Ronie
Here For The Long Haul!
I had some time today so I decided I would get a little practice porting. So far I've set the squish to .020, opened up the lower transfers, took the flange at the lower transfers down level with the base, opened up the exhaust to 68% of the bore size and set the exhaust timing to 100. The numbers I'm going to use unless someone has a better suggestion are, exhaust 100, intake 80 and transfers 120. They were given to me for a 372. It's going to be running a short bar, 18" or 20" and all I cut is hard wood. Do the numbers sound like they would work for a 365? The pics are what I've done so far. If you see something that needs addressed please feel free to say so, you won't hurt my feelings. I also cleaned my finger nails after I saw how dirty they are in the pic, lol.
Last edited: