of 044/440 parts, includes 12mm Stihl cylinder, It has a scratch that can be felt, but the saw ran great and had good power, aftermarket piston, oem piston wrist pin, oem bearing (I think) c clips, AV bushings,some rubber pieces, nice after market 440 tank, oem bearing spacer, oem handle, good running Hong Kong Zama carb, muffler base, oem badges, oem brake flag, ans a set of Glock37 powder coated spikes with hardware and chain catcher from @Backtroller

28) Gamn carbide sharpener with two burrs and literature from @Tpagel

29) A dozen BEAUTIFUL hand tied Trout Flies from @Adirondackstihl

30) Makita 47 Pc. Ratchet and Bit Set from @166

31) Hand forged set of draw knives, one curved and one straight, made by none other than the legendary Scotty Overkill himself! from @Scotty Overkill

32) Crank tool kit from @Mattyo

33) Kit saw of the winners choice from Hl Supply from @Gentleman

34) A case (24) of Tanaka Perfect Mix 6.4oz bottles from @PissRev

35) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (1 of 2) from @166

36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from @166

37) A Regulator (great for finding leaks) from @psuiewalsh

38) A made in USA Oregon 28" D009 mount in 3/8 .050 includes a used Stihl chain that has been converted to square ground from @psuiewalsh

39) A SWEET vintage Husqvarna labeled Windsor bar 16" 3/8 .058 60 DL from @Stump Shot

40) A BEAUTIFUL Homelite410 custom Engine Turned 3/8 .050 Gauge 84 DL Stihl bar from @Time's Standing Stihl

41) Oregon 5/32 sharpening kit, includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (1 of 2) from @166

42) Oregon 3/16 sharpening kit includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (2 of 2) from @166

43) 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from @166

44) Homelite410 filing vise from @Homelite410

45) Brand New OEM Husqvarna 576 Full Wrap Handle Kit from @Moparmyway

46) New in box 12" Stihl 3/8p .050 bar and 5x 12" 63pm chains, non safety (great combo for a MS 200 T) from @treesmith

47) New in box OEM Husqvarna 346xp ne piston and cylinder kit from @treesmith

48) Husqvarna chainsaw bag from @ajschainsaws

49) N.O.S. Husqvarna 262 XP three shoe clutch assembly from @NCFarmboy

50) Dolmar/Makita 030-132-000 49mm fits 6800I from @NCFarmboy

51) Jonsered 503-1687-01 fits 590 haven't measured but they look the same just diff suffix 01 vs 71 from @NCFarmboy

52) Husqvarna 503-1687-71 fits 55 CP from @NCFarmboy

53) Orange Gen III Two Idiots Logging XL T Shirt from @166

54) Black Gen III Two Idiots Logging XL T Shirt from @166

55) Freshened up and woods ported 034/036 hybrid with upgraded clutch drum and bearing as well as a metal mesh filter from @Canadian farm boy

56) A pair of Sip Security pants, size is 38-35" waist with 32" length from @CapitaineHaddoc

57) A nice little wood splitter axe/wall hanger with a vintage craftsman head and hickory 28” handle. My father makes them as a hobby and we wanted to donate it from @huskyboy

58) Walbro HDA 87 for a Husqvarna 262 XP from @CJ Brown

59) Brand new Oregon 18" K041 bar and two chains from @dahmer

60) N.O.S. Husqvarna 257 Cylinder kit from @NCFarmboy

61) New Husqvarna small mount bar K095 24” 3/8 .058 84 DL replaceable sprocket nose. Has a scratch here and there from storage but never used from @Greg Newman

62) Winner gets a set of their crankcases powdered by Glock37 from @PA Dan

63) New 28" .050 Gauge 91 DL Stihl Rollomatic ES bar in 3003 mount (D025) from @jacob j.

While we're waitin, @Onan18 can you just zap the claimed prizes from the list? (vs. marking them claimed) might help with efficiency.

He did back before we sent the search parties out for David. He did renumber the list though instead of just deleted 50 and 57... Messes with some of us that made our own number lists. I'll just have to remember that my 56 is now 55...

