Post up your ported cylinder Artwork

[MustangMike]

Yea, looks great, but was that stolen and not recovered? If so, my bad, I'm sorry!

If you ran it first, tell us about it.

 

[Wisconsin Welder]

It run so good, it upped and run off

LMAO

Yeah it ran real good Mike, and it did get stolen, but that was also the only saw that size I had ever had any real time with, so it's relative, I thought it ran liked raped ape.

I have about 1/2 gallon through my 462 now and that thing is just great, I started a 046 project a couple days ago, it'll be interesting
(for me at least) to see where I can get it to end up.

 

[MustangMike]

Good luck with the 046 project. Is it a D jug or a Hemi?

IMO, port timing on 046/460 jugs seems to be all over the place, and there are often good gains to be had porting them and giving them a timing advance.

 

[P.M.P.]

 

[David Young]

View attachment 196288

Looks good. You do the uppers and intake yet?

 

[P.M.P.]

Looks good. You do the uppers and intake yet?

Thanks
Leaving the uppers don't have a right angle to mess with them. I was able to get some emery at them was all. Only did a little cleaning on the intake got the ridges off .

 

[huskyboy]

Thanks
Leaving the uppers don't have a right angle to mess with them. I was able to get some emery at them was all. Only did a little cleaning on the intake got the ridges off .

362xp cylinder? You gonna lower the wall a bit to unshroud the lowers?

 

[P.M.P.]

362xp cylinder? You gonna lower the wall a bit to unshroud the lowers?

2163 I lowered it a little doesn't show in the pic here though. I have since set it aside but the jug is finished. Need to get it together just haven't gotten to it yet.

 

[huskyboy]

2163 I lowered it a little doesn't show in the pic here though. I have since set it aside but the jug is finished. Need to get it together just haven't gotten to it yet.

I’ve always wanted to mess with one of those just out of curiosity. The only one of the 372 chassis with dual ports instead of quad other than a 372 xtorq. Even the 365 open port is quad.

 

[huskyboy]

Posted side by side to study them. Just looks like a smaller bore 372 50mm, but with the secondary transfers deleted. Hmm. Interesting. Is the piston on a 362/2163 similar to the 48mm and 50mm oe cylinders?

 

[David Young]

View attachment 196453View attachment 196456Posted side by side to study them. Just looks like a smaller bore 372 50mm, but with the secondary transfers deleted. Hmm. Interesting. Is the piston on a 362/2163 similar to the 48mm and 50mm oe cylinders?

More like a 385 piston. Single ring

 

[huskyboy]

More like a 385 piston. Single ring

Interesting, so it’s not full circle piston then.

 

[Chainsaw Jim]

Octo-port

 

[qurotro]

Interesting, so it’s not full circle piston then.

362xp piston from my old phone.

 

[moparnut88]

Octo-port

View attachment 196586

That looks nice! What is that?

Sent from my SM-N950U using Tapatalk

 

[Chainsaw Jim]

That looks nice! What is that?

Sent from my SM-N950U using Tapatalk

It's this new thing that likes its alcohol and pipe.

 

[Bigmac]

View attachment 196034

Looking at everyone else's stuff I'm guessing I went a little big on the exhaust here. This was the first one I did, the 044 that got stolen.

That sucks! I recently had my 90° 182 stolen from my truck...went fishing and the truck was at home, not locked, my fault, but he stole several things and was even caught on camera, the worse part is he dropped his phone in my rig and they still have nothing!
Morning the loss! Lol Kid probably sold it for nothing or even knew what it was!!

 

[Nutball]

They're dentist tools obviously, must be worth a lot. You should at least get to sell his phone, if they don't find him, as compensation.

 

[Lightning Performance]

That sucks! I recently had my 90° 182 stolen from my truck...went fishing and the truck was at home, not locked, my fault, but he stole several things and was even caught on camera, the worse part is he dropped his phone in my rig and they still have nothing! View attachment 196705
Morning the loss! Lol Kid probably sold it for nothing or even knew what it was!!

That's pure BS. They have other things happening to let these fools continue. Been down this road of stolen tools and phones in the work truck. He is a rat who informs to the popo. Nothing worse than a rat. Plus they get bold and tend to return to an easy pick. Leave them your high watt shinny copper pipe in a bucket
That should be a funny porch cam video.

 

[CR888]

Having your porting tools stole is sole destroying, your right the dumb thief wouldn't know what they were & probably sold them for pennies. Having footage & his phone & the cops doing nothing is disappointing! Its not your 'fault' they got stolen. I'd be going through his phone contacts & maybe when you find 'mum' give her a call & let her know what her son does in his spare time.