Post up your ported cylinder Artwork

[Woodwackr]

Only takes a few minutes on the lathe

Id love to get one and learn how to use it. But, I’ve run out of shop space for something with that big a footprint…have tried to figure out a way but gave up. Besides, you guys are out there so all I have to do is send the saw and a check…problem solved.
Steve got my 372 done way faster than expected…currently on a truck, heading back

 

[Red97]

Still playing with 50cc stuffs...

 

[Woodwackr]

Still playing with 50cc stuffs...
View attachment 451539

Looks like 52cc now

 

[farminkarman]

346xp 42mm

 

[Mastermind]

 

[MustangMike]

What saw is that jug from Randy? Nice work!

Also, referring to previous conversations, do fingers increase case capacity? In my mind they would seem to, but I may be wrong.

 

[Duane(Pa)]

View attachment 453009View attachment 453010View attachment 453011View attachment 453012View attachment 453013

QTLA

 

[Mastermind]

What saw is that jug from Randy? Nice work!

Also, referring to previous conversations, do fingers increase case capacity? In my mind they would seem to, but I may be wrong.

I'm sure they would. 3120XP

 

[Mastermind]

QTLA

I haven't heard that in awhile.

 

[MustangMike]

Keep us posted on how it runs.

 

[Mastermind]

Keep us posted on how it runs.

@Glock37

 

[Glock37]

I will

 

[huskihl]

Slackers

David’s 461

 

[farminkarman]

Slackers

David’s 461

View attachment 464648View attachment 464649View attachment 464650View attachment 464651View attachment 464652

Slacking for sure. I haven’t ported a saw since March.

 

[pbillyi69]

i dont have enough time to try porting a saw......i pay the ones that are good at it.

 

[huskihl]

i dont have enough time to try porting a saw......i pay the ones that are good at it.

Don’t feel bad, when you do it for a living, that’s all you have time for…

 

[Mastermind]

Don’t feel bad, when you do it for a living, that’s all you have time for…

Amen.

 

[pbillyi69]

im sure it gets old. i am sure glad that there are good porters like you and the others on this site. not to mention that y'all are honest and generous with your knowledge. its truely something that is lacking in our society now. thank you to all of you pros on here.

 

[David Young]

There are porters that I admire and can ask questions or bounce idea off.

then on Facebook and youtube every jack ass with a Dremel is an expert porter. I can only imagine the amount of people getting ripped off that we never know about. If they are using largely Chinese aftermarket parts, that in it self is a red flag.

I will say this, in about 20 years on this scene there are very few professional porters that are honest, and do good work for the long haul.
From what I have seen the Gents on this page I would feel comfortable have work on my saws and I would even recommend to others.
Cheers fellas!!!

 

[Mastermind]

There are porters that I admire and can ask questions or bounce idea off.

then on Facebook and youtube every jack ass with a Dremel is an expert porter. I can only imagine the amount of people getting ripped off that we never know about. If they are using largely Chinese aftermarket parts, that in it self is a red flag.

I will say this, in about 20 years on this scene there are very few professional porters that are honest, and do good work for the long haul.
From what I have seen the Gents on this page I would feel comfortable have work on my saws and I would even recommend to others.
Cheers fellas!!!

Speaking of Dremel....

My feet hurt. Sometimes, they hurt bad. now....WTF has this got to do with a Dremel?

Welp.....I use a Foredom.

But wait.....I was talking about Dremel. LOL

Here's the deal. I've been using a foot pedal for a long time. Holding it down has caused me to have tendonitis in my Achilles tendon. Plus.....I have problems with the bottoms of my feet hurting. So......I found a new in the box Dremel desktop control that is rated for 5 amps. My Foredom has a 1.7 amp draw.. Are you picking up what I'm putting down?