High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

RAFFLE: AdirondackStihl Surgery Fund. Raffle ends on Monday, April 2, 2018.

Mastermind

Chief Cat Herder
Staff member
Yearly GoldMember
Local time
7:01 PM
User ID
4
Joined
Dec 3, 2015
Messages
50,768
Reaction score
336,083
Location
Banner Springs Tennessee
Country flag
Here is the updated list of prizes (original numbers).

4) Makita XPH12 18V LXT Brushless hammer drill. Will include one 4.0 Ah Battery and charger. from@166

6) New 20" Husqvarna Large Mount Bar and Square Ground chain from @dustinwilt68

7) Poulan PRO 330 from @Sleeper

8) BRAND NEW Stihl 25" 84DL LIGHT bar from @GCJenks204

9) Six Pack of 2.5 Gallon Red Armor Mix oil with shipping to the winnerfrom @Dub11

10) Vintage John Deere saw from @Deets066

13) Brand new Husqvarna 372 Full Wrap handle from @TreeLife AND a set of new oem west coast spikes from @Czed

14) N.O.S. Husqvarna 262 XP top end from @lwhaples

20) A VERY NICE Stihl 028 Super from@SOS Ridgerider

21) Brand New Performance Tools T-Handle sets in SAE, Metric, and Torx from@USMC615

22) 1 pair of work gloves, 1 pair of Oregon Braces, 1 chainsaw filing set, and 1 single person first aid kit from @ajschainsaws

25) NEW Sugi Hara Lightweight 32" 3/8 .063 Gauge in 3003 Stihl mount (D025) from @Roadfxr

26) NEW 20" Total Super Bar (TsuMura) 3/8 .050 Gauge in D009 mount from @Dolmar Junkie

27) Box of 044/440 parts, includes 12mm Stihl cylinder, It has a scratch that can be felt, but the saw ran great andhad good power, aftermarket piston, oem piston wrist pin, oem bearing (I think) c clips, AV bushings,some rubber pieces, nice after market 440 tank, oem bearing spacer, oem handle, good running Hong KongZama carb,muffler base, oem badges, oem brake flag, ans a set of Glock37 powder coated spikes with hardware and chain catcher from @Backtroller

28) Gamn carbide sharpener with two burrs and literature from @Tpagel

29) A dozen BEAUTIFUL hand tied Trout Flies from @Adirondackstihl

30) Makita 47 Pc. Ratchet and Bit Set from @166

31) Hand forged set of draw knives, one curved and one straight, made by none other than the legendary Scotty Overkill himself! from @Scotty Overkill

33) Kit saw of the winners choice from Hl Supply from @Gentleman

35) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (1 of 2) from @166

36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from @166

37) A Regulator (great for finding leaks) from @psuiewalsh

38) A made in USA Oregon28" D009mount in 3/8 .050 includes a used Stihl chain that has been converted to square ground from @psuiewalsh

39) A SWEET vintage Husqvarna labeled Windsor bar 16" 3/8 .058 60 DL from @Stump Shot

41) Oregon 5/32 sharpening kit, includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (1 of 2) from @166

42) Oregon 3/16 sharpening kit includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (2 of 2) from @166

43) 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from @166

46) New in box 12" Stihl 3/8p .050 bar and 5x 12" 63pm chains, non safety (great combo for a MS 200 T) from @treesmith

48) Husqvarna chainsaw bag from @ajschainsaws

49) N.O.S. Husqvarna 262 XP three shoe clutch assembly

52) Jonsered 503-1687-01 fits 590 haven't measured but they look the same just diff suffix 01 vs 71 from @NCFarmboy

53) Husqvarna 503-1687-71 fits 55 CP from @NCFarmboy

54) Orange Gen III Two Idiots Logging XL T Shirt from @166

55) Black Gen III Two Idiots Logging XL T Shirt from @166

58) A pair of Sip Security pants, size is 38-35" waist with 32" length from @CapitaineHaddoc

59) A nice little wood splitter axe/wall hanger with a vintage craftsman head and hickory 28” handle. My father makes them as a hobby and we wanted to donate it :) from @huskyboy

61) Brand new Oregon 18" K041 bar and two chains from @dahmer

62) N.O.S. Husqvarna 257 Cylinder kit from @NCFarmboy

63) New Husqvarna small mount bar K095 24” 3/8 .058 84 DL replaceable sprocket nose. Has a scratch here and there from storage but never used from @Greg Newman

64) Winner gets a set of their crankcases powdered by Glock37 from @PA Dan

65) New 28" .050 Gauge 91 DL Stihl Rollomatic ES bar in 3003mount (D025) from @jacob j.

