SELLING Parting out 084 (Australia)

[Iron.and.bark]

Saw has a broken av mount point on crankcase, have simply lost the passion to finish it off. Would rather work on other project saws. Saw runs (well did till I pulled it down).

Prices in Australian dollars (multiply by about 0.78 to get US dollars if anyone is interested).

Handle -$40
Sprocket / chain cover -$60
Muffler $130
Cylinder OEM & piston $220
Carb -$25
Crank $100
Nos starter cover (not fitted in pic) $85
Fuel tank $50
Clutch and and new sprocket $50
Oil pump $60
Top cover plastic $30
Decomp valve (new unfitted) $50
Chain break $40

Any other misc parts ask away

 

[skip sail]

whereabouts in oz are you?

 

[Iron.and.bark]

Western Australia (south west)

 

[Stihl working Hard]

How far has the saw been pulled down is it totally stripped to a box of parts

 

[Iron.and.bark]

Half way down, crank case is still together, but like I said has a broken av mount point on crank case, so unless you can tig mag really well, would need to be split anyway

 

[Stihl working Hard]

Half way down, crank case is still together, but like I said has a broken av mount point on crank case, so unless you can tig mag really well, would need to be split anyway

I can get a set of cases if need be how much for the hole lot there

 

[Iron.and.bark]

Clutch, starter,carb & muff sold