High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

Predator 212 no start

f15032

New OPE Member
Local time
6:03 PM
User ID
35949
Joined
Apr 8, 2026
Messages
3
Reaction score
0
Location
United States
I have a predator 212 on a tiller. I went to use it after sitting this winter. It wont even try to start. I took the carb off cleaned it and checked for spark. It has spark and is getting fuel through the carb still nothing. I went ahead and put a new carb on it still the same. I sprayed a little starting fluid in the breather to see of it would try off of it. Still nothing wont even try. The oil is full the switch is on and the low oil sensor is plugged in. My next thing to try is put a compression tester on it. Im just wondering what else it could be. When Im pulling the pull cord I can hear a almost metal sound In the cover. Any help is appreciated
 

Clarkbug

Well-Known OPE Member
Local time
7:03 PM
User ID
25017
Joined
Sep 19, 2022
Messages
97
Reaction score
106
Location
Northeast
Country flag
Can you check the flywheel? Wondering if your key isn't there anymore and so your timing is off?

If you pull the valve cover are your valves opening and closing as you pull it over?
 

mbret2004

Well-Known OPE Member
Local time
7:03 PM
User ID
15540
Joined
Jan 28, 2021
Messages
17
Reaction score
22
Location
NEK, Vermont
Country flag
Did you leave fuel in it all winter? If so, drain it and fill with fresh gas. You might want to open the carb and clean it also. Good luck.
 

f15032

New OPE Member
Local time
6:03 PM
User ID
35949
Joined
Apr 8, 2026
Messages
3
Reaction score
0
Location
United States
I disconnected the sensor and tried it didnt change anything. I did notice the pull role isnt wanting isnt wanting to go back in very well. Thats a new thing it never did that before. Also the metal sound is getting louder when you pull it. Next thing is to pull the cover and look at the flywheel key.
 

Clarkbug

Well-Known OPE Member
Local time
7:03 PM
User ID
25017
Joined
Sep 19, 2022
Messages
97
Reaction score
106
Location
Northeast
Country flag
I disconnected the sensor and tried it didnt change anything. I did notice the pull role isnt wanting isnt wanting to go back in very well. Thats a new thing it never did that before. Also the metal sound is getting louder when you pull it. Next thing is to pull the cover and look at the flywheel key.
Sounds like there could be something interfering with the recoil and your flywheel interface. If the flywheel got loose and sheared the key, that could explain a bunch of your issues all at once.
 
Top