High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

NSP2. Cuz PA WiFi sucks

Status
Not open for further replies.

redline4

I'm huge in Japan
Local time
8:51 AM
User ID
5593
Joined
Mar 12, 2018
Messages
13,272
Reaction score
112,271
Location
Rosholt Wisconsin
Country flag
Hey @redline4 any thoughts for this 96 Geo Metro 1.6L 3cyl? Got spark but no power to the coils. Last guy butchered up the wiring, this is what me and bossman have come up with. Can't find a schematic. Power light is good on the wiring, distributor and relays.

a710c4107e6c9508164e8c098b7026d4.jpg



Sent from my iPhone using Tapatalk

How can you have spark if there is no power to the coil?
I will see if I can dig you up a schematic tomorrow if you want.
Ignition wiring I assume?
If you cobbled power to it and it works, that's entirely up to you if you want to run with that, but wires just twisted together and left bare is hack at best.
By your pic I honestly have no clue what you have going on there. I haven't been under the hood of one of those piles in probably 18 years.
 

DuratecMan10

GFY! I'll never be straight !!!
Local time
9:51 AM
User ID
10660
Joined
Oct 8, 2019
Messages
3,822
Reaction score
15,346
Location
Florida
How can you have spark if there is no power to the coil?
I will see if I can dig you up a schematic tomorrow if you want.
Ignition wiring I assume?
If you cobbled power to it and it works, that's entirely up to you if you want to run with that, but wires just twisted together and left bare is hack at best.
By your pic I honestly have no clue what you have going on there. I haven't been under the hood of one of those piles in probably 18 years.

I worded that one incorrectly. It cranks the interior lights and chime work but no start. So yes, ignition. The last owner screwed with all the wiring so we're trying to piece it back together correctly. Me and my mentor both had a go at it. The test light glows when you put it to all the wires but not the coils, the coils are all new and everything else works fuse and relay wise. If you can get a schematic I'd appreciate it! That would be great. Once we get it right it'll be heat shrinked and put back properly.


Sent from my iPhone using Tapatalk
 

redline4

I'm huge in Japan
Local time
8:51 AM
User ID
5593
Joined
Mar 12, 2018
Messages
13,272
Reaction score
112,271
Location
Rosholt Wisconsin
Country flag
I worded that one incorrectly. It cranks the interior lights and chime work but no start. So yes, ignition. The last owner screwed with all the wiring so we're trying to piece it back together correctly. Me and my mentor both had a go at it. The test light glows when you put it to all the wires but not the coils, the coils are all new and everything else works fuse and relay wise. If you can get a schematic I'd appreciate it! That would be great. Once we get it right it'll be heat shrinked and put back properly.


Sent from my iPhone using Tapatalk


Ignition and crank/cam sensor schematics.
If you zoom in, they should clear up and be readable.
20200308_163645.jpg 20200308_163805.jpg

If you need exact locations of the splices s202, s231, or s101 let me know as I will have to dig out the paper manuals if we still have them as 96 was our first year for online manuals and they are not complete.
 

huskihl

Muh fingers look really big
GoldMember
Local time
9:51 AM
User ID
360
Joined
Dec 31, 2015
Messages
23,111
Reaction score
147,650
Location
East Jordan, MI
Country flag
Hey @redline4 any thoughts for this 96 Geo Metro 1.6L 3cyl? Got spark but no power to the coils. Last guy butchered up the wiring, this is what me and bossman have come up with. Can't find a schematic. Power light is good on the wiring, distributor and relays.

a710c4107e6c9508164e8c098b7026d4.jpg



Sent from my iPhone using Tapatalk
They’re about the same size as a Yugo. Send ‘er off the Mighty Mac
 

DuratecMan10

GFY! I'll never be straight !!!
Local time
9:51 AM
User ID
10660
Joined
Oct 8, 2019
Messages
3,822
Reaction score
15,346
Location
Florida
Ignition and crank/cam sensor schematics.
If you zoom in, they should clear up and be readable.
View attachment 229064 View attachment 229065

If you need exact locations of the splices s202, s231, or s101 let me know as I will have to dig out the paper manuals if we still have them as 96 was our first year for online manuals and they are not complete.

You are the man! Thank you, this is exactly what we needed. If I need the splice locations I'll let you know either tonight or tomorrow. My mentor says thank you as well. I owe ya a beer [emoji481]


Sent from my iPhone using Tapatalk
 

GCJenks204

"Special Buns"
Local time
8:51 AM
User ID
367
Joined
Dec 31, 2015
Messages
15,500
Reaction score
98,560
Location
Winnipeg, MB
Country flag
You are the man! Thank you, this is exactly what we needed. If I need the splice locations I'll let you know either tonight or tomorrow. My mentor says thank you as well. I owe ya a beer [emoji481]


Sent from my iPhone using Tapatalk

I’d really have to question the value of a mentor that likes working on 25 year old crap like that.

I would suggest getting together with @exCanuck he’s at least in to Sidekicks. Has to be a step up from Metros...
 
Status
Not open for further replies.
Top