NSP2. Cuz PA WiFi sucks

[Lightning Performance]

Those will fit in a open top dumpster.

 

[redline4]

Hey @redline4 any thoughts for this 96 Geo Metro 1.6L 3cyl? Got spark but no power to the coils. Last guy butchered up the wiring, this is what me and bossman have come up with. Can't find a schematic. Power light is good on the wiring, distributor and relays.

Sent from my iPhone using Tapatalk

How can you have spark if there is no power to the coil?
I will see if I can dig you up a schematic tomorrow if you want.
Ignition wiring I assume?
If you cobbled power to it and it works, that's entirely up to you if you want to run with that, but wires just twisted together and left bare is hack at best.
By your pic I honestly have no clue what you have going on there. I haven't been under the hood of one of those piles in probably 18 years.

 

[DuratecMan10]

How can you have spark if there is no power to the coil?
I will see if I can dig you up a schematic tomorrow if you want.
Ignition wiring I assume?
If you cobbled power to it and it works, that's entirely up to you if you want to run with that, but wires just twisted together and left bare is hack at best.
By your pic I honestly have no clue what you have going on there. I haven't been under the hood of one of those piles in probably 18 years.

I worded that one incorrectly. It cranks the interior lights and chime work but no start. So yes, ignition. The last owner screwed with all the wiring so we're trying to piece it back together correctly. Me and my mentor both had a go at it. The test light glows when you put it to all the wires but not the coils, the coils are all new and everything else works fuse and relay wise. If you can get a schematic I'd appreciate it! That would be great. Once we get it right it'll be heat shrinked and put back properly.


Sent from my iPhone using Tapatalk

 

[Stump Shot]

Im living on the edge and draining the gas from the snowblower.
View attachment 229011
51 degrees, so t-shirt here too.

Don't you dare, you do and it will snow 16".

 

[redline4]

Don't you dare, you do and it will snow 16".

Too late.
If it snows it can just stay over by Nic.
I'll take the blame if snowmageddon hits.

 

[redline4]

I worded that one incorrectly. It cranks the interior lights and chime work but no start. So yes, ignition. The last owner screwed with all the wiring so we're trying to piece it back together correctly. Me and my mentor both had a go at it. The test light glows when you put it to all the wires but not the coils, the coils are all new and everything else works fuse and relay wise. If you can get a schematic I'd appreciate it! That would be great. Once we get it right it'll be heat shrinked and put back properly.


Sent from my iPhone using Tapatalk

Ignition and crank/cam sensor schematics.
If you zoom in, they should clear up and be readable.


If you need exact locations of the splices s202, s231, or s101 let me know as I will have to dig out the paper manuals if we still have them as 96 was our first year for online manuals and they are not complete.

 

[stihl livin]

That's not an option though lol


Sent from my iPhone using Tapatalk

No one cares about options it’s what needs done. That car should have been scrapped years ago. Hell I’ve wrecked better cars in demo derbies

 

[huskihl]

Hey @redline4 any thoughts for this 96 Geo Metro 1.6L 3cyl? Got spark but no power to the coils. Last guy butchered up the wiring, this is what me and bossman have come up with. Can't find a schematic. Power light is good on the wiring, distributor and relays.

Sent from my iPhone using Tapatalk

They’re about the same size as a Yugo. Send ‘er off the Mighty Mac

 

[redline4]

 

[huskihl]

 

[Stump Shot]

Too late.
If it snows it can just stay over by Nic.
I'll take the blame if snowmageddon hits.

 

[dall]

you could use another 2 foot

 

[Stump Shot]

you could use another 2 foot

I'd share one with ya...

 

[DuratecMan10]

Ignition and crank/cam sensor schematics.
If you zoom in, they should clear up and be readable.
View attachment 229064 View attachment 229065

If you need exact locations of the splices s202, s231, or s101 let me know as I will have to dig out the paper manuals if we still have them as 96 was our first year for online manuals and they are not complete.

You are the man! Thank you, this is exactly what we needed. If I need the splice locations I'll let you know either tonight or tomorrow. My mentor says thank you as well. I owe ya a beer [emoji481]


Sent from my iPhone using Tapatalk

 

[p61 western]

Good evening fellas.

 

[Czed]

Good evening guy's

 

[Stump Shot]

@Tor R

 

[beaglebriar]

Evening fellers. Check out this POS!! There's a sucker born every minute.

https://buffalo.craigslist.org/mcy/d/fredonia-2017-after-hours-rat-bike/7087946286.html

 

[Czed]

Evening fellers. Check out this POS!! There's a sucker born every minute.

https://buffalo.craigslist.org/mcy/d/fredonia-2017-after-hours-rat-bike/7087946286.html

There's a 661 bored out to a 880 on Facebook
Bargain at 1200.00

 

[GCJenks204]

You are the man! Thank you, this is exactly what we needed. If I need the splice locations I'll let you know either tonight or tomorrow. My mentor says thank you as well. I owe ya a beer [emoji481]


Sent from my iPhone using Tapatalk

I’d really have to question the value of a mentor that likes working on 25 year old crap like that.

I would suggest getting together with @exCanuck he’s at least in to Sidekicks. Has to be a step up from Metros...