 

[Mastermind]

Wait till you try to board the plane wit dat jug of "sap" Kinky aint the word for it!

Mmmmm Sap !!!!

 

[GCJenks204]

@davidwyby

Here is the current list to chose from :

1) Vintage McCulloch Sharpening jig and a Homelite410 filing vise from @Mastermind

2) Mastermind ported Husqvarna 346 XP OE from @Troylee

3) Winner gets a set of their crankcases powdered by Glock37 from @Glock37

4) Makita XPH12 18V LXT Brushless hammer drill. Will include one 4.0 Ah Battery and charger. from @166

5) Port Job from @huskihl

6) New 20" Husqvarna Large Mount Bar and Square Ground chain from @dustinwilt68

7) Poulan PRO 330 from @Sleeper

8) BRAND NEW Stihl 25" 84DL LIGHT bar from @GCJenks204

9) Six Pack of 2.5 Gallon Red Armor Mix oil with shipping to the winner from @Dub11

10) Vintage John Deere saw from @Deets066

11) Custom Tuned Pipe from @spencerpaving.

12) Woods Port from @tree monkey

13) Brand new Husqvarna 372 Full Wrap handle from @TreeLife AND a set of new oem west coast spikes from @Czed

14) N.O.S. Husqvarna 262 XP top end from @lwhaples

15) Mastermind ported Dolmar PS-6100 from @Adirondackstihl

16) Chainsaw Repair Tool Set from @Definitive Dave

17) JMS Ported 064/066 from @Miller Mod Saws and @hseII

18) Timberline Sharpener from @ny15

19) A case of 12 quarts of AMSOIL Saber synthetic mix from @Wood Chopper

20) A VERY NICE Stihl 028 Super from @SOS Ridgerider

21) Brand New Performance Tools T-Handle sets in SAE, Metric, and Torx from @USMC615

22) 1 pair of work gloves, 1 pair of Oregon Braces, 1 chainsaw filing set, and 1 single person first aid kit from @ajschainsaws

23) Winner's choice of a CCC Racing 346xp NE 44.3mm pop-up performance OR race flat top piston made for us by Wiseco. Both have a 1mm chrome faced Japanese steel ring centered on the intake with patented go-fast technology and patent pending never-lose additives This offer not open to anyone who shouts "Team Stihl" at a wedding or baptism. from @Definitive Dave

24) MINTY Husqvarna 257 from @Stump Shot

25) NEW Sugi Hara Lightweight 32" 3/8 .063 Gauge in 3003 Stihl mount (D025) from @Roadfxr

26) NEW 20" Total Super Bar (TsuMura) 3/8 .050 Gauge in D009 mount from @Dolmar Junkie

27) Box of 044/440 parts, includes 12mm Stihl cylinder, It has a scratch that can be felt, but the saw ran great and had good power, aftermarket piston, oem piston wrist pin, oem bearing (I think) c clips, AV bushings,some rubber pieces, nice after market 440 tank, oem bearing spacer, oem handle, good running Hong Kong Zama carb, muffler base, oem badges, oem brake flag, ans a set of Glock37 powder coated spikes with hardware and chain catcher from @Backtroller

28) Gamn carbide sharpener with two burrs and literature from @Tpagel

29) A dozen BEAUTIFUL hand tied Trout Flies from @Adirondackstihl

30) Makita 47 Pc. Ratchet and Bit Set from @166

31) Hand forged set of draw knives, one curved and one straight, made by none other than the legendary Scotty Overkill himself! from @Scotty Overkill

32) Crank tool kit from @Mattyo

33) Kit saw of the winners choice from Hl Supply from @Gentleman

34) A case (24) of Tanaka Perfect Mix 6.4oz bottles from @PissRev

35) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (1 of 2) from @166

36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from @166

37) A Regulator (great for finding leaks) from @psuiewalsh

38) A made in USA Oregon 28" D009 mount in 3/8 .050 includes a used Stihl chain that has been converted to square ground from @psuiewalsh

39) A SWEET vintage Husqvarna labeled Windsor bar 16" 3/8 .058 60 DL from @Stump Shot

