RAFFLE: AdirondackStihl Surgery Fund. Raffle ends on Monday, April 2, 2018.

[tree monkey]

29 please, I think it was the best prize of them all

 

[Mastermind]

We need JRCAT front and center !!!!!!

#60 .... @jrcat
#61 .... @BonScott46
#62 .... @CapitaineHaddoc
#63 .... @Leerod83
#64 .... @cuinrearview
#65 .... @Only the Tony
#66 .... @dieselfitter


Here is what's left of the prizes (original numbers).


36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from@166

37) A Regulator (great for finding leaks) from @psuiewalsh

39) A SWEET vintage Husqvarna labeledWindsor bar 16" 3/8 .058 60 DL from @Stump Shot

41) Oregon 5/32 sharpening kit, includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (1 of 2) from @166

42) Oregon 3/16 sharpening kit includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (2 of 2) from @166

43) 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from@166

52) Jonsered 503-1687-01 fits 590 haven't measured but they look the same just diffsuffix 01 vs 71 from @NCFarmboy

63) New Husqvarna small mount bar K09524” 3/8 .058 84 DL replaceable sprocket nose. Has a scratch here and there from storage but never used from @Greg Newman

64) 12" Diamond Wheel for a Cut-Off Saw? MSRP Value $211.40 from @166

 

[hseII]

We need JRCAT front and center !!!!!!

#60 .... @jrcat
#61 .... @BonScott46
#62 .... @CapitaineHaddoc
#63 .... @Leerod83
#64 .... @cuinrearview
#65 .... @Only the Tony
#66 .... @dieselfitter


Here is what's left of the prizes (original numbers).


36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from@166

37) A Regulator (great for finding leaks) from @psuiewalsh

39) A SWEET vintage Husqvarna labeledWindsor bar 16" 3/8 .058 60 DL from @Stump Shot

41) Oregon 5/32 sharpening kit, includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (1 of 2) from @166

42) Oregon 3/16 sharpening kit includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (2 of 2) from @166

43) 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from@166

52) Jonsered 503-1687-01 fits 590 haven't measured but they look the same just diffsuffix 01 vs 71 from @NCFarmboy

63) New Husqvarna small mount bar K09524” 3/8 .058 84 DL replaceable sprocket nose. Has a scratch here and there from storage but never used from @Greg Newman

64) 12" Diamond Wheel for a Cut-Off Saw? MSRP Value $211.40 from @166

Offline Scented.

 

[Mastermind]

Offline Scented.

Me Too !!!!

 

[Mastermind]

BonScott get in here. !!!!!

#61 .... @BonScott46
#62 .... @CapitaineHaddoc
#63 .... @Leerod83
#64 .... @cuinrearview
#65 .... @Only the Tony
#66 .... @dieselfitter


Here is what's left of the prizes (original numbers).


36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from@166

37) A Regulator (great for finding leaks) from @psuiewalsh

41) Oregon 5/32 sharpening kit, includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (1 of 2) from @166

42) Oregon 3/16 sharpening kit includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (2 of 2) from @166

43) 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from@166

52) Jonsered 503-1687-01 fits 590 haven't measured but they look the same just diffsuffix 01 vs 71 from @NCFarmboy

63) New Husqvarna small mount bar K09524” 3/8 .058 84 DL replaceable sprocket nose. Has a scratch here and there from storage but never used from @Greg Newman

64) 12" Diamond Wheel for a Cut-Off Saw? MSRP Value $211.40 from @166

 

[BonScott46]

Give me a minute I was going to take the Windsor bar.

 

[Mastermind]

Give me a minute I was going to take the Windsor bar.

Take your time sir.

 

[BonScott46]

#43 please.

 

[Mastermind]

That 24" small mount Husky bar would be mine if I was up. Yeppers.

 

[Mastermind]

#43 please.

Done.

 

[Mastermind]

Capt.......Oh Capt !!!!!!

#62 .... @CapitaineHaddoc
#63 .... @Leerod83
#64 .... @cuinrearview
#65 .... @Only the Tony
#66 .... @dieselfitter

Here is what's left of the prizes (original numbers).

36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from@166

37) A Regulator (great for finding leaks) from @psuiewalsh

41) Oregon 5/32 sharpening kit, includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (1 of 2) from @166

42) Oregon 3/16 sharpening kit includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (2 of 2) from @166

52) Jonsered 503-1687-01 fits 590 haven't measured but they look the same just diffsuffix 01 vs 71 from @NCFarmboy

63) New Husqvarna small mount bar K09524” 3/8 .058 84 DL replaceable sprocket nose. Has a scratch here and there from storage but never used from @Greg Newman

64) 12" Diamond Wheel for a Cut-Off Saw? MSRP Value $211.40 from @166

 

[Lightning Performance]

Must be that time continuum thing.

 

[BonScott46]

That 24" small mount Husky bar would be mine if I was up. Yeppers.

Somebody would probably try and get me commited if I broke out a small mount Husky with a 24 inch bar here.

 

[Mastermind]

Somebody would probably try and get me commited if I broke out a small mount Husky with a 24 inch bar here.

I've got some small mount saws that would just snicker at 24" buried in hardwood.

 

[Wilhelm]

Must be that time continuum thing.

Well past 8PM in Europe, and tomorrow is a work day.

Yeah, it's that time continuum thing!

 

[Mastermind]

Well past 8PM in Europe, and tomorrow is a work day.

Yeah, it's that time continuum thing!

We've just about got this thing wrapped up. No hurry at all to me.

 

[Lightning Performance]

We've just about got this thing wrapped up. No hurry at all to me.

Should have put down your spinny thingy and come visit here in the east, sometime, ya know, wth ... That escalated quickly.
Back to work for me.

 

[Cut4fun]

K041 small mount like husky 24" 84dl on a poulan 60cc right now and ran it buried in a dry ash log for chits. No problem.

 

[Philbert]

29 please, I think it was the best prize of them all

You gonna port those?

Philbert

 

[166]

A little heads up on the raffle prizes. This upcoming week is going to be busy. Then the following week I'll be at Makita USA in Georgia for a few days.

So depending on how fast the prizes are picked there may be a little delay on getting them shipped out.

Bump

Will try to send more items on Friday or Monday.

If you haven't already send me a PM with what you won and the address.