Raffle 262 builds

[paragonbuilder]

@Sleeper
She’s ready for fuel!

 

[RI Chevy]

Should make a real nice runner Dan. [emoji106]
Great job on both of these saws.

 

[malk315]

@Sleeper
She’s ready for fuel!

It's the feeling you get when the saw you are working on is done that keeps me interested in this. Best feeling when saw goes together and she runs like a champ.


Sent from my XT1585 using Tapatalk

 

[paragonbuilder]

Sounds great just popping it over. Gotta go grocery shopping now

 

[Sleeper]

Awesome! Barely can wait for the video of it cutting.

Want to say thanks, again, Dan!

Once I'm back up and cutting wood again after the soon to be done surgeries, she'll be brought out and fired up for sending chips flying.

We've been having too many surgeries lately. Mom, brother, now me. All in about a 10 month span. Seems more health issues nowadays compared to back then. But again, back then, they didn't even know how to fix eye issues if it wasn't a cataract or something simple.

So far, insurance has been kind and helpful, so that is good.

 

[Redfin]

Makes sense!
From looking at the plug and knowing where I had it tuned, I don’t think it was lean at all.
I was running klotz benol. Great lube but burns super dirty! I’d bet if I had Amsoil in there wash would be barely perceptible at 1-1/2 tanks.

The tune on that saw was spot on when I ran it.

 

[XP_Slinger]

Well I was hoping today... but im very THOROUGH...

Fixed it for ya

 

[paragonbuilder]

Here you go Kyle. Carb was dry. First heat cycle. Obviously it needs tuned yet.

 

[RI Chevy]

Sounds good Dan.

 

[paragonbuilder]

Sounds good Dan.

Thanks Jeff, feels snappy like the other one. I like it!

 

[malk315]

Sounds throaty on the video. Hope it pulls half as good as it sounds!

Sent from my XT1585 using Tapatalk

 

[Sleeper]

I like that. Sounds good. Should be nice under a load. Nice little pop to the exhaust note. Makes me think of a two stroke dirt bike.

Had to log on this morning to see if this video was up before I left for work.

 

[RI Chevy]

Those 262 XPs are nice. Dan does good things to them too. [emoji106]

 

[huskyboy]

Those 262 XPs are nice. Dan does good things to them too. [emoji106]

I oughta bring my 562 for you to NY. With few mild mods it hangs with a stock 461. We seem to be converting you Jeff... lol

 

[RI Chevy]

Well.... I said they are nice. But I don't own one yet. Lol
If I ever come across a clean one, I wouldn't hesitate to grab one. Price has to be right too.

I don't want to ruffle feathers, but you all know what I am all about. [emoji106] Lol

 

[huskyboy]

Well.... I said they are nice. But I don't own one yet. Lol
If I ever come across a clean one, I wouldn't hesitate to grab one. Price has to be right too.

I don't want to ruffle feathers, but you all know what I am all about. [emoji106] Lol

If I were you I’d pick up a nice 268xp/272xp with the hd filter. Last one I worked on impressed me. Rugged design, good hdfilter setup and power...I couldn’t tell a difference stock vs stock with a 372 other than it has more torque.

 

[XP_Slinger]

What kind of muffler mod are you doing on these Dan? I cut the baffle out of mine which opened up the outlet to full size under the deflector.

 

[huskyboy]

What kind of muffler mod are you doing on these Dan? I cut the baffle out of mine which opened up the outlet to full size under the deflector.

That’s gotta be like 85-90% of exhaust port opening right?

 

[RI Chevy]

If I were you I’d pick up a nice 268xp/272xp with the hd filter. Last one I worked on impressed me. Rugged design, good hdfilter setup and power...I couldn’t tell a difference stock vs stock with a 372 other than it has more torque.

But... But.... I got a 026, 261, 360, 460, 660. Don't need much else. Lol

 

[huskyboy]

268xp ported by Al would fit in there . I think he likes the 2 series husky.