Not so pros 4 new and without politics or drama

[Stump Shot]

Yes right wrist. Percocet for pain. Hasn't really helped. They also put a nerve block in that supposed to last 36 hours. I can't even move my arm. I can move my fingers but can't even begin to pick up my arm. It crazy.

Hoping you get well soon and back to regular activities again.

 

[Dustin4185]

Morning men. Headed to town to pick up a few supplies for the kitchen remodel. I haven’t posted much about it and awful for no documenting projects, lol. I went to the studs and joists. I had to plane a few and sister the low ones. I replaced one that had a gnarly knot I didn’t like the look of. New duct work insulation since I was right there, new flex to the register boots, new plumbing roughed in and vent stack. I added blocking for the cabinets and made sure my studs were all on plane for new drywall. I replaced all the boxes with adjustable ones since the wife hasn’t decided whether we are tiling the backsplash or not. Ran new wire from each box. I have the can lights, but may do wafer lights instead. The issue is we have 1/2” drywall on top of old lathe/plaster ceilings. With cans, I can just pop some screws in to hold them. I’m not sure how the wafer lights will hold if the clips don’t lay flat. I plan on hanging drywall today when I get back and cabinets next week while the kids are home for fall break. Have a good day gentlemen.

 

[Czed]

Mornin'

I bought this kit to fix threads on a kz1000 hillclimb bike works perfectly
Only like 14.00 I'm ordering all different sizes.

 

[Stump Shot]

Good morning.
With summer like weather and nice fall color, it's a great time to come up to Northern Wisconsin.

 

[Mad Professor]

Weather critters cried Wolf, and called for first frost last night and next two evenings. So I could sleep well, covered the vegetable garden's sensitives (tomato, peppers, squash, basil,...).

Only got to 37 oF and dew point 35. 42 oF 9AM. Now I get to uncover .......

No frosts predicted now for next two days, or in long range forecast.

 

[59billy]

Good morning, fellow fellers.

70f heading for 87. Sunny.

 

[Czed]

Time to price match

 

[timg]

Happy Friiiidaz goons. A little forestry pics and of course a turtle in my garage doorway just cruising. Dog pic too just for the hell of it. Later!!

 

[Tor R]

Good morning guys

 

[cuinrearview]

Time to price matchView attachment 471349

Even better locally
Probably stop after work and grab a couple

 

[cuinrearview]

Good morning Not So's. Got the 'toon out and tucked away last night. Just need to change out the lower unit oil and yank the batt-tree. Probably do the dock tonight.

 

[ray benson]

2 minutes ago
Good morning. 59°F/ 15°C going up to 88°F/ 31°C. Been over a week of no rain.

 

[59billy]

Good morning, noisemakers.

70f heading to 84.

Right hand and low back are acting rusty and arthritic. I've a pain management appointment in a couple weeks, so maybe they can work some magic.

 

[ammoaddict]

Good morning, noisemakers.

70f heading to 84.

Right hand and low back are acting rusty and arthritic. I've a pain management appointment in a couple weeks, so maybe they can work some magic.

I need some magic in my right hand.

 

[59billy]

I need some magic in my right hand.

I hope you get it!

 

[John Wargo]

Happy Friiiidaz goons. A little forestry pics and of course a turtle in my garage doorway just cruising. Dog pic too just for the hell of it. Later!!View attachment 471416View attachment 471417View attachment 471418View attachment 471419

You missed a hell of a race on Saturday Timmy.

 

[John Wargo]

Making good progress on the outside of the building.

 

[Tor R]

We're going to get a good storm this weekend, they say it happens once every 25 years.
Fortunately, we don't have rivers in the valley I should, small streams are all.

 

[Only the Tony]

Running 67°/88° for today. You know a person could have a pretty good weekend with this much beef. Made the run to the processor this morning after dropping the boy at school.

 

[GCJenks204]

Morning/Afternoon All. Made it out of the US last night and now recovering...

Morning men. Headed to town to pick up a few supplies for the kitchen remodel. I haven’t posted much about it and awful for no documenting projects, lol. I went to the studs and joists. I had to plane a few and sister the low ones. I replaced one that had a gnarly knot I didn’t like the look of. New duct work insulation since I was right there, new flex to the register boots, new plumbing roughed in and vent stack. I added blocking for the cabinets and made sure my studs were all on plane for new drywall. I replaced all the boxes with adjustable ones since the wife hasn’t decided whether we are tiling the backsplash or not. Ran new wire from each box. I have the can lights, but may do wafer lights instead. The issue is we have 1/2” drywall on top of old lathe/plaster ceilings. With cans, I can just pop some screws in to hold them. I’m not sure how the wafer lights will hold if the clips don’t lay flat. I plan on hanging drywall today when I get back and cabinets next week while the kids are home for fall break. Have a good day gentlemen.

Don't do wafers, they max out at about 1" think ceilings, more than that they don't stay well. If you want that look I would look at a style like these, they mount to a standard junction box but have the wafer look. The regressed version is my favourite for your application.

Snug 4" LED Recessed DownLight 3000K - Flush Mount - Maxim Lighting

Designed to install snug into a 4-0 junction box, this surface mounted fixture boasts the lowest profile possible similar to recessed lighting. The twist locking trim easily removes for installation with a frame that can be mudded-in for an even more streamlined design. Economically priced, the...

www.maximlighting.com

Snug 4" LED Recessed DownLight 3000K - Flush Mount - Maxim Lighting

Designed to install snug into a 4-0 junction box, this surface mounted fixture boasts the lowest profile possible similar to recessed lighting. The twist locking trim easily removes for installation with a frame that can be mudded-in for an even more streamlined design. Economically priced, the...

www.maximlighting.com

I can probably find you a localish source based on zip or we could drop ship them to you for $14.54 for the flush and $16.15 for the regressed.