The prizes that have been selected are:

1. 166
2. 394
3. 6100
4. 346
5. 257
6. Timberline Sharpener
7. Crank tool kit from
8. 24 Hour time passed/ selection held for future
9. Custom Tuned Pipe from
10. Dolmar/Makita 030-132-000 49mm fits 6800I
11. Freshened up and woods ported 034/036 hybrid with upgraded clutch drum and bearing as well as a metal mesh filter
12. JMS Ported 064/066
13. Woods Port Job by Tree Monkey
14. Woods Port by Fat Finger Saws LLC (Huskihl)
15. Chainsaw Repair Tool Set from @Definitive Dave
16. Vintage McCulloch Sharpening jig and a Homelite410 filing vise from @Mastermind
17. Winner's choice of a CCC Racing 346xp NE 44.3mm pop-up performance OR race flat top piston made for us by Wiseco. Both have a 1mm chrome faced Japanese steel ring centered on the intake with patented go-fast technology and patent pending never-lose additives :)This offer not open to anyone who shouts "Team Stihl" at a wedding or baptism. from @Definitive Dave
18. A case of 12 quarts of AMSOIL Saber synthetic mix from @Wood Chopper
19. New in box OEM Husqvarna 346xp ne piston and cylinder kit from @treesmith
20. Homelite410 filing vise from @Homelite410
21. A case (24) of Tanaka Perfect Mix 6.4oz bottles from @PissRev
22. Winner gets a set of their crankcases powdered by Glock37 from@Glock37
23. Brand New OEM Husqvarna 576 Full Wrap Handle Kit from @Moparmyway
24. Walbro HDA 87 for a Husqvarna 262 XP from @CJ Brown
25. A BEAUTIFUL Homelite410 custom Engine Turned 3/8 .050 Gauge 84 DL Stihl bar from @Time's Standing Stihl:eek:
 

Yukon Stihl

Pinnacle OPE Member
Local time
5:01 PM
User ID
508
Joined
Jan 11, 2016
Messages
1,100
Reaction score
4,069
Location
Great White North
Country flag
Hi All
Good thing i checked in tonight...
Otherwise i would have held up the works
If i read things correctly i am up and i will go for #33. I have been wanting to try out a box o saw.
Get well soon AdirondackStihl,hope you are all pussed out now.
And a Big Thank You to all that have worked hard to get this fundraiser going.
Thomas
 

GCJenks204

"Special Buns"
Local time
7:01 PM
User ID
367
Joined
Dec 31, 2015
Messages
15,106
Reaction score
95,612
Location
Winnipeg, MB
Country flag
Up Next...


#29..... @Lightning Performance

#30...... @Troylee

#31...... @Need2Saw


I believe Jeremy has some picks from Ken so we just need one of them to wake up and make the selection. Much better day guys, thanks for keeping it moving.



Here is the updated list of prizes (original numbers).

4) Makita XPH12 18V LXT Brushless hammer drill. Will include one 4.0 Ah Battery and charger. from@166

6) New 20" Husqvarna Large Mount Bar and Square Ground chain from @dustinwilt68

7) Poulan PRO 330 from @Sleeper

8) BRAND NEW Stihl 25" 84DL LIGHT bar from @GCJenks204

9) Six Pack of 2.5 Gallon Red Armor Mix oil with shipping to the winnerfrom @Dub11

10) Vintage John Deere saw from @Deets066

13) Brand new Husqvarna 372 Full Wrap handle from @TreeLife AND a set of new oem west coast spikes from @Czed

14) N.O.S. Husqvarna 262 XP top end from @lwhaples

20) A VERY NICE Stihl 028 Super from@SOS Ridgerider

21) Brand New Performance Tools T-Handle sets in SAE, Metric, and Torx from@USMC615

22) 1 pair of work gloves, 1 pair of Oregon Braces, 1 chainsaw filing set, and 1 single person first aid kit from @ajschainsaws

25) NEW Sugi Hara Lightweight 32" 3/8 .063 Gauge in 3003 Stihl mount (D025) from @Roadfxr

26) NEW 20" Total Super Bar (TsuMura) 3/8 .050 Gauge in D009 mount from @Dolmar Junkie

27) Box of 044/440 parts, includes 12mm Stihl cylinder, It has a scratch that can be felt, but the saw ran great andhad good power, aftermarket piston, oem piston wrist pin, oem bearing (I think) c clips, AV bushings,some rubber pieces, nice after market 440 tank, oem bearing spacer, oem handle, good running Hong KongZama carb,muffler base, oem badges, oem brake flag, ans a set of Glock37 powder coated spikes with hardware and chain catcher from @Backtroller

28) Gamn carbide sharpener with two burrs and literature from @Tpagel

29) A dozen BEAUTIFUL hand tied Trout Flies from @Adirondackstihl

30) Makita 47 Pc. Ratchet and Bit Set from @166





35) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (1 of 2) from @166

36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from @166

37) A Regulator (great for finding leaks) from @psuiewalsh

38) A made in USA Oregon28" D009mount in 3/8 .050 includes a used Stihl chain that has been converted to square ground from @psuiewalsh

39) A SWEET vintage Husqvarna labeled Windsor bar 16" 3/8 .058 60 DL from @Stump Shot

41) Oregon 5/32 sharpening kit, includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (1 of 2) from @166

42) Oregon 3/16 sharpening kit includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (2 of 2) from @166

43) 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from @166



48) Husqvarna chainsaw bag from @ajschainsaws

49) N.O.S. Husqvarna 262 XP three shoe clutch assembly

52) Jonsered 503-1687-01 fits 590 haven't measured but they look the same just diff suffix 01 vs 71 from @NCFarmboy

53) Husqvarna 503-1687-71 fits 55 CP from @NCFarmboy

54) Orange Gen III Two Idiots Logging XL T Shirt from @166

55) Black Gen III Two Idiots Logging XL T Shirt from @166

58) A pair of Sip Security pants, size is 38-35" waist with 32" length from @CapitaineHaddoc

59) A nice little wood splitter axe/wall hanger with a vintage craftsman head and hickory 28” handle. My father makes them as a hobby and we wanted to donate it :) from @huskyboy

61) Brand new Oregon 18" K041 bar and two chains from @dahmer

62) N.O.S. Husqvarna 257 Cylinder kit from @NCFarmboy

63) New Husqvarna small mount bar K095 24” 3/8 .058 84 DL replaceable sprocket nose. Has a scratch here and there from storage but never used from @Greg Newman

64) Winner gets a set of their crankcases powdered by Glock37 from @PA Dan

65) New 28" .050 Gauge 91 DL Stihl Rollomatic ES bar in 3003mount (D025) from @jacob j.

The prizes that have been selected are:

1. 166
2. 394
3. 6100
4. 346
5. 257
6. Timberline Sharpener
7. Crank tool kit from
8. 24 Hour time passed/ selection held for future
9. Custom Tuned Pipe from
10. Dolmar/Makita 030-132-000 49mm fits 6800I
11. Freshened up and woods ported 034/036 hybrid with upgraded clutch drum and bearing as well as a metal mesh filter
12. JMS Ported 064/066
13. Woods Port Job by Tree Monkey
14. Woods Port by Fat Finger Saws LLC (Huskihl)
15. Chainsaw Repair Tool Set from @Definitive Dave
16. Vintage McCulloch Sharpening jig and a Homelite410 filing vise from @Mastermind
17. Winner's choice of a CCC Racing 346xp NE 44.3mm pop-up performance OR race flat top piston made for us by Wiseco. Both have a 1mm chrome faced Japanese steel ring centered on the intake with patented go-fast technology and patent pending never-lose additives :)This offer not open to anyone who shouts "Team Stihl" at a wedding or baptism. from @Definitive Dave
18. A case of 12 quarts of AMSOIL Saber synthetic mix from @Wood Chopper
19. New in box OEM Husqvarna 346xp ne piston and cylinder kit from @treesmith
20. Homelite410 filing vise from @Homelite410
21. A case (24) of Tanaka Perfect Mix 6.4oz bottles from @PissRev
22. Winner gets a set of their crankcases powdered by Glock37 from@Glock37
23. Brand New OEM Husqvarna 576 Full Wrap Handle Kit from @Moparmyway
24. Walbro HDA 87 for a Husqvarna 262 XP from @CJ Brown
25. A BEAUTIFUL Homelite410 custom Engine Turned 3/8 .050 Gauge 84 DL Stihl bar from @Time's Standing Stihl:eek:
26. Hand forged set of draw knives, one curved and one straight, made by none other than the legendary Scotty Overkill himself! from @Scotty Overkill
27. New in box 12" Stihl 3/8p .050 bar and 5x 12" 63pm chains, non safety (great combo for a MS 200 T) from @treesmith
28. Kit saw of the winners choice from Hl Supply from @Gentleman
 

Scotty Overkill

Serial Tree Killer
Local time
8:01 PM
User ID
1414
Joined
Jun 14, 2016
Messages
846
Reaction score
5,471
Location
central PA
Country flag
Sorry for the hold up gents, I just got in from the Faraday cage of a shop.

I'll take the draw knifes, #31. Scotty I'll PM you my address and I thank for you for your generosity.
I was hoping my name would get picked in the contest, I was gonna pick them for myself......LMAO!

Hey, glad you won them, brother, it was my pleasure to help out with this raffle!! Jer is a great dude, as are all of you guys here and over at our FHC forums. I'm glad to be a part of both of them!! I'll box them up this evening and send them out tomorrow in the AM.

Now, onto the next set......got my big anvil ready to slam, what shall we make for the next raffle??

20180313_212938.jpg
 

Onan18

OPE Sponsor
GoldMember
Local time
8:01 PM
User ID
344
Joined
Dec 30, 2015
Messages
4,513
Reaction score
25,106
Location
Georgia
Country flag
I was hoping my name would get picked in the contest, I was gonna pick them for myself......LMAO!

Hey, glad you won them, brother, it was my pleasure to help out with this raffle!! Jer is a great dude, as are all of you guys here and over at our FHC forums. I'm glad to be a part of both of them!! I'll box them up this evening and send them out tomorrow in the AM.

Now, onto the next set......got my big anvil ready to slam, what shall we make for the next raffle??

View attachment 119361


Hatchet. :babeando:
 

Deets066

AKA Deetsey
Local time
8:01 PM
User ID
290
Joined
Dec 28, 2015
Messages
15,442
Reaction score
73,564
Location
Illinois
Country flag
I was hoping my name would get picked in the contest, I was gonna pick them for myself......LMAO!

Hey, glad you won them, brother, it was my pleasure to help out with this raffle!! Jer is a great dude, as are all of you guys here and over at our FHC forums. I'm glad to be a part of both of them!! I'll box them up this evening and send them out tomorrow in the AM.

Now, onto the next set......got my big anvil ready to slam, what shall we make for the next raffle??

View attachment 119361
Have you ever tried making a knife out of chainsaw chain. I've seen a few pics and they look pretty sweet.
 

Troylee

Super OPE Member
Local time
7:01 PM
User ID
467
Joined
Jan 9, 2016
Messages
65
Reaction score
360
Location
Cooksville, IL
Would the 55cp piston (prize #53) be a drop in for my 55cp that Brad Snelling built me? He cut windows into a piston from another saw for my build.
 

Deets066

AKA Deetsey
Local time
8:01 PM
User ID
290
Joined
Dec 28, 2015
Messages
15,442
Reaction score
73,564
Location
Illinois
Country flag
Would the 55cp piston (prize #53) be a drop in for my 55cp that Brad Snelling built me? He cut windows into a piston from another saw for my build.
If your piston is from a different saw. The jug could machined to only fit that piston now. Brad would have to chime in on that one
 
Top