40) A BEAUTIFUL Homelite410 custom Engine Turned 3/8 .050 Gauge 84 DL Stihl bar from @Time's Standing Stihl

41) Oregon 5/32 sharpening kit, includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (1 of 2) from @166

42) Oregon 3/16 sharpening kit includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (2 of 2) from @166

43) 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from @166

44) Homelite410 filing vise from @Homelite410

45) Brand New OEM Husqvarna 576 Full Wrap Handle Kit from @Moparmyway

46) New in box 12" Stihl 3/8p .050 bar and 5x 12" 63pm chains, non safety (great combo for a MS 200 T) from @treesmith

47) New in box OEM Husqvarna 346xp ne piston and cylinder kit from @treesmith

48) Husqvarna chainsaw bag from @ajschainsaws

49) N.O.S. Husqvarna 262 XP three shoe clutch assembly from @NCFarmboy

50) Dolmar/Makita 030-132-000 49mm fits 6800I from @NCFarmboy

51) Jonsered 503-1687-01 fits 590 haven't measured but they look the same just diff suffix 01 vs 71 from @NCFarmboy

52) Husqvarna 503-1687-71 fits 55 CP from @NCFarmboy

53) Orange Gen III Two Idiots Logging XL T Shirt from @166

54) Black Gen III Two Idiots Logging XL T Shirt from @166

55) Freshened up and woods ported 034/036 hybrid with upgraded clutch drum and bearing as well as a metal mesh filter from @Canadian farm boy

56) A pair of Sip Security pants, size is 38-35" waist with 32" length from @CapitaineHaddoc

57) A nice little wood splitter axe/wall hanger with a vintage craftsman head and hickory 28” handle. My father makes them as a hobby and we wanted to donate it from @huskyboy

58) Walbro HDA 87 for a Husqvarna 262 XP from @CJ Brown

59) Brand new Oregon 18" K041 bar and two chains from @dahmer

60) N.O.S. Husqvarna 257 Cylinder kit from @NCFarmboy

61) New Husqvarna small mount bar K095 24” 3/8 .058 84 DL replaceable sprocket nose. Has a scratch here and there from storage but never used from @Greg Newman

62) Winner gets a set of their crankcases powdered by Glock37 from @PA Dan

63) New 28" .050 Gauge 91 DL Stihl Rollomatic ES bar in 3003 mount (D025) from @jacob j.

 

[Mastermind]

Here I am guys. Apparently I missed some instructions. Sorry, no email notifications and I'm slammed at work and after lately. Gimme a few to catch up.

-David "Wymore" Byrum...

These fellers slapped the crap outta me for nearly skipping you.

 

[Adirondackstihl]

Mmmmm Sap !!!!

Mmmmmm
It’s good in muh oatmeal

 

[CJ Brown]

These fellers slapped the crap outta me for nearly skipping you.

Everyone is excited to see these prizes handed out. It a pretty incredible raffle.

 

[davidwyby]

Just found the updated prize list, lOOking. I had no intention or expectation of winning anything, I'm a bit floored. Not getting emails from either forum. Work is slammed (I run my grandfather's machine and welding shop) and I've been doing tree work constantly after work to make $ for NY GTG.

Just had a thought, bit late, but if you guys would like, add a prize to the list : cylinder base machining from me.

 

[GCJenks204]

Just found the updated prize list, lOOking. I had no intention or expectation of winning anything, I'm a bit floored. Not getting emails from either forum. Work is slammed (I run my grandfather's machine and welding shop) and I've been doing tree work constantly after work to make $ for NY GTG.

Just had a thought, bit late, but if you guys would like, add a prize to the list : cylinder base machining from me.

I sure would be tempted by 4) Makita XPH12 18V LXT Brushless hammer drill. Will include one 4.0 Ah Battery and charger. from @166 if I were you. You can pick it up in person and don't have to worry about flying with a gas appliance...

 

[davidwyby]

So...can I ask for choosing help? I know I want a ported saw, but have one of mine ported, or get one...? Oi...I never eve paid attention to the list before, haha. I was just trying to help a feller out.