NSP2. Cuz PA WiFi sucks

[Spike60]

Thanks guys!

Closing in 20 minutes. Heat is building. This is going to be a good gin and tonic day.

 

[PA Dan]

Thanks guys!

Closing in 20 minutes. Heat is building. This is going to be a good gin and tonic day.

Thats my plan tonight to Bob![emoji106]

 

[Lightning Performance]

Thats my plan tonight to Bob![emoji106]

Are you making any changes to the 260 build?

 

[PA Dan]

Are you making any changes to the 260 build?

Thinner base gasket and some port work.

 

[Stump Shot]

Thanks guys!

Closing in 20 minutes. Heat is building. This is going to be a good gin and tonic day.

Looks like you have a good plan, enjoy!

 

[ucm931]

Mine is similar to this one. It fits a 026 or 346 assembled case. The 371 fits but not completely submerged. I use Mean Green degreaser from Dollar General at about a 60/40 mix with water. I set the temp for 60c.

What is the fluid capacity of the USC?

 

[PA Dan]

What is the fluid capacity of the USC?

10 Liters

 

[ucm931]

10 Liters

Nice! And here I was thinking the 15L model would be borderline too small. lol

I've been eyeing them for the past couple years. I have a couple of the little harbor freight ones and they work fantastic for small stuff. Might have to sell something and buy me one of the big basturds.......

 

[Stump Shot]

10 Liters

Think a 16 might be enough to do a whole crankcase?

 

[Stump Shot]

A split double!

 

[PA Dan]

Think a 16 might be enough to do a whole crankcase?

Depends on the shape? I got the 371 in it but wasn't completely under water.

 

[Stump Shot]

Nice! And here I was thinking the 15L model would be borderline too small. lol

I've been eyeing them for the past couple years. I have a couple of the little harbor freight ones and they work fantastic for small stuff. Might have to sell something and buy me one of the big basturds.......

Depends on the shape? I got the 371 in it but wasn't completely under water.

I been waiting to go big as well, the stinky old parts washer isn't fun sometimes.

 

[ucm931]

Think a 16 might be enough to do a whole crankcase?

Depends on the shape? I got the 371 in it but wasn't completely under water.

This.......

Looking at a few different models, some are deeper, while some are wider. The 15L unit has my eye.

 

[stihl_head1982]

No go on the link to Amazon but I like the pics.

Perhaps this one? See what you think?

 

[Lightning Performance]

Using this and bagging the parts with cleaning fluid. Or, set up a blast cabinet with a wet blaster, add some cleaner and a siphoning gun for media wet blasting. It's seems good to always have something cooking in the USC. It will get used continuously here.

So are most of you using ten or fifteen liter models?

 

[Lightning Performance]

Interested in this one myself

https://www.amazon.com/s?k=15l+ultrasonic+parts+cleaner&sprefix=15L+Ultra&ref=nb_sb_ss_ts-o-p_2_9

15L 600W heat

 

[ucm931]

Using this and bagging the parts with cleaning fluid. Or, set up a blast cabinet with a wet blaster, add some cleaner and a siphoning gun for media wet blasting. It's seems good to always have something cooking in the USC. It will get used continuously here.

So are most of you using ten or fifteen liter models?

I haven't moved up to the big leagues yet, but if my opinion matters at all, I'd say go for the 15L. Better to have a bit of fudge factor on the high end rather than be left wanting just a hair more. YMMV

 

[PA Dan]

Interested in this one myself

https://www.amazon.com/s?k=15l+ultrasonic+parts+cleaner&sprefix=15L+Ultra&ref=nb_sb_ss_ts-o-p_2_9

15L 600W heat

Here is the dimensions of that one. I'd like to see it be 8 or 10" deep.

 

[cuinrearview]

HBD @Spike60 and @Armbru84 .

 

[ayoungtexan]

Good afternoon fellas