Not so pros 4 new and without politics or drama

[redline4]

Looking good Mr. Ed!

Thanks!


Here's what it sounds like

 

[Stump Shot]

Thanks!


Here's what it sounds like

Sweet! They need a hardon "like" Lol

 

[SawAddictedFarmer]

I made exhaust.
And stuff.

View attachment 484682View attachment 484683View attachment 484684View attachment 484685

How are you welding it? Mig?

 

[redline4]

How are you welding it? Mig?

Yeah. Thats why the welds turned out not so good looking as I could not locally source ER308L wire. Supposed to run straight argon too from what I have been told vs my typical 80/20.
It will suffice for a couple summers until the 6.2 is ready to go in to replace the 5.3 and the exhaust will likely be redone at that time.

 

[Junk Meister]

Good morning guys,
yesterday was a bad day for us, my mother-in-law passed away.
I loved her, she was always so very helpful, everything was about everyone else and never about herself. I still remember to this day when she brought me water every morning, she was always afraid that I would get dehydrated.
And a real hardworking woman she was too, came from Malaysia and worked until she was 89-90 as a seamstress, he is a tailor, and was very skilled at his work.

My wife is trying to get a quick flight home, with the Middle East conflict, simple travel is very difficult, she will probably not make it home before the funeral is over in Singapore.

Some people are not missed until they are gone. I think you were fortunate to appreciate haveng her while you did but but that fact makes the sorrow worserer.. Condolences for your families loss.

 

[SawAddictedFarmer]

Yeah. Thats why the welds turned out not so good looking as I could not locally source ER308L wire. Supposed to run straight argon too from what I have been told vs my typical 80/20.
It will suffice for a couple summers until the 6.2 is ready to go in to replace the 5.3 and the exhaust will likely be redone at that time.

No need for backpurge with mig? I'm not criticizing I'm just curious because I'll need to do some exhaust welding at some point.

 

[Tor R]

Good morning guys

 

[redline4]

No need for backpurge with mig? I'm not criticizing I'm just curious because I'll need to do some exhaust welding at some point.

No clue. The couple articles I read about mig welding stainless didn't mention it.

 

[ray benson]

Good morning. 46°F/8°C going up to 72°F/ 22°C.

 

[Stump Shot]

Good morning. 44°F

 

[Wonkydonkey]

good afternoon fellers

Sunday was a shĩtshow of fun for me.

 

[59billy]

Good morning. 68f reaching 80. Trying to work up enthusiasm for a feed store run.

 

[redline4]

JB weld should work, right?

 

[Wonkydonkey]

JB weld should work, right?

View attachment 484793

It will be good as new with your handy work and the JB stuff

 

[Kiwioilboiler]

Morena E Hoas.

 

[SawAddictedFarmer]

Good afternoon guys

 

[Tor R]

JB weld should work, right?

View attachment 484793

I would just use a can of spray foam and call the day a success.

 

[GCJenks204]

Evening All. Was on the road for work again, need to catch up on some sleep.

@Tor R sorry to hear about your MIL

Welding talk without @dal just seems wrong…

 

[Tor R]

Good afternoon everyone,
I like tools, a bit of a collecting craze
Ordered a micro ratchet yesterday...and bought a 1/4" T handle ratchet + socket today...
So I have to go on a search for a suitable